- document
- CHEN, YUYUAN (author) master thesis 2023
- document
-
Selvakumar, Ravishankaran (author)A multi-material structure combines diverse materials, allowing for precise tailoring of properties in specific regions. The integration of dissimilar materials leads to superior performance compared to single-material components. Bimetallic structures, a subset of multi-material systems, offer site-specific performance owing to the contrasting...master thesis 2023
- document
-
Giesen, Stefan (author)Fatigue might be the governing limit state in marine structures mainly induced by the waves and wind. Therefore, using a lap joint for the shell plating to replicate the appearance of a riveted joint for a retro yacht is critical due to the limited fatigue resistance. For this joint type cracks initiated at the root, which should always be...master thesis 2023
- document
-
van Kleinwee, Dennis (author)Qualification of the mechanical properties of Wire Arc Additive Manufacturing (WAAM) products is an essential step for a successful introduction of this process in industry. To realise this, the relationship between processing conditions, the thermal history and the resulting mechanical properties needs to be established. Hardness is an easy-to...master thesis 2023
- document
-
Veenstra, Riemer (author)In this research, a thermal analysis of the wire and arc additive manufacturing process is presented based on the F.E. method. <br/><br/>An important quality of the F.E. model that is presented in this research is to describe the temperature field that is experienced by the deposited material in the wire and arc additive manufacturing process....master thesis 2023
- document
-
Cascella, Roberto (author)Welding is a widely used process in various industries for joining materials, but it can introduce several complexities that affect the mechanical properties of the welded components. In particular, the presence of pores within the welded material can have significant implications for fatigue resistance, residual stresses, and overall structural...master thesis 2023
- document
-
Verdoes, Floris (author)This design project marks the collaborative efforts of Translas, a prominent welding company based in the Netherlands, and Skelex, a scale-up enterprise specializing in exoskeleton design. Translas developed the 8XE fume extractor torch. However, a common complaint of the new torch is its decreased usability and potential ergonomic risk. To...master thesis 2023
- document
-
Koster, Jeroen (author)Aluminium alloy AA2024-T3 is a lightweight and damage tolerant material, and is therefore often used in aerospace applications. However, this alloy is difficult to weld using conventional fusion welding techniques due to defects caused by the meld pool.<br/> <br/>Friction stir welding (FSW) was developed by The Welding Institute (TWI) in 1991 in...master thesis 2023
- document
-
Tijs, B.H.A.H. (author)Thermoplastic composites enable new manufacturing techniques such as conduction welding to make the aviation industry more sustainable, while at the same time, provide great benefits to cost-efficient high-volume production. One of the benefits of welding is that it reduces the amount of mechanical fasteners required. Fastener-free joining also...doctoral thesis 2023
- document
-
van Boekel, Mark (author)High Manganese Austenitic Steel (HMnAS) is a novel steel exhibiting excellent mechanical properties at arctic temperatures. Defense Material Organisation (DMO) is interested in the feasibility of using HMnAS in their navy's ships alongside EH36 high-strength shipbuilding steel, using 307PF stainless steel weld filler metal.<br/>The feasibility...master thesis 2023
- document
-
Yan, R. (author)High-strength steel (HSS) has higher strength but lower ductility than mild steel. The cross-section of the structural members may be reduced using HSS instead of mild steel, provided the buckling of elements does not govern the failure. The reduced member size benefits the environment and economy by means of less energy consumption, less carbon...doctoral thesis 2023
- document
-
Yan, R. (author), Mela, Kristo (author), El Bamby, H. (author), Veljkovic, M. (author)The newest version of prEN 1993-1-8 (2022) prescribes a material factor (Cf) to reduce the design resistance of welded joints made of high strength steel (HSS) mostly due to the lack of available experiments, given the less ductility of HSS compared to mild steel. Additionally, it is stated that the material design yield strength should not...journal article 2023
- document
-
Yan, R. (author), Mela, Kristo (author), Yang, Fei (author), El Bamby, H. (author), Veljkovic, M. (author)A welded connection consists of three main material zones, the base material (BM), the heat-affect zone (HAZ), and the weld metal (WM). The strength of HAZ depends on the BM grade and manufacturing process, electrode grade, and welding parameters. Under certain conditions, HAZ has the lowest material strength, especially for high-strength...journal article 2023
- document
-
Faucon, L.E.K. (author), Boot, T. (author), Riemslag, A.C. (author), Scott, S.P. (author), Liu, Ping (author), Popovich, V. (author)In this work, the hydrogen fatigue of pipeline steel X60, its girth welds and weld defects were investigated through in situ fatigue testing. A novel in situ gaseous hydrogen charging fatigue set-up was developed, which involves a sample geometry that mimics a small-scale pipeline with high internal hydrogen gas pressure. The effect of hydrogen...journal article 2023
- document
-
Lescur, Amke (author), Stergar, Erich (author), Lim, Jun (author), Hertelé, Stijn (author), Petrov, R.H. (author)Austenitic stainless steels similar to type AISI 316L are widely used structural materials in current and future nuclear reactors. Careful development and characterization of these materials and their welds is needed to verify the structural integrity of large-scale multicomponent structures. Understanding the local deformation behavior in...journal article 2023
- document
-
Belo Gomes Brito, C. (author), Teuwen, Julie J.E. (author), Dransfeld, C.A. (author), Villegas, I.F. (author)This paper evaluates the potential of changing the welding force and the compliance of the energy director (ED) to reduce the effects caused by misaligned adherends, which were: increased through-thickness heating, reduced size of welded area and increased heating time. In the methodology that was followed, we welded adherends misaligned by...journal article 2023
- document
-
Sood, A. (author), Schimmel, Jim (author), Mattos Ferreira, V. (author), Bosman, Marko (author), Goulas, Constantinos (author), Popovich, V. (author), Hermans, M.J.M. (author)Invar alloys exhibit low thermal expansion and are useful in applications requiring dimensional stability when subject to temperature changes. Conventional production of Invar faces certain challenges that can be offset by exploiting additive manufacturing processes. This study employed pulsed gas tungsten arc welding (GTAW) to deposit Invar...journal article 2023
- document
-
Jongbloed, B.C.P. (author), Teuwen, Julie J.E. (author), Villegas, I.F. (author)Continuous ultrasonic welding is an attractive welding technique for thermoplastic composite structures. In this process, a metallic sonotrode connected to a piezoelectric transducer and to a press moves along the parts to be welded applying ultrasonic vibrations and a static welding force on the welding overlap. Thus far, the research carried...journal article 2023
- document
-
Ebrahimi, Amin (author), Hermans, M.J.M. (author)Laser butt welding of thin metal sheets is a widely used fusion-based joining technique in industrial manufacturing. A comprehensive understanding of the complex transport phenomena during the welding process is essential for achieving high-quality welds. In the present work, high-fidelity numerical simulations are employed to investigate the...journal article 2023
- document
-
Bai, Wei (author), Xu, X. (author), Liu, Yaolan (author), Liang, Yunxiao (author), Shen, Yijie (author), Han, Zhenyu (author), Sheng, Zhendong (author), Chen, Rong (author), Zhu, Minhao (author)Systematic experimental investigations were conducted to study the microstructures and impact toughness of each heat affected zone (HAZ) formed during rail flash-butt welding. A high-strength carbide-free bainitic rail steel was subjected to different thermal simulation cycles to separately reproduce each HAZ subzone by tailoring the peak...journal article 2023