Collection: education
(1 - 20 of 505)

Pages

document
Gribnau, Koen (author), Hemel, Mart-Jan (author), Koevoets, Igor (author), Onrust, Menno (author)
student report 2019
document
Dijsselbloem, Stijn (author), van Adrichem, Wouter (author), Baas, Daniël (author), Bartczak, Konrad (author), Zeeuw van der Laan, chris (author)
According to themselves, Argentinians are living with their backs towards the sea. In order to turn this around, a feasability study has been done to find out how a network of marinas along the coast of the province would look like, based on a MCDA including all urban areas along the coast and a fleet analysis. A final network has been proposed...
student report 2019
document
Nair, Revathy (author)
This study is part of a project titled: “Phenolic compounds degradation in AnMBR under mesophilic and thermophilic operation: BioXtreme-following up”.
Phenol is a toxic contaminant found widely in industrial effluents. It is toxic to humans and animals even at very low concentrations. Anaerobic digestion uses phenol as a carbon source and...
student report 2019
document
Savazzi, Alessandro (author)
The Meuse river basin covers an area of 33,000 km2, touches five countries and is a major communication route in Europe. It is one of the catchments with longest streamflow records, with daily measures of discharge dating back to the beginning of the previous century. Attempts to model streamflow with standard hydrological models revealed that...
student report 2019
document
YASAKU, Toshiya (author)
A methodology for an assessment of resiliency of a transportation system threatened by a disaster has been evaluated as to whether it is applicable in small coastal communities at risk of tsunamis. A case study was carried out in Otsuchi town in Japan. The result shows that, although the methodology is well-designed to apply in different cities...
student report 2019
document
van Oudheusden, Alma (author)
In this report, an overview of the most common recycling methods for composite materials is created. It describes the process and recyclate characteristics, as well as the (dis)advantages of each method and the environmental and technological development. To draw conclusions on the current feasibility of composite recycling, the gathered data is...
student report 2019
document
van Tol, Pepijn (author)
student report 2019
document
Roy, Mrinal (author)
Recently, the use of atomic layer deposition (ALD) technique for depositing thin films of metal oxides on membrane substrates has proved to be an effective way to fabricate commercially available UF or NF membranes to get tight UF/NF ceramic membranes. The main advantage of this technique is controlled deposition of a monolayer of metal oxides....
student report 2019
document
Sutter, V.B. (author)
In this additional thesis a 2D urban flood model in the downtown area of Shanghai was investigated. Therefore a numerical model of Delft3D flexible mesh (DFM) was used. Since the model was investigated from scratch, a lot of data analysis and pre-processing was required to have reasonable input data. As input data a surface elevation map, a map...
student report 2019
document
Tantawy, Iman (author)
Water use has increased with double the rate of population growth in the twentieth century. Combined with changing diets due to increased global economic wealth, almost 50 per cent more food needs to be produced to meet demand, implying that fresh water availability will face even greater stress. At the same time, climate change is predicted to...
student report 2019
document
Schmidt-Ott, Fabian (author)
In the present research, the activation parameterization method introduced by Nenes and Seinfeld (2003) was compared and evaluated to a remote sensing-based method by Rusli, Donovan & Russchenberg (2017) for determining the cloud drop number concentration. Both methods have fundamentally different approaches for indirectly determining the...
student report 2019
document
Bottemanne, Job (author), van Gils, Martijn (author), Taks, Thomas (author), Martens, Roland (author), Teeling, Jelle (author)
The port authority of the Port of Talcahuano has the desire to expand the port. The goal of the expansion is to increase the berth space and attract more vessels, thus increasing their throughput. This report is an advise to the port authority on the possibilities of expanding. Four preliminary port designs aremadewith the requirement of the...
student report 2019
document
Elpenhof, Chris (author)
In the mining industry, sampling is an essential feature for the characterization of the material when all available material cannot be examined and only a small fraction of the total is evaluated. This study addresses how the minimum number of samples required to obtain a statistically accurate answer. This is important since less sample...
student report 2019
document
Gao, Ge (author)
This paper analysis the effects of soil moisture and vegetation water content (VWC) on total backscattering (σ_tot^0) simulated by water cloud model (WCM) throughout a growth cycle of maize at different frequencies, polarization modes, and incidence angles. Firstly, the bare soil backscatter (σ_soil^0) was simulated by Integral Equation Method ...
student report 2019
document
Izeboud, Maaike (author)
As of yet, there is no consensus on the role of the cloud radiative effect (CRE) on the Greenland Ice Sheet (GrIS). This study focuses on the seasonal and temporal variability of the CRE, to better understand the response of the firn. To do so, we combine satellite observations, climate-model output, and a snow model. We separate short-term and...
student report 2019
document
Xu, Jie (author)
Shell is a popular form of structures as it can withstand relative large load with small thickness, which satisfies the aesthetic preference. Due to the curvatures of shell structures, shell can carry the distributed load as membrane forces instead of bending moments. Due to the small thickness, shell structures are highly sensitive to...
student report 2018
document
Seeram Apoorva, Apoorva (author)
The presence of Arsenic in the groundwater, and eventually in the drinking water is a serious problem in many of the Asian countries. Due to it high toxicity to its removal is very essential. There are many removal technologies for the removal of arsenic such as adsorption, coagulation-filtration, membrane filtration, ion exchange and...
student report 2018
document
van Utenhove, Erik (author), van Welsenes, Thomas (author), van Wijland, Bas (author), Memelink, Joris (author), de Klerk, Reinoud (author)
For the past years large quantities of plastic waste have been accumulating on the beaches in Southwest Bali. This has economical, environmental and health implications in this area. This event mainly occurs between December to March. The objective of this report is to map the plastic waste problem in Southwest Bali and look for efficient...
student report 2018
document
Verbeek, Bram (author), Helmer, Joyce (author), Binsma, Jouke (author), Onnink, Casper (author)
Storm safety and durability of touristic destinations is of utmost importance in Cuba, considering high stakes regarding life and capital invested in the development of the touristic sector. This twomonth research focuses on one of the largest Caribbean beach tourism hotspots found in Varadero, Cuba.

Tourism along the Hicacos peninsula...
student report 2018
document
Dijkstra, Fokke (author), Jordans, Luuk (author), Groenewegen, Maurits (author), Steijlen, Florentine (author), Mekel, Charlotte (author)
Terminos Lagoon is the biggest and ecologically most important fluvial-lagoon system of the southern Gulf of Mexico. Rivers, sea and meteorology all influence the lagoon, variable over the year, resulting in a complex situation. To protect this area, it is crucial to know how different hydrological processes, hydrodynamic processes and spatial...
student report 2018
Collection: education
(1 - 20 of 505)

Pages