- document
-
Mohammed, Musaab A. A. (author), Mohamed, Ahmed (author), Szabó, Norbert P. (author), Alarifi, Saad S. (author), Abdelrady, Ahmed (author), Alao, Joseph Omeiza (author)The recent research aims to investigate the petrophysical and hydrogeological parameters of the Nubian aquifer system (NAS) in Northern Khartoum State, Sudan, using integrated geophysical methods, including surface electrical resistivity and geophysical well-logging. The Nubian aquifer is a transboundary regional aquifer that covers vast areas...journal article 2024
- document
-
Zhang, P. (author), He, C. (author), Shen, C. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)Wheel-rail high-frequency interaction is closely related to the formation of railway short-wave defects. Finite element (FE) method has been widely used to simulate wheel-rail dynamic systems, but its validity in modelling high-frequency interaction has not been fully demonstrated in three dimensions (3D). This work aims at comprehensively...journal article 2024
- document
-
Vescovini, A. (author), Li, Carina Xiaochen (author), Paz Mendez, J. (author), Jin, Bo Cheng (author), Manes, Andrea (author), Bisagni, C. (author)This paper presents the work on six single-stringer specimens manufactured using the card-sliding technique with non-crimp fabrics and adopting a Double-Double (DD) stacking sequence. These specimens, representative of sub-structure level components, are used to investigate post-buckling and failure in aerospace structures. Two specimens...journal article 2024
- document
-
Xie, J. (author), Xu, Y. (author), Meng, Z. (author), Liang, M. (author), Wan, Z. (author), Šavija, B. (author)Auxetic cementitious cellular composites (ACCCs) exhibit desirable mechanical properties (e.g., high fracture resistance and energy dissipation), due to their unique deformation characteristics. In this study, a new type of cementitious auxetic material, referred to as peanut shaped ACCC, has been designed and subsequently architected using...journal article 2024
- document
-
Tott-Buswell, Jacques (author), Prendergast, Luke J. (author), Gavin, Kenneth (author)Monopiles are the most common Offshore Wind Turbine (OWT) foundations due to their simplicity in design, fabrication, and installation. However, large new-generation turbines have led to significant changes in monopile dimensions, necessitating extensive finite element analyses and ground investigations to meet design requirements. While Cone...journal article 2024
- document
-
Ujjaini Kempaiah, K. (author), Piovesan, Tommaso (author), Zachos, Pavlos K. (author), Michaelis, Dirk (author), Gebbink, Roy (author), van Rooijen, Bart (author), Prieto, Daniel Gil (author), MacManus, David (author), Sciacchitano, A. (author), Sheaf, Christopher (author)Unsteady inlet flow distortion can influence the stability and performance of any propulsion system, in particular for more novel, short and slim intakes of future aero-engine configurations. As such, the requirement for measurement methods able to provide high spatial resolution data is important to aid the understanding of these flow fields...journal article 2024
- document
-
Jumelet, Daan (author), van Gent, M.R.A. (author), Hofland, Bas (author), Kuiper, C. (author)Physical model tests have been performed to study static stability of rock-armoured mild slopes. Current stability design formulae for steeper rock-armoured slopes focus on plunging and surging waves. Slopes of 1:6 and milder usually have more spilling breakers which decreases the load. Also, on mild slopes displaced rocks more often remain...journal article 2024
- document
-
Li, Chunjie (author), Xu, Chengcheng (author), Chen, Y. (author), Li, Zhibin (author)To increase the efficiency and safety of expressway, this paper constructed a new intelligent connected cooperative vehicle infrastructure system and its effectiveness was verifid from both data and practical applications. Firstly, considering the convenience of using intelligent networking systems for public transportation, a new intelligent...journal article 2024
- document
-
Hammer, T.C. (author), Puolakka, Otto (author), Hendrikse, H. (author)A modeling approach to simulate ice-induced vibrations of vertically sided offshore structures in ice tank experiments is presented. The technique combines replica modeling with the preservation of kinematics during ice-structure interaction. The technique was chosen based on the theoretical understanding that ice-induced vibrations are...journal article 2024
- document
-
Broomandi, Parya (author), Galán-Madruga, David (author), Satyanaga, Alfrendo (author), Hamidi, Mehdi (author), Ledari, Dorna Gholamzade (author), Fathian, Aram (author), Sarvestan, Rasoul (author), Janatian Ghadikolaei, N. (author), Jahanbakhshi, Ali (author)The Middle East frontal sand and dust storms (SDS) occur in non-summer seasons, and represent an important phenomenon of this region’s climate. Among the mentioned type, spring SDS are the most common. Trend analysis was used in the current study to investigate the spatial-temporal variability of springtime dust events in the Middle East...journal article 2024
