Searched for: subject%3A%22temperature%22
(1 - 20 of 33)

Pages

document
Narayen, D. (author), VAN Berlo, E.M.C. (author), van Lier, J.B. (author), Spanjers, H. (author)
Simulated ammonium sulfate scrubber effluent was treated using bipolar membrane electrodialysis (BPMED) to recover sulfuric acid for reuse in the scrubber, and ammonium hydroxide as a product, without using any chemicals. The effect of pH and temperature of the feed solution on the energy consumption of the BPMED and the purity of the...
journal article 2024
document
Hu, X. (author), Huang, Jianlin (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Low-temperature sintering technology of Ag nanoparticles is widely used in high-power electronic device packaging. Utilizing simulation methods to comprehend and control the microstructure and properties of Ag sintering materials has emerged as a prominent research area. This work uses the General Form PDE module in COMSOL to simplify the...
conference paper 2024
document
Du, L. (author), Deng, Shanliang (author), Cui, Z. (author), Poelma, René H. (author), Beelen-Hendrikx, Caroline (author), Zhang, Kouchi (author)
In this study, we combined finite element method (FEM) based on Ansys and Noesis Optimus software to investigate the effect of bump structures and loading conditions on the electromigration properties of solder bumps in WLCSP. A numerical model considering current density, vacancy concentration, stress and temperature was utilized to calculate...
conference paper 2024
document
Liang, M. (author), Liu, C. (author), Liang, X. (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)
This paper investigates the influence of temperature on autogenous deformation and early-age stress (EAS) evolution in ordinary Portland cement paste using a recently developed Mini Temperature Stress Testing Machine (Mini-TSTM) and Mini Autogenous Deformation Testing Machine (Mini-ADTM). In the Mini-TSTM/ ADTM, CEM I 42.5 N paste with a...
journal article 2023
document
Weller, Lee (author), Shah, Priyav (author), Giles, Anthony (author), De Domenico, F. (author), Morris, Steve (author), Williams, Benjamin A.O. (author), Hochgreb, Simone (author)
Laser-Induced Grating Spectroscopy (LIGS) was applied in a high-pressure combustion facility. Instantaneous (sub-μs), spatially resolved (within 5 mm) measurements of temperature and molar fractions of water were obtained using thermal and electrostrictive LIGS signals. Temperatures up to 1800 K and water molar fractions between 0.01 and 0.12...
conference paper 2023
document
Jamaer, S. (author), Allaerts, D.J.N. (author), Meyers, J. (author), Van Lipzig, N. P.M. (author)
Vertical temperature profiles influence the wind power generation of large offshore wind farms through stability-dependent effects such as blockage and gravity waves. However, numerical tools that are used to model these effects are often computationally too expensive to cover the large variety of atmospheric states occurring over time....
journal article 2023
document
Yao, Liaojun (author), Chuai, Mingyue (author), Liu, J. (author), Guo, Licheng (author), Chen, Xiangming (author), Alderliesten, R.C. (author), Beyens, M. (author)
This study provides an investigation on mode I fatigue delamination growth (FDG) with fibre bridging at different R-ratios and temperatures in carbon-fibre reinforced polymer composites. FDG experiments were first conducted at different temperatures of R-ratios 0.1 and 0.5 via unidirectional double cantilever beam (DCB) specimens. A fatigue...
journal article 2023
document
Masoumian, S. (author), Maes, Roel (author), Wang, Rui (author), Yerriswamy, Karthik Keni (author), Schrijen, Geert-Jan (author), Hamdioui, S. (author), Taouil, M. (author)
SRAM Physical Unclonable Functions (PUFs) are one of the popular forms of PUFs that can be used to generate unique identifiers and randomness for security purposes. Hence, their resilience to attacks is crucial. The probability of attacks increases when the SRAM PUF start-up values follow a predictable pattern which we refer to as bias. In this...
conference paper 2023
document
Volakos, Efstratios (author), Davis, Chris (author), Teich, Martien (author), Lenk, Peter (author), Overend, M. (author)
Embedded load-bearing laminated glass connections have gained popularity in recent years due to their mechanical performance and aesthetic appeal. However, there is a paucity of data on their structural behaviour across a range of temperatures that may arise in building applications and there is also no simplified mechanics-based model for...
journal article 2023
document
Páez Watson, T.W. (author), van Loosdrecht, Mark C.M. (author), Wahl, S.A. (author)
The understanding of microbial communities and the biological regulation of its members is crucial for implementation of novel technologies using microbial ecology. One poorly understood metabolic principle of microbial communities is resource allocation and biosynthesis. Resource allocation theory in polyphosphate accumulating organisms ...
journal article 2023
document
