Searched for: subject%3A%22sustainably%22
(1 - 20 of 1,174)

Pages

document
van den Berge, R.B.R. (author)
Our production and consumption patterns of electronic products exceed the limits of what one planet can handle. Prolonging product lifetimes decreases the value losses caused by the destruction of existing products and lowers the amount of e-waste. Repair is an impactful strategy to tackle the issues associated with the production and...
doctoral thesis 2024
document
Janssen, C. (author)
Although social objectives are frequently part of the pursuit of sustainable urban development, how such social sustainability goals can be achieved in urban development practices remains a largely unsolved puzzle. While scholars increasingly acknowledge that urban social sustainability is a plural concept that needs to be specified in...
doctoral thesis 2024
document
Zhu, Xuezhen (author), Zhang, Minghu (author), Shi, Jinyan (author), Weng, Yiwei (author), Yalçınkaya, Çağlar (author), Šavija, B. (author)
High-strength engineered cementitious composites (ECC) typically require higher cement content, which is negative from the sustainability point of view. To alleviate this problem, herein a low-cost and eco-friendly high-strength ECC (with a compressive strength of over 100 MPa) was developed, and diatomite was used to replace a small amount...
journal article 2024
document
Medaglia, Rony (author), Rukanova, B.D. (author), Zhang, Ziyan (author)
The transition from a linear economy towards a circular economy (CE), based on reusing, repairing, refurbishing, and recycling existing materials and products, is one of the key priorities in pursuing Sustainable Development Goals (SDGs), where governments play a fundamental role, with the support of digital technologies.<br/><br/>Despite the...
journal article 2024
document
Procaccini, Giulia (author), Prieto, Alejandro (author), Knaack, U. (author), Monticelli, Carol (author), Konstantinou, T. (author)
The European building stock demands urgent renovation due to the age of the buildings, their expected lifetime, and their excessive energy consumption, which accounts for more than a third of the EU’s total emissions. However, the complexities involved, such as time, costs, and structural modifications, often discourage clients, tenants, and...
journal article 2024
document
Kuś, A.M. (author), Mota, Nelson (author), van Bueren, Ellen (author), Carmona Báez, Antonio (author), Asselbergs, M.F. (author)
The urgency of addressing housing challenges in low-income areas is increasing due to widening socio-economic inequalities and the worsening impact of natural disasters. Saint Martin, a small Caribbean island, is struggling to provide affordable housing amidst hurricanes, floods, and heat waves. As a result, there has been a rise in self...
journal article 2024
document
Thonemann, Nils (author), Saavedra-Rubio, Karen (author), Pierrat, Eleonore (author), Dudka, Katarzyna (author), Bangoura, Mathilde (author), Baumann, Nils (author), Bentheimer, Christian (author), Caliandro, Priscilla (author), De Breuker, R. (author)
Hybrid-electric aircraft represent a promising solution for the urgent need to decarbonize short-haul flights and bolster aviation sustainability. Nevertheless, the realization of hybrid-electric aircraft demands rigorous environmental impact analysis, given the substantial investments, time, and research required for technology development....
journal article 2024
document
Baqershahi, Mohammad Hassan (author), Ayas, C. (author), Ghafoori, Elyas (author)
Wire arc additive manufacturing (WAAM) enables the manufacturing of efficient and lightweight structural elements in which material can be utilised wherever needed in an optimised shape, in contrast to standard prismatic profiles used in construction. However, the specific energy consumption (SEC) of WAAM is higher than that of conventional...
journal article 2024
document
Onencan, A. M. (author), Ou, J. (author), de Koning, J.I.J.C. (author)
The Netherlands Climate Change Agreement aims to reduce CO<sub>2</sub> emissions and seismic events by halting natural gas usage by 2050. This will require widespread societal acceptance by 90% of households. The study investigates the social acceptance of a district heating network (DHN) among social housing tenants in Haarlem, Netherlands....
journal article 2024
document
Bakhuis, J.J. (author), Kamp, L.M. (author), Barbour, Natalia (author), Chappin, E.J.L. (author)
This paper systematically reviews the literature on sociotechnical multi-system innovation frameworks that broaden the usual focus on one sociotechnical system to encompass influences from multiple systems. The review includes 75 peer-reviewed papers that span a broad range of energy-demanding systems and mainly build upon the core frameworks...
journal article 2024
document
Imron, M.F. (author), Hestianingsi, Wa Ode Ayu (author), Putranto, Trisnadi Widyaleksono Catur (author), Citrasari, Nita (author), Abdullah, Siti Rozaimah Sheikh (author), Hasan, Hassimi Abu (author), Kurniawan, Setyo Budi (author)