- document
-
Nijboer, Michiel (author), Jan, A. (author), Chen, M. (author), Batenburg, Kevin (author), Peper, Julia (author), Aarnink, Tom (author), Roozeboom, Fred (author), Kovalgin, Alexey (author), Nijmeijer, Arian (author), Luiten-Olieman, Mieke (author)Atomic layer deposition (ALD) is known for its unparalleled control over layer thickness and 3D conformality and could be the future technique of choice to tailor the pore size of ceramic nanofiltration membranes. However, a major challenge in tuning and functionalizing a multichannel ceramic membrane is posed by its large internal pore...journal article 2024
- document
-
Martin, H.A. (author), Smits, Edsger C.P. (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)This article introduces an online condition monitoring strategy that utilizes a transient heat pulse to detect package thermal performance degradation. The metric employed is the temperature-dependent transient thermal impedance "Zth(t, Tamb)."The proposed methodology offers quantitative insights into package thermal performance degradation...journal article 2024
- document
-
Feng, W. (author), Moreira Arouche, M. (author), Pavlovic, M. (author)In this paper, mode II fatigue crack growth properties of the composite-to-steel interface are characterised through different test configurations, namely ENF and 4ENF tests. Different loading types including force control and displacement control methods are compared. An innovative shear strain based method is proposed for monitoring the...journal article 2024
- document
-
Nativio, A. (author), Jovanovic, O. (author), van der Hoek, J.P. (author), Kapelan, Z. (author)The concept of circular economy, aiming at increasing the sustainability of products and services in the water and other sectors, is gaining momentum worldwide. Driven by this concept, novel bio-composite materials produced by recovering resources from different parts of the water cycle are now manufactured in The Netherlands. The new materials...journal article 2024
- document
-
Hu, D. (author), Du, L. (author), Alfreider, Markus (author), Fan, J. (author), Kiener, Daniel (author), Zhang, Kouchi (author)To fulfill the high-temperature application requirement of high-power electronics packaging, Cu nanoparticle sintering technology, with benefits in low-temperature processing and high-melting point, has attracted considerable attention as a promising candidate for the die-attach interconnect. Comprehensive mechanical characterization of the...journal article 2024
- document
-
Copetti, T. S. (author), Fieback, M. (author), Gemmeke, T. (author), Hamdioui, S. (author), Poehls, L. M.Bolzani (author)Memristive devices have become promising candidates to complement the CMOS technology, due to their CMOS manufacturing process compatibility, zero standby power consumption, high scalability, as well as their capability to implement high-density memories and new computing paradigms. Despite these advantages, memristive devices are susceptible...journal article 2024
- document
-
Khatami, Ali (author), Zaidman, A.E. (author)To ensure the quality of software systems, software engineers can make use of a variety of quality assurance approaches, for example, software testing, modern code review, automated static analysis, and build automation. Each of these quality assurance practices have been studied in depth in isolation, but there is a clear knowledge gap when...journal article 2024
- document
-
Leciñana, I. (author), Renart, J. (author), Carreras, L. (author), Turon, A. (author), Zurbitu, J. (author), Tijs, B.H.A.H. (author)The main objective of this paper is to present a delamination benchmark test concept for composite materials that develop non-self-similar delamination in characterization specimens. The non-self-similar delamination is induced by rotating the loading blocks. The simplicity of the test allows for analyzing the loading mode history by...journal article 2024
- document
-
Amoroso, Pedro (author), van Ostayen, R.A.J. (author), de Rooij, Matthijn B. (author)The rolling-sliding dynamics of large-scale cam-roller contacts are strongly influenced by the inertia of the roller, particularly when slippage occurs. Slippage can potentially impact the reliability of these rolling interfaces. This study introduces an approach to replicate the rolling-sliding dynamics of cam-roller contacts in a large-scale...journal article 2024
- document
-
Rusi, Sergio (author), Di Curzio, Diego (author), Di Giovanni, Alessia (author)The Gran Sasso carbonate aquifer is the largest and most productive in the Apennines. Its hydrogeological structure has been studied since the middle of the last century for the springs’ characterization for drinking purposes and for a motorway tunnel. Meanwhile, its hydrodynamic parametrization is less developed and has been limited to...journal article 2024