Searched for: subject:"steel"
(61 - 80 of 162)

Pages

document
Van Tol, R.T. (author)
This thesis studies the effect of plastic deformation on the stability of the austenitic microstructure against martensitic transformation and diffusional decomposition and its role in the phenomenon of delayed fracture in austenitic manganese (Mn)-based TWinning Induced Plasticity (TWIP) steels. The transformation to alpha’-martensite upon...
doctoral thesis 2014
document
Blondé, R. (author)
TRIP steel is a material providing great mechanical properties. Such steels show a good balance between high-strength and ductility, not only as a result of the fine microstructure, but also because of the well-known TRIP effect. The Transformation Induced-Plasticity (TRIP) phenomenon is the transformation of the soft metastable austenite phase...
doctoral thesis 2014
document
Liu, X. (author), Tzimiris, G. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...
conference paper 2014
document
Stepinac, M. (author), Hunger, F. (author), Tomasi, R. (author), Serrano, E. (author), Rajcic, V. (author), Van de Kuilen, J.W.G. (author)
conference paper 2013
document
Koleva, D.A. (author), Jonkers, H.M. (author), van Breugel, K. (author)
The improvement of material properties of cement-based materials e.g. reduced permeability, porosity, uniform distribution of hydration products, etc. is of a significant importance and related to durability and sustainability of concrete and reinforced concrete structures. With this respect, a recent and novel approach is to "create" self...
journal article 2013
document
McGarrity, K.S. (author)
Microstructural banding is explored in 2D and 3D using serial sectioned micrographs. The banding is quantified using two parameters called the Band Continuity Index Cb and the Perpendicular Continuity Index Cp. The indexes determined from the 2D micrographs is shown to be sufficient for estimating the distribution of the bands in 3D. A...
doctoral thesis 2013
document
Dere, E.G. (author)
The research presented in this thesis aims at deepening our understanding of the formation of the microstructure of steel during thermal processing in order to control the microstructure and thereby improve the fire-resistance of low-alloy steel. The strength of steel decreases during a fire mainly due to the following changes in the...
doctoral thesis 2013
document
Tirumalasetty, G.K. (author), Van Huis, M.A. (author), Kwakernaak, C. (author), Sietsma, J. (author), Sloof, W.G. (author), Zandbergen, H.W. (author)
A combination of Electron Back-Scattered Diffraction (EBSD) and high-sensitivity Electron Probe Micro-Analysis (EPMA) was used to correlate the changes in microstructural features upon deformation with local chemical composition in Transformation-Induced Plasticity steels. A novel cleaning procedure was developed that allows complete monitoring...
journal article 2013
document
Leon-Garcia, O. (author)
doctoral thesis 2013
document
Qiang, X. (author)
The aim of this research is to reveal more information and understanding on behaviour and failure mechanisms of high strength steel endplate connections (combining high strength steel endplates with either mild steel or high strength steel beams and columns in endplate connections) in fire and after fire, for an effective application of high...
doctoral thesis 2013
document
Santillana, M.B. (author)
Nowadays a vast majority of the steel produced worldwide is via the continuous casting process route because this is the most low-cost, efficient and high quality method to mass produce metal products in a variety of sizes and shapes. Most of the continuous casters are the initial manufacturing step of a product which is very close to the final...
doctoral thesis 2013
document
Chen, H. (author)
Mechanical properties of low alloyed steels are directly determined by their microstructures. Thanks to versatility in their microstructures, the mechanical properties of low alloyed steels are much more adjustable than other materials. In the industry, one of the most effective ways to obtain the microstructure for the targeted mechanical...
doctoral thesis 2013
document
Cordioli, C. (author), Bauters, E. (author), Muselle, T. (author), Hubin, A. (author)
Commonly coatings are used to protect metals from corrosion. Different types of coatings are available and according to their characteristics they provide different levels of protection. In order to evaluate the performance of the coating, it is fundamental to have a methodology that is reliable and efficient even when applied to different kinds...
conference paper 2013
document
Liu, Q. (author), Schlangen, H.E.J.G. (author), Van Bochove, G. (author)
Porous asphalt shows excellent performance in both noise reduction and water drainage. Although porous asphalt has these great qualities, its service life is much shorter (sometimes only half) compared to dense graded asphalt roads. Ravelling, which is the loss of aggregate particles from the surface layer, is the main damage mechanism of porous...
conference paper 2013
document
Dong, B. (author), Wang, Y. (author), Han, N. (author), Xing, F. (author)
Based on microcapsule technology, a new type of self-healing system for cementitious composites is established. The performance of the system was characterized by means of electrochemical impedance spectroscopy of steel bars immersed in a simulated concrete environment. The results demonstrate strong inhibition of chloride-induced corrosion when...
conference paper 2013
document
Langelaan, G. (author), Zhang, S. (author), Brück, E. (author), Van der Zwaag, S. (author), Van Dijk, N.H. (author)
Abstract only.
conference paper 2013
document
Liu, Q. (author), Schlangen, H.E.J.G. (author), Van Bochove, G. (author)
Porous asphalt shows excellent performance in both noise reduction and water drainage. Although porous asphalt has these great qualities, its service life is much shorter (sometimes only half) compared to dense graded asphalt roads. Ravelling, which is the loss of aggregate particles from the surface layer, is the main damage mechanism of porous...
conference paper 2013
document
Tran, T.H. (author), Vimalanandan, A. (author), Crespy, D. (author), Fickert, J. (author), Landfester, K. (author), Kron, J. (author), Schottner, G. (author), Egly, K. (author), Sextl, G. (author), Jobmann, M. (author), Paulke, B. (author), Börner, F. (author), Rohwerder, M. (author)
Abstract only.
conference paper 2013
document
Jiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
Due to various advantages of Fibre-Reinforced Polymer (FRP) decks, the FRP to steel composite bridge system is being increasingly used in new bridge structures as well as rehabilitation projects for old bridges. This paper focuses on the mechanical behaviours and failure modes of the adhesively-bonded joins between FRP sandwich decks and steel...
conference paper 2013
document
Mueller, F. (author), Schouten, R.N. (author), Brauns, M. (author), Gang, T. (author), Lim, W.H. (author), Lai, N.S. (author), Dzurak, A.S. (author), Van der Wiel, W.G. (author), Zwanenburg, F.A. (author)
We report the characterisation of printed circuit boards (PCB) metal powder filters and their influence on the effective electron temperature which is as low as 22 mK for a quantum dot in a silicon MOSFET structure in a dilution refrigerator. We investigate the attenuation behaviour (10 MHz–20 GHz) of filter made of four metal powders with a...
journal article 2013
Searched for: subject:"steel"
(61 - 80 of 162)

Pages