Increasing aquaculture cultivation produces large quantities of wastewater. If not handled properly, it can have negative impacts on the environment. Constructed wetlands (CWs) are one of the phytoremediation methods that can be applied to treat aquaculture effluent. This research was aimed at determining the performance of Cyperus rotundus...
journal article 2024
document
Janssen, M. (author), Zuidema, J (author), Wanhill, R.J.H. (author)
In this second edition, which is the result of numerous revisions, updates and additions, the authors cover the basic concepts of fracture mechanics for both the linear elastic and elastic-plastic regimes. The fracture mechanics parameters K, G, J and CTOD are treated in a basic manner along with the test methods to determine critical values....
book 2024
document
Liu, S. (author), Zhou, Yangxiao (author), Eiman, Fatima (author), McClain, M.E. (author), Wang, Xu sheng (author)
To cope with the groundwater depletion problem and achieve sustainable groundwater development, groundwater conservation measures and managed aquifer recharge (MAR) have been implemented worldwide. However, knowledge gaps exit how does the aquifer system respond to these interventions differently and if these interventions are adequate to...
journal article 2024
document
Liao, X. (author), Saeednia, M. (author), Nogal Macho, M. (author), Tavasszy, Lorant (author)
Large-scale electrification of heavy-duty road freight faces challenges including scarcity of charging infrastructure and high battery costs. Dynamic charging could help overcome these challenges by enabling trucks to charge while driving. Important additional benefits for carriers related to lower required sizes and longer lifetimes of...
journal article 2024
document
Nguyen-Phuoc, Duy Quy (author), Truong, Thi Minh (author), Nguyen, Minh Hieu (author), Pham, Huong Giang (author), Li, Z. (author), Oviedo-Trespalacios, O. (author)
Transitioning to electric motorcycles (EMs) can reduce dependence on carbon-based fuels, mitigate air pollution, and lower greenhouse gas emissions in countries where motorcycles dominate the transportation landscape. However, the factors influencing fleet electrification in these countries remain largely unknown. Given that this challenge...
journal article 2024
document
Xevgenos, Dimitris (author), Tourkodimitri, K. Panteleaki (author), Mortou, M. (author), Mitko, K. (author), Sapoutzi, D. (author), Stroutza, D.E. (author), Turek, M. (author), van Loosdrecht, Mark C.M. (author)
Circular economy has become a popular subject, attracting attention from academics, practitioners, and policy-makers alike. However, despite the excitement surrounding it, the concept of circular economy has been criticized for being vague and having multiple interpretations from different fields. As a result, there is a lack of evidence and...
journal article 2024
document
van Nieuwenhuizen, Kim E. (author), Friedericy, Hans J. (author), van der Linden, Sjaak (author), Jansen, F.W. (author), van der Eijk, A.C. (author)
Objective: To determine the user experience of wearing comfort of reusable sterile surgical gowns and compare these gowns with conventional disposable surgical gowns. Design: Cross-sectional survey. Setting: An academic hospital in the Netherlands. Population: Gynaecologists, surgeons, residents and operating room assistants (n=80). Methods:...
journal article 2024
document
Klok, J.W.A. (author), Groenewegen, Jessica (author), Temmerman, Olivier (author), Van Straten, Niels (author), van Straten, Bart (author), Dankelman, J. (author), Horeman, T. (author)
Objective: Cemented total hip arthroplasty (THA) demonstrates superior survival rates compared to uncemented procedures. Nevertheless, most younger patients opt for uncemented THA, as removing well-fixed bone cement in the femur during revisions is complex, particularly the distal cement plug. This removal procedure often increases the risk...
journal article 2024
document
Janssen, C. (author)
Pursuing people-centered planning practices (PCPs) such as participatory approaches demands a better understanding of how their operationalization relates to contextual structures and conditions in urban governance. By comparing two cases of social sustainability operationalization in Austrian and Swedish urban development projects based on...
journal article 2024
document
Anis, Summair (author), Sacco, Nicola (author), Saeednia, M. (author)
Climate change stresses the need for research and development of innovative sustainable mobility solutions that provide reliable and convenient door-to-door services for both passengers and freight. The increase in urban population and the popularity of e-commerce further highlights the need for action. In this regard, crowd-shipping is often...
journal article 2024
Searched for: subject%3A%22sustainably%22
(1 - 20 of 1,174)

Pages