Searched for: subject:"steel"
(1 - 20 of 22)

Pages

document
Shakerifard, B. (author)
Global warming, continuous demand on energy from fossil fuels as a limited natural resource, and costumers’ high expectations regarding product quality are three global challenges that the automotive industry is facing. Fuel consumption reduction has a significant impact on preserving fossil fuels, lowering fossil fuel dependency and the CO2...
doctoral thesis 2019
document
Fang, H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)
The magnetic configuration of a ferromagnetic system with mono-disperse and poly-disperse distribution of magnetic particles with inter-particle interactions has been computed. The analysis is general in nature and applies to all systems containing magnetically interacting particles in a non-magnetic matrix, but has been applied to steel...
journal article 2018
document
Versteylen, C.D. (author), Szymański, N. K. (author), Sluiter, M.H.F. (author), van Dijk, N.H. (author)
In recently discovered self healing creep steels, open-volume creep cavities are filled by the precipitation of supersaturated solute. These creep cavities form on the grain boundaries oriented perpendicular to the applied stress. The presence of a free surface triggers a flux of solute from the matrix, over the grain boundaries towards the...
journal article 2018
document
Farahani, H. (author), Xu, W. (author), van der Zwaag, S. (author)
Predicting the effect of alloying elements on the degree of incomplete austenite to bainite transformation in low carbon steels is of great industrial importance. This study introduces an extended Gibbs energy balance model which makes use of an additive approach to calculate the coupled effect of Mn, Si and Mo on the fraction of bainitic...
journal article 2018
document
de Barros, S. (author), Teixeira De Freitas, S. (author), Banea, M.D. (author), Budhe, S. (author), Arouche, M.M. (author), dos Santos, B.L. (author)
In this work, peel tests were used to assess the adhesion quality between carbon fiber reinforced polymers (CFRP) and carbon steel plates. The tests were performed according to the ASTM standard of floating roller peel tests (D3167–97) with a new specimen layup. The layup and geometry of specimens was defined in order to have the CFRP as the...
conference paper 2016
document
Farias Moreno, D.E. (author)
Weight reduction of car bodies can be achieved by application of steel components with a lower thickness; however mechanical properties (for constructive and safety reasons) must be maintained, which can be achieved by using (U)HSS steels. These steels have been designed and optimized for improved mechanical behavior and therefore normally have...
doctoral thesis 2014
document
Tirumalasetty, G.K. (author), Fang, C.M. (author), Jansen, J. (author), Yokosawa, T. (author), Boeije, M.J.F. (author), Sietsma, J. (author), Van Huis, M.A. (author), Zandbergen, H.W. (author)
Chromium (Cr), Manganese (Mn), and Carbon (C) are well known alloying elements used in technologically important alloy steels and advanced high strength steels. It is known that binary CrCx and MnCx carbides can be formed in steels, but in this study we reveal for the first time that Cr and Mn were found combined in novel ternary cementite type ...
journal article 2014
document
Koleva, D.A. (author), Jonkers, H.M. (author), van Breugel, K. (author)
The improvement of material properties of cement-based materials e.g. reduced permeability, porosity, uniform distribution of hydration products, etc. is of a significant importance and related to durability and sustainability of concrete and reinforced concrete structures. With this respect, a recent and novel approach is to "create" self...
journal article 2013
document
Santillana, M.B. (author)
Nowadays a vast majority of the steel produced worldwide is via the continuous casting process route because this is the most low-cost, efficient and high quality method to mass produce metal products in a variety of sizes and shapes. Most of the continuous casters are the initial manufacturing step of a product which is very close to the final...
doctoral thesis 2013
document
Chen, H. (author)
Mechanical properties of low alloyed steels are directly determined by their microstructures. Thanks to versatility in their microstructures, the mechanical properties of low alloyed steels are much more adjustable than other materials. In the industry, one of the most effective ways to obtain the microstructure for the targeted mechanical...
doctoral thesis 2013
document
Langelaan, G. (author), Zhang, S. (author), Brück, E. (author), Van der Zwaag, S. (author), Van Dijk, N.H. (author)
Abstract only.
conference paper 2013
document
Van Heel, D.D. (author), Maas, T. (author), De Gijt, J.G. (author), Said, M. (author)
This paper describes quay wall and bridge designs in different materials, which are compared with regard the the CO2-emission and the Life Cycle Analysis (LCA). For this study the requirements and boundary conditions from the Euromax Terminal quay wall, in the Port of Rotterdam, have been used. The preliminary designs of the quay wall (made...
conference paper 2011
document
Van Dijk, N.H. (author), He, S. (author), Paladugu, M. (author), Schut, H. (author), Van der Zwaag, S. (author)
conference paper 2011
document
Van der Aa, E.M. (author)
One of the major problems during welding of thin plate structures is the occurrence of buckling distortion. This type of distortion is caused by the formation of compressive welding stresses; when these stresses exceed a certain critical stress level, the structure will buckle. Most methods for eliminating the welding induced buckling distortion...
doctoral thesis 2007
document
Koleva, D.A. (author), De Wit, J.H.W. (author), Van Breugel, K. (author), Lodhi, Z.F. (author), Van Westing, E. (author)
The electrochemical behavior of steel reinforcement in conditions of corrosion and cathodic protection was studied, using electrochemical impedance spectroscopy (EIS) and compared to reference (noncorroding) conditions. Polarization resistance (PR) method and potentiodynamic polarization (PDP) were employed as well, in addition to ac 2 pin...
journal article 2007
document
Koleva, D.A. (author), Van breugel, K. (author), De Wit, J.H.W. (author), Van Westing, E. (author), Boshkov, N. (author), Fraaij, A.L.A. (author)
The behavior of steel reinforcement was studied using electrochemical impedance spectroscopy (EIS) and polarization resistance (PR) techniques in conditions of chloride-induced corrosion in ordinary Portland cement-mortar specimens immersed in 7% NaCl for a test period of 120 days and compared to specimens immersed in demineralized water for the...
journal article 2007
document
de Jong, F.B.P. (author)
This dissertation presents the research into renovation techniques for orthotropic steel bridge decks. These techniques are needed to solve fatigue problems in the decks of these bridges, as several fatigue cracks have been detected in the deck structure of these bridges the last decade. A well-known example of fatigue cracks are those observed...
doctoral thesis 2007
document
Thiessen, R.G. (author)
Abstract not available
doctoral thesis 2006
document
Smith, A. (author)
Abstract not available
doctoral thesis 2006
document
Van Bohemen, S.M.C. (author)
Steel is one of the most commonly used materials today, especially in industrial sectors such as ship building and the automotive industry. In order to meet the requirements for steel applications, new multi-phase steels are being developed. The microstructure of these steels consists of a variety of different phases, which leads to superior...
doctoral thesis 2004
Searched for: subject:"steel"
(1 - 20 of 22)

Pages