(1 - 20 of 159)

Pages

document
Van der Meer, Jochem (author)
Combustion is and remains for the foreseeable future an essential chemical process. The physical and mathematical modelling of such processes can help to optimise the design and operation of combustion furnaces which is critical for fuel efficiency. Given the combined complexity and interaction of the gas flow dynamics and the reaction processes...
bachelor thesis 2023
document
Van der Meer, Stan (author)
A strategy and concept design for charging LEFVs in city logistics. Tiler Cargo is a wireless charger for electric cargobikes: Parking equals charging. Bulk charging batteries in the commercial domain result in chaotic situations with dozens of adapters and requires human responsibility to thoroughly perform charging procedures, resulting in...
master thesis 2021
document
Knoop, V.L. (author), Wang, M. (author), Wilmink, Isabel (author), Hoedemaeker, D. Marika (author), Maaskant, Mark (author), Van der Meer, Evert-Jeen (author)
An increasing amount of vehicles are equipped with driver assistance systems; many of the vehicles currently on the market can be optionally equipped with adaptive cruise control and lane centering systems. Using both systems at the same time brings the vehicle to SAE level-2 automation . This means a driver does not need to perform longitudinal...
journal article 2019
document
Quiros Solano, W.F. (author), Gaio, N. (author), Stassen, O.M.J.A. (author), Arik, Y.B. (author), Silvestri, C. (author), Van Engeland, N.C.A. (author), Van der Meer, A. (author), Passier, R. (author), Sahlgren, C.M. (author), Bouten, C.V.C. (author), van den Berg, A. (author), Dekker, R. (author), Sarro, Pasqualina M (author)
We present a novel and highly reproducible process to fabricate transferable porous PDMS membranes for PDMS-based Organs-on-Chips (OOCs) using microelectromechanical systems (MEMS) fabrication technologies. Porous PDMS membranes with pore sizes down to 2.0 μm in diameter and a wide porosity range (2–65%) can be fabricated. To overcome issues...
journal article 2018
document
Enschedé, M. (author), Van Looij, Z. (author), Van der Meer, R. (author), Van Oorschot, H. (author), Oudshoorn, R. (author), Stevens, T. (author)
In the southern part of Vietnam, where the lower Mekong Delta is located, coastal erosion problems occur. In the Bạc Liêu province, one of the twelve provinces in the Mekong Delta, the width of the mangrove belt between the sea dyke and the sea is reduced by 100 m in the last four years. By rehabilitation of the mangrove forest, the hinterland...
student report 2017
document
Van der Meer, D.W. (author)
Arguably the most important challenge of our time is climate change. In The Netherlands in 2014, 30% and 21.5% of total CO2 emissions were emitted by the electricity producing and transportation sector, respectively. Electric vehicles (EVs) have therefore gained interest as they do not emit carbon dioxide whilst driving and therefore do not...
master thesis 2016
document
Van der Meer, L. (author)
The majority of Cutter Suction Dredge (CSD) vessels (Figure 1) is equipped with rubber isolators for Operator Cabin (OC) vibration reduction. A small number of vessels is equipped with expensive gas springs. Of the vessels that have been equipped with rubber isolators, a number is experiencing large vibrations caused by what is assumed resonance...
master thesis 2016
document
Liu, G. (author), Ling, F.Q. (author), Van der Mark, E.J. (author), Zhang, X.D. (author), Knezev, A. (author), Verberk, J.Q.J.C. (author), Van der Meer, W.G.J. (author), Medema, G.J. (author), Liu, W.T. (author), Van Dijk, J.C. (author)
This study assessed the characteristics of and changes in the suspended particles and the associated bacteria in an unchlorinated drinking water distribution system and its reservoirs with different water sources. The results show that particle-associated bacteria (PAB) were present at a level of 0.8–4.5?×?103 cells ml?1 with a biological...
journal article 2016
document
Latifi, M. (author), Van der Meer, F.P. (author), Sluys, L.J. (author)
This paper presents a new damage model for simulating fatigue-driven delamination in composite laminates. This model is developed based on the Thick Level Set approach (TLS) and provides a favorable link between damage mechanics and fracture mechanics through the non-local evaluation of the energy release rate. Previously, this approach has been...
conference paper 2015
document
Salauddin, M. (author), Broere, A. (author), Van der Meer, J.W. (author), Verhagen, H.J. (author), Bijl, E. (author)
