Searched for: subject%3A%22steel%22
(161 - 180 of 410)

Pages

document
Liu, X. (author), Kasbergen, C. (author), Li, J (author), Scarpas, Athanasios (author), Tzimiris, G. (author)
The adhesive bonding strength of the membrane layers between the asphalt concrete surface layers and the decks of steel bridges has a strong influence on the fatigue life of orthotropic steel deck bridges (OSDBs). The interfacial properties between the membrane and the layers bonded to it have not been extensively studied in the current...
journal article 2020
document
Vercruysse, Florian (author), Celada-Casero, Carola (author), Linke, Bernd M. (author), Verleysen, Patricia (author), Petrov, R.H. (author)
Because of their excellent combination of strength and ductility, quenching and partitioning (Q & P) steels have a great chance of being added to the third generation of advanced high strength steels. The large ductility of Q & P steels arises from the presence of 10% to 15% of retained austenite which postpones necking due to the...
journal article 2020
document
Jing, Guoqing (author), Wang, Jingru (author), Wang, Haoyu (author), Siahkouhi, Mohammad (author)
Recently, implementing steel slag ballast has been proposed as an appropriate material to substitute stone ballast. In this regard, one of the technical concerns is the behavior of steel slag ballast in both time and frequency domains that needs to be assessed, properly. Furthermore, the combination of stone ballast and steel slag is...
journal article 2020
document
Cao, Xiaoluo (author), Wu, Linmei (author), Li, Z. (author)
A computational model for studying the mechanical performance of steel-concrete columns under combined torsion is established via ABAQUS. The model is validated by experimental results. Through numerical simulations, the influence of the axial load ratio, torsion-bending ratio, concrete strength, steel ratio, longitudinal reinforcement ratio,...
journal article 2020
document
Navarro Lopez, A. (author), Hidalgo Garcia, J. (author), Sietsma, J. (author), Santofimia, Maria Jesus (author)
The initial formation of athermal martensite was proven to accelerate the subsequent bainite formation kinetics during isothermal holdings below the martensite-start temperature (M<sub>s</sub>). The presence of prior athermal martensite (PAM) within the phase mixture is expected to modify the overall mechanical response of these newly...
journal article 2020
document
Ariza-Echeverri, E. A. (author), Masoumi, M. (author), Nishikawa, A.S. (author), Mesa, D. H. (author), Marquez-Rossy, A. E. (author), Tschiptschin, A. P. (author)
A novel quenching and partitioning process (Q&amp;P) including the hot stamping (HS) process was studied, using two stamping temperatures (750 °C and 800 °C) and two quenching temperatures (318 °C and 328 °C). This combination is here called Hot Stamping and Quenching and Partitioning process (HSQ&amp;P). The partitioning step was performed...
journal article 2020
document
Liu, X. (author), Wang, Yuanqing (author), Ban, Huiyong (author), Liu, Ming (author), Veljkovic, M. (author), Bijlaard, F.S.K. (author)
Application of longitudinally profiled (LP) steel plate in the flange of flexural members may provide a good solution to optimize their mechanical performance and to improve the efficiency of steel use, whilst existing design codes provide no design guidance or prediction methodology for such advanced beams in terms of flexural behaviour. To...
journal article 2020
document
Yu, H. (author), Xu, W. (author), van der Zwaag, S. (author)
In this work, we combine a generic alloy-by-design model with a novel concept, the nucleation barrier for the formation of Laves phase to fill the creep cavities, in order to develop multi-component creep resistant steels with kinetically tuned self-healing behaviour. In the model the high-temperature long-term strength is estimated by...
journal article 2020
document
Yang, F. (author), Veljkovic, M. (author), Liu, Yuqing (author)
Numerical analyses incorporating appropriate damage models provide an opportunity to predict the strength and deformation capacity of steel structures. This paper presents a practical calibration for the ductile damage model of S355 and high-strength steel S690Q, S700MC, S960Q based on tensile coupon test results. A combined linear and power...
journal article 2020
document
Xiong, Yongming (author), Li, Chuanxi (author), Chen, Zhuoyi (author), He, Jun (author), Xin, H. (author)
Residual stresses change the stress ratio of fluctuating stresses, hence seriously affect the fatigue life of orthotropic steel decks (OSDs) under traffic loading. Residual stress distributions near the U rib-diaphragm joints are very complicated and need to be investigated further. In this paper, a systematic method has been proposed for...
journal article 2020
document
