Searched for: subject%3A%22wind%255C%252Btunnel%22
(1 - 20 of 44)

Pages

document
Broertjes, Thomas (author)
In response to the urgent need for renewable energy amidst the escalating impacts of global warming, this study delves into the forefront of wind energy research, particularly focusing on the innovative Multi-Rotor System (MRS). The MRS concept offers a promising departure from the prevailing trend of scaling up traditional turbines, instead...
master thesis 2024
document
Hinssen, Yara (author)
Aeroacoustic testing in wind tunnels is crucial for understanding and mitigating the noise generation mechanisms in several devices while maintaining satisfactory aerodynamic performance in the conceptual design stage. However, current measurements in closed-section wind tunnels face challenges in terms of installation, due to the effect of the...
master thesis 2024
document
Eftekhar, Shadab (author)
The Flying-V, a novel aircraft design developed at Delft University of Technology, presents a revolutionary flying wing transport aircraft with a remarkable 20% reduction in energy consumption compared to traditional twin-aisle planes. <br/>This thesis project delves into the study of optimizing the Flying-V's landing performance, emphasizing...
master thesis 2024
document
Marques Cavaleiro Machado Jorge, Antonio (author)
master thesis 2023
document
Tziaros, Filotas (author)
The need to reduce greenhouse gas emissions is emergent throughout every industrial sector worldwide. For aviation, this has opened a market gap for small scale electric aircraft configurations (e-V/STOL). These configurations are very diverse and they are classified based on how lift is obtained. However, their flight...
master thesis 2023
document
Bogaerts, Charlie (author)
This study aims to quantify the aerodynamic behaviour of fixed pitch rotors with a diameter of 12.7 cm in axial descent, and its contribution to the attitude oscillations found for quadcopters under similar flight conditions. Wind tunnel tests are performed with an isolated rotor, as well as a complete quadcopter mounted inside a gimbal that...
master thesis 2023
document
Iyer, Sowmya (author)
The thesis presents an analysis of unsteady vortex shedding and vortex induced vibrations (VIV) on wind turbine blades using a combination of Stereoscopic Particle Image Velocimetry (SPIV) and Computational Fluid Dynamics (CFD). A spanwise uniform blade with a symmetric NACA0021 airfoil section, 0.075 m chord, and 0.4 m span was tested...
master thesis 2023
document
Janoff, Philipp (author)
Leading edge roughness is an important challenge for the wind energy industry as blades are permanently exposed to the damaging impacts of the environment. The contamination due to impact of insects, ice accretion and dust; as well as the erosion of the blade due to rain, debris and abrasive airborne particles increase roughness upon the surface...
master thesis 2023
document
van Kan, Ferran (author)
A study is conducted on the effects of tip-mounted rotors on a conventional Darrieus H-VAWT; this study is complementary to the X-rotor concept proposal. This proposal features a novel offshore wind turbine concept that utilises blade-mounted tip rotors to extract energy from the flow. Following a literature study phase, an experimental campaign...
master thesis 2023
document
Rong, Richard (author)
In recent years, there has been renewed interest in propeller research due to environmental concerns. Propellers are known for their low-speed efficiency and compatibility with electric motors. The utilization of regenerative energy during deceleration has been demonstrated to be beneficial for automobiles and has the potential to be applied to...
master thesis 2023
document
Knepper, Jorian (author)
The aerodynamic behaviour of a pitched baseball depends on the combination of the translational velocity, the rotational velocity in combination with the rotation axis and the seam positions. For small spin parameters the effect of seam positions dominates the Magnus effect. This study focusses on a visual understanding of the seam position by...
master thesis 2022
document
van Neerbos, Tom (author)
The main objective of this master’s thesis is to experimentally investigate the effects of dynamic inflow conditions on the wake of an actuator disc. Dynamic inflow is the unsteady wake in momentum theory. Dynamic inflow can experimentally be generated by a gust generator. During the experiments, in which Particle Image Velocimetry (PIV) was...
master thesis 2022
document
Vergés i Plaza, Guillem (author)
Trailing-edge noise can be the dominant noise source of diverse industrial applications, including wind turbines. Noise regulations may limit the power production and installation of new wind farms. There is a need to reduce it. In order to achieve so, we first need to predict it, and to do so we need experimental data to support and validate...
master thesis 2022
document
Rasch, Tycho (author)
Wind loads acting on STS cranes are an important design parameter to be taken into account when designing STS cranes. Current calculation standards such as the EN13001-2 overestimate wind forces. The goal of this research is to propose an improvement on current calculation standards. Wind tunnel tests were performed to assess the results of...
master thesis 2022
document
Nolet, Stijn (author)
This thesis is performed with the aim to investigate whether split flaps can be a feasible solution for increasing the Flying V directional control power. In order to do so, a set of wind tunnel experiments have been concluded with a 4.6% half wing model in the Open-Jet-Facility at the Delft University of Technology. Here, several split flap...
master thesis 2022
document
Costa Fernandez, José Luis (author)
The technical advancements achieved during the last decade have permitted the implementation of low-fidelity numerical methods to analyze simplified aeroelastic problems. However, the available computational power is still incapable of dealing with more realistic events involving complex structural dynamics and flow regimes. For this reason,...
master thesis 2022
document
Mathijssen, Lucas (author)
Supersonic panel flutter is a self-excited vibration, where energy is transferred into thin flexible panels, such as skin panels in supersonic vehicles, from the (supersonic) flow around them, which can lead to their rapid fatigue failure. Relevant examples of this include the failure of skin panels in the X-15 vehicle, or violent oscillations...
master thesis 2022
document
Schildkamp, Roderick (author)
With the increased focus on sustainability, aircraft are designed to reduce their emissions. One way to accomplish this is by increasing the wing aspect ratio, thereby increasing the aerodynamic efficiency, however this is not without consequences. Increased aspect ratio wings have a higher structural mass, are more susceptible to gust and...
master thesis 2022
document
Ruland, Oscar (author)
Recent trends in aviation highlight the ever-increasing need for fuel economy and sustainability. Active morphing technology can offer significant benefits over conventional wing designs. Inspired by nature, smart morphing technologies enable the aircraft of tomorrow to sense their environment and adapt the shape of their wings in-flight to...
master thesis 2021
document
van Hulst, Jeffrey (author)
One of the basic principles of the design of structures is that they must be sufficiently safe and meet the required reliability requirements. In Eurocode NEN-EN 1990 specific minimum reliability index values are defined, which depend on a certain reference period and reliability class. To ensure that the structures meet the reliability...
master thesis 2021
Searched for: subject%3A%22wind%255C%252Btunnel%22
(1 - 20 of 44)

Pages