A new and symmetrical single layer armour unit, the crablock, has been designed in the UAE. One breakwater was reconstructed with crablock, but very limited testing had been performed. Just to become more acquainted with this new unit, pre-competitive research at a university has been performed, which is the subject of this paper. Being a new...
conference paper 2015
document
Van der Meer, A.W. (author)
In the dimensional averaged numerical models, that are used for practicle purposes, there need to be accounted for three-dimensional processes. Amongst others a bank shear stress parameterization need to be incorperated. This master thesis focusses on the outer-bank shear stress in order to obtain a parameterization for the outer-bank shear...
master thesis 2015
document
Pot, R. (author), Roelse, F.P. (author), Van der Meer, M.T. (author), Nushi, B.R.I. (author), Nelemans, J.P. (author)
The application of the Observational Method can contribute to an economic construction process and effective geotechnical risk management. Current project management practices and control of construction works lead to unfavourable conditions of its application. Throughout the realization of infrastructure, understanding of project risks and...
conference paper 2015
document
Pot, R. (author), Roelse, F.P. (author), Van der Meer, M.T. (author), Nushi, B.R.I. (author), Nelemans, J.P. (author)
The application of the Observational Method can contribute to an economic construction process and effective geotechnical risk management. Current project management practices and control of construction works lead to unfavourable conditions of its application. Throughout the realization of infrastructure, understanding of project risks and...
conference paper 2015
document
Post, D. (author), Van der Meer, J.D. (author), Hammer, M.H.M. (author)
Start-ups and Smaller and Medium sized Enterprises are vital for national economies. The vast majority of these enterprises can be found in services industries. One of the parameters to measure performance of a company is growth. Only a very small percentage of these enterprises find ways to sustainable growth. Little is known on models for...
journal article 2015
document
Van der Meer, T.E. (author)
Concrete bridges are subjected to large lateral deformations, which if restrained will also lead to large (axial) stresses in the structure. If unrestrained these deformations caused by temperature variation and shrinkage, can become problematic for bridges of sufficient continuous length. If deformation is restrained to some degree, then the...
master thesis 2015
document
Rocha, I.B.C.M. (author), Raijmaekers, S. (author), Nijssen, R.P.L. (author), Van der Meer, F.P. (author)
In this work, a glass/epoxy material system commonly applied in wind turbine design was used to evaluate damage processes brought by water ingression during service life. Composite short-beams and neat epoxy beams and dog-bones were conditioned by water immersion at 50º until saturation and tested both statically and in fatigue. By comparing...
conference paper 2015
document
Lahuerta, F. (author), Nijssen, R.P.L. (author), Van der Meer, F.P. (author), Sluys, L.J. (author)
Thick laminates are increasingly present in large composites structures such as wind turbine blades. Different factors are suspected to be involved in the decreased static and dynamic performance of thick laminates. These include the effect of self-heating, the scaling effect, and the manufacturing process influence. The aim of this work is to...
conference paper 2015
document
Trung, L.H. (author), Van der Meer, J.W. (author), Verhagen, H.J. (author)
Little is known about the strength of the land-side slopes of the Vietnamese sea dikes under overtopping attack. Some grass-covered slopes were tested by a wave overtopping simulator. The paper describes the simulator and presents the test results. The tested grass covers could withstand overtopping rates varying from 20 l/s to 100 l/s per meter...
journal article 2014
document
Borges Freitas, S.C. (author), Van Halem, D. (author), Van der Meer, W.G.J. (author), Rietveld, L.C. (author)
conference paper 2014
document
Borges Freitas, S.C. (author), Van Halem, D. (author), Badruzzaman, A.B.M. (author), Van der Meer, W.G.J. (author)
Pre-oxidation of As(III) is necessary in arsenic removal processes in order to increase its efficiency. Therefore, the Fenton Redox Chemistry is defined by catalytic activation of H2O2 and currently common used for its redox oxidative properties. In this study the effect of H2O2 production catalysed by O2 in metallic surfaces (MS), such as...
conference paper 2014
(1 - 20 of 159)

Pages