Searched for: subject%3A%22strain%255C+gauges%22
(1 - 13 of 13)
document
Stokman, Charlotte (author)
The energy market is growing and noise regulations for offshore foundation pile installation grow stricter. New initiatives arise to comply with the ongoing developments in the field, such as the BLUE Piling Technology under development by IQIP. Its features are presented as reduced underwater noise levels during installation, which is attibuted...
master thesis 2023
document
de Rooij, Rens (author)
This research presents a measurement method for a compliant gripper finger, whereby the location of the contact with an object and the exerted grasp force are measured indirectly, instead of directly on the contacting surface. For this purpose, the deformation is measured using strain gauges at two locations on the inside structure of the finger...
master thesis 2023
document
Jurisson, A. (author), Timmermans, Huub (author), Eussen, Bart (author), de Visser, C.C. (author), De Breuker, R. (author)
A ground vibration test was conducted with a 1:3 scaled Diana 2 glider model where the modal parameters were estimated using the accelerometers, gyroscopes and strain gauges integrated in the test aircraft and validated using externally attached calibrated accelerometers and commercial software. These modal parameters were then used to update...
conference paper 2022
document
Cleijpool, Bram (author)
The detachment of a product from a suction cup gripper is a challenge that emerged in recent years in the high-speed case packing of packaged food. In this industry suction cups are used to temporarily attach a product to a case packing robot. The detachment of products from the suction cup gripper threatens throughput. In, some cases, the...
master thesis 2021
document
Baldassarre, Alessandro (author), Ocampo, Juan (author), Martinez, Marcias (author), Rans, C.D. (author)
The application of strain gauges as recommended by the ASTM standards provides accurate strain measurements in isotropic materials. However, their use in composite materials becomes more challenging due to their anisotropic nature. In this study, we hypothesized that the use of the distributed sensing system and the three-dimensional digital...
journal article 2020
document
Stevens, D. (author)
The graduation project This graduation project was executed for EDS – Casting & Forging B.V. (EDS). EDS (Engineering Design and Supply) is a company which is particularly involved in the designing of products and parts for other companies. These are metal products or parts which are mostly produced by casting. EDS reduces the weight and costs by...
master thesis 2017
document
Gaio, N. (author), van Meer, B. (author), Quiros Solano, W.F. (author), Bergers, L. (author), van de Stolpe, A. (author), Mummery, CL (author), Sarro, Pasqualina M (author), Dekker, R. (author)
Organ-on-Chips (OOCs) are micro-fabricated devices which are used to culture cells in order to mimic functional units of human organs. The devices are designed to simulate the physiological environment of tissues in vivo. Cells in some types of OOCs can be stimulated in situ by electrical and/or mechanical actuators. These actuations can mimic...
journal article 2016
document
Westerveld, W.J. (author)
We demonstrated that photonic micro-ring resonators can be used in micro-machined ultrasound microphones. This might cause a breakthrough in array transducers for ultrasonography; first because optical multiplexing allows array interrogation via one optical fiber and second because the silicon-on-insulator technology allows cost-effective...
doctoral thesis 2014
document
Gaitas, A. (author)
This dissertation aims to advance the current state of cantilevers with integrated metal thermal and deflection sensing elements. Metallic sensing elements enable the use of alternative substrate materials (such as polymers), that tend to exhibit higher compliance properties and are more robust (less brittle) compared to Si or Si3N4 cantilevers....
doctoral thesis 2013
document
Den Engelse, J.A. (author)
Load Sensing Bearing (LSB) units are based on the measurement of the elastic deformation of the outer ring of the bearing unit usually using strain gauges which are placed along the circumference of the bearing. The master thesis is aimed at estimating the lateral tire force of a vehicle wheel using the vehicle wheel bearing hub unit which is...
master thesis 2013
document
Haans, W. (author)
doctoral thesis 2011
document
Hou, Y. (author)
master thesis 2010
document
Baljeu, J.F. (author)
A three-component internal strain-gauge balance for use in a cryogenic wind tunnel has been developed by NLR. With this balance model tests were performed in the NASA 0.3-m Transonic Cryogenic Tunnel. The results are discussed with a view to the development of strain-gauge balances for the ETW.
report 1988
Searched for: subject%3A%22strain%255C+gauges%22
(1 - 13 of 13)