Hidalgo Garcia, J. (author), Vittorietti, M. (author), Farahani, H. (author), Vercruysse, F. (author), Petrov, R.H. (author), Sietsma, J. (author)
Understanding the local strain enhancement and lattice distortion resulting from different microstructure features in metal alloys is crucial in many engineering processes. The development of heterogeneous strain not only plays an important role in the work hardening of the material but also in other processes such as recrystallization and...
journal article 2020
document
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Zhiping (author)
In this paper, we experimentally studied the external surface crack growth in steel pipes reinforced with Composite System Repaired (CRS). CRS reinforced surface cracked API 5L X65 pipes were tested, containing three initial notch sizes and four reinforcement schemes. During the tests, the crack growth results, as well as the strain on the...
journal article 2020
document
Marques Pereira, V. (author), Schut, H. (author), Sietsma, J. (author)
An approach to improve the performance of steels for fusion reactors is to reinforce them with oxide nanoparticles. These can hinder dislocation and grain boundary movement and trap radiation-induced defects, thus increasing creep and radiation damage resistance. The present work investigates the thermal stability of the microstructure and...
journal article 2020
document
Coelho, L. B. (author), Fava, E. B. (author), Kooijman, A.M. (author), Gonzalez Garcia, Y. (author), Olivier, M. G. (author)
The effect of sodium molybdate in inhibiting galvanic corrosion of Zn coating and mild steel is addressed. The inhibitor's performance was appraised by Zero Resistance Ammeter on HDG/mild steel galvanic coupling model in 0.05 M NaCl (+5 mM Na<sub>2</sub>MoO<sub>4</sub>) media. The effectiveness of Na<sub>2</sub>MoO<sub>4</sub> was evaluated...
journal article 2020
document
Laghi, V. (author), Palermo, Michele (author), Gasparini, Giada (author), Veljkovic, M. (author), Trombetti, Tomaso (author)
Early investigations suggest that the use of Additive Manufacturing (AM) technologies for construction has the potential to decrease labor costs, reduce material waste, and create customized complex geometries that are difficult to be manufactured using conventional construction techniques. Nevertheless, the full exploitation of AM...
journal article 2020
document
Ioannidou, C. (author), Navarro Lopez, A. (author), Rijkenberg, Arjan (author), Dalgliesh, Robert M. (author), Koelling, Sebastian (author), Pappas, C. (author), Sietsma, J. (author), van Well, A.A. (author), Offerman, S.E. (author)
In-situ Small-Angle Neutron Scattering (SANS) is used to determine the time evolution of the chemical composition of precipitates at 650 °C and 700 °C in three micro-alloyed steels with different vanadium (V) and carbon (C) concentrations. Precipitates with a distribution of substoichiometric carbon-to-metal ratios are measured in all steels....
journal article 2020
document
Fu, J. (author), Brouwer, J.C. (author), Hendrikx, R.W.A. (author), Richardson, I.M. (author), Hermans, M.J.M. (author)
The present work deals with oxide dispersion strengthened (ODS) Eurofer steel fabricated by powder metallurgy involving mechanical alloying and spark plasma sintering. A heat treatment route including normalising and tempering was applied to the as-produced steel, based on differential scanning calorimetry (DSC) measurement. The...
journal article 2020
document
Tanzer, Samantha Eleanor (author), Blok, K. (author), Ramirez, Andrea (author)
This paper explores the potential of achieving negative emissions in steelmaking by introducing bioenergy with carbon capture and storage (BECCS) in multiple steelmaking routes, including blast furnace and HIsarna smelt reduction, and Midrex and ULCORED direct reduction. Process modelling and life cycle assessment were used to estimate CO<sub...
journal article 2020
document
Rossi, E. (author), Polder, R.B. (author), Copuroglu, Oguzhan (author), Nijland, Timo (author), Šavija, B. (author)
Although reinforcement corrosion is a well-known issue, which are the locations of the steel/concrete interface most sensitive to pitting corrosion is still an unclear issue. In this study, X-ray computed tomography is used to characterize eight 20-years-old reinforced concrete cores naturally deteriorated due to chloride-induced corrosion....
journal article 2020
document
Yu, H. (author)
The development in computational simulation techniques has brought significant progress in the realization of computational alloy design. The advantages are most significant when developing novel materials of which the research &amp; development cycles are particularly time and energy (and hence cost) consuming, such as high-temperature alloys....
doctoral thesis 2019
Searched for: subject%3A%22steel%22
(161 - 180 of 410)

Pages