A novel 3D mixed-mode multigrain model with efficient implementation of solute drag applied to austenite-ferrite phase transformations in Fe-C-Mn alloys

A computational 3D model that accounts for both nucleation and interface migration is a very useful tool to monitor and grasp the complexity of microstructure formation in low-alloyed steels. In the present study we have developed a 3D mixed-mode multigrain model for the austenite-ferrite and the austenite-ferrite-austenite formation capable...

Delamination toughening in a low carbon microalloyed steel plate rolled in the dual-phase region

It is still a big challenge to obtain excellent low-temperature toughness for bulk steel materials. Delamination is an effective method to improve low-temperature toughness. In the present study, delamination toughening in a low carbon microalloyed steel plate with elongated and ultrafine-grained microstructure rolled in the dual-phase region...

Solid state phase transformations in steels: a neutron and synchrotron radiation study

Solid-state phase transformations in steels cover a broad range of aspects. The underlying physics behind these phase transformations usually include nucleation, diffusion, lattice reconstruction and interactions between solutes and grain boundaries and interfaces. These features and the fact that the events take place at high temperatures, in...

Self healing of creep damage in iron-based alloys by supersaturated tungsten

When metals are mechanically loaded at elevated temperatures for extended periods of time, creep damage will occur in the form of cavities at grain boundaries. In the present experiments it is demonstrated that in binary iron-tungsten alloys creep damage can be self healed by selective precipitation of a W-rich phase inside these cavities. Using...

Modelling study on the three-dimensional neutron depolarisation response of the evolving ferrite particle size distribution during the austenite–ferrite phase transformation in steels

The magnetic configuration of a ferromagnetic system with mono-disperse and poly-disperse distribution of magnetic particles with inter-particle interactions has been computed. The analysis is general in nature and applies to all systems containing magnetically interacting particles in a non-magnetic matrix, but has been applied to steel...

Structural tale of two novel (Cr,Mn)C carbides in steel

Chromium (Cr), Manganese (Mn), and Carbon (C) are well known alloying elements used in technologically important alloy steels and advanced high strength steels. It is known that binary CrCx and MnCx carbides can be formed in steels, but in this study we reveal for the first time that Cr and Mn were found combined in novel ternary cementite type ...

Novel ultrafine Fe(C) precipitates strengthen transformation-induced-plasticity steel

A transmission electron microscopy study was conducted on nanoprecipitates formed in Ti microalloyed transformation-inducedplasticity-assisted steels, revealing the presence of Ti(N), Ti2CS and a novel type of ultra-fine Fe(C) precipitate. The matrix/precipitate orientation relationships, sizes and shapes were investigated in detail. The...

Characterization of NbC and (Nb, Ti)N nanoprecipitates in TRIP assisted multiphase steels

Multiphase steels utilising composite strengthening may be further strengthened via grain refinement or precipitation by the addition of microalloying elements. In this study a Nb microalloyed steel comprising martensite, bainite and retained austenite has been studied. By means of transmission electron microscopy (TEM), we have investigated the...