Kouba, V. (author), Bachmannová, Ch (author), Podzimek, T. (author), Lipovová, P. (author), van Loosdrecht, Mark C.M. (author)
The adaptation of bacteria involved in the anaerobic ammonium oxidation (anammox) to low temperatures in the mainstream of WWTP will unlock substantial treatment savings. However, their adaptation mechanisms have begun to be revealed only very recently. This study reviewed the state-of-the-art knowledge on these mechanisms from -omics studies...
review 2022
document
Masulli, Marco (author), Liu, Z. (author), Guo, Feng Zhi (author), Li, Xue (author), Sudhölter, Ernst J. R. (author), Kumar, N. (author)
Chemical loss such as surfactants and alkalis by adsorption to reservoir rock surface is an important issue in enhanced oil recovery (EOR). Here, we investigated the adsorption behaviors of anionic surfactants and alkalis on silica for the first time as a function of temperature using quartz crystal microbalance with dissipation (QCM-D). The...
journal article 2022
document
Li, Ji (author), Hao, Xiaodi (author), Gan, Wei (author), van Loosdrecht, Mark C.M. (author), Wu, Yuanyuan (author)
Alginate like extracellular polymers (ALE) recovered from excess sludge have been evaluated as an eco-friendly, cost effective and sustainable alternative to highly valued materials. However, the ALE extraction from flocculent sludge ranges normally from 90 to 190 mg/g VSS, which is only equivalent to the lowest edge of the ALE production...
journal article 2022
document
Mohammadi, Fariborz (author), Maghsoodi, S. (author), Cheshomi, Akbar (author), Rajabi, Ali M. (author)
Unconfined compressive strength (S<sub>u</sub>) is one of the soil engineering parameters used in geotechnical designs. Due to the temperature changes caused by some human activities, it is important to study the changes in S<sub>u</sub> at different temperatures. On the other hand, due to the differences in the mineralogical composition of...
journal article 2022
document
Zhang, Z. (author), Peeters, J.W.R. (author), Popovich, V. (author), Ayas, C. (author)
Hydrogen plays a vital role in the utilisation of renewable energy, but ingress and diffusion of hydrogen in a gas turbine can induce hydrogen embrittlement on its metallic components. This paper aims to investigate the hydrogen transport in a non-hydride forming alloy such as Alloy 690 used in gas turbines inspired by service conditions of...
journal article 2022
document
Carer, Chloé (author), Driever, Leonhard Xaver (author), Köbben, Stein (author), McKenzie, Max (author), Rhenman, Fredrik (author), Van de Sype, Onno (author), van der Toorn, Jesse (author), van Wezel, Casper (author), Veiga, Constança Miranda de Andrade (author), Vinarskis, Aleksandrs (author), Jyoti, B.V.S. (author)
This research investigated how the variation of temperature and shear rate affects the viscosity of ethanol gel propellants that use methyl cellulose as gellant and, in parts, use boron as energetic additive. Using a rotational viscometer in a cone-and-plate configuration, propellant viscosity data was recorded across a range of temperatures...
journal article 2021
document
Fazzi, L. (author), Valvano, S. (author), Alaimo, Andrea (author), Groves, R.M. (author)
A simultaneous two-parameter single sensor based on weakly tilted Fibre Bragg Grating (TFBG), embedded in a 1 mm glass fibre/epoxy composite plate, is demonstrated to measure independently the temperature and strain variations induced in the material by the exposure to heating lamps. The spectrum of weakly TFBGs is composed of several peaks...
journal article 2021
document
Wei, P. (author), Uijttewaal, W.S.J. (author), van Lier, J.B. (author), de Kreuk, M.K. (author)
Accurate rheological characterisation of sewage waste activated sludge (WAS) is of high importance for downstream processing related to optimised sludge pumping and mixing, assessment of energy demands and overall process design. However, to elaborate rheological behaviour is often challenging under dynamic operational conditions in practice....
journal article 2021
document
Koutras, N. (author), Benedictus, R. (author), Villegas, I.F. (author)
The effect of temperature on the lap shear strength (LSS) and failure mechanisms of ultrasonically welded carbon fibre reinforced polyphenylene sulphide (CF/PPS) joints was investigated, correlating the weld performance to the crystallinity degree of PPS at the weldline. The single-lap shear tests were carried out at temperatures ranging from...
journal article 2021
document
Hendrickx, G.G. (author), Herman, P.M.J. (author), Dijkstra, Jasper T. (author), Storlazzi, Curt D. (author), Toth, Lauren T. (author)
The increasing pressure on Earth's ecosystems due to climate change is becoming more and more evident and the impacts of climate change are especially visible on coral reefs. Understanding how climate change interacts with the physical environment of reefs to impact coral growth and reef development is critically important to predicting the...
journal article 2021
Searched for: subject%3A%22temperature%22
(1 - 20 of 33)

Pages