Fatigue strength of repaired welded connections made of very high strength steels

Modern steel manufacturing techniques make it possible to produce steel with the nominal yield strength up to 1300 MPa for structural purposes. However, the application of very high strength steels is still limited in the civil engineering structures due to lack of knowledge about the effects of the manufacturing process and experimental results...

Fatigue Assessment of Full-Scale Retrofitted Orthotropic Bridge Decks

Full-scale fatigue tests were performed on two retrofitted orthotropic bridge decks (OBDs). The retrofitting systems consist of adding a second steel plate on the top of the existing deck. The aim is to reduce the stresses at the fatigue-sensitive details and therefore extend the fatigue life of the OBD by stiffening the existing deck plate....

Performance assessment on high strength steel endplate connections after fire

Purpose – This study aims to reveal more information and understanding on performance and failure mechanisms of high strength steel endplate connections after fire. Design/methodology/approach – An experimental and numerical study on seven endplate connections after cooling down from fire temperature of 550°C has...

Mechanical behaviour of adhesive joint under tensile and shear loading

Due to various advantages of Fibre-Reinforced Polymer (FRP) decks, the FRP to steel composite bridge system is being increasingly used in new bridge structures as well as rehabilitation projects for old bridges. This paper focuses on the mechanical behaviours and failure modes of the adhesively-bonded joins between FRP sandwich decks and steel...

Fatigue classification of welded joints in orthotropic steel bridge decks

This dissertation presents the research into fatigue classifications of welded joints in orthotropic steel bridge decks. These classifications are needed to calculate the fatigue life of these joints and should be included in the design codes. For years bridge design was mainly based on static loading. Due to the development of modern light...

The behaviour of trough stiffener to crossbeam connections in orthotropic steel bridge decks

This article describes the behaviour and stress analysis of the crossbeams in orthotropic steel decks with continuous trapezoidal closed stiffeners. The trough stiffener to crossbeam connections, with or without cope holes, influence the behaviour of the crossbeam. The effects can be transferred to effective properties of a beam without cut outs...