Recently, one critical issue looms large in the field of recommender systems - there are no effective benchmarks for rigorous evaluation - which consequently leads to unreproducible evaluation and unfair comparison. We, therefore, conduct studies from the perspectives of practical theory and experiments, aiming at benchmarking recommendation for rigorous evaluation. Regarding the theoretical study, a series of hyper-factors affecting recommendation performance throughout the whole evaluation chain are systematically summarized and analyzed via an exhaustive review on 141 papers published at eight top-tier conferences within 2017-2020. We then classify them into model-independent and model-dependent hyper-factors, and different modes of rigorous evaluation are defined and discussed in-depth accordingly. For the experimental study, we release DaisyRec 2.0 library by integrating these hyper-factors to perform rigorous evaluation, whereby a holistic empirical study is conducted to unveil the impacts of different hyper-factors on recommendation performance. Supported by the theoretical and experimental studies, we finally create benchmarks for rigorous evaluation by proposing standardized procedures and providing performance of ten state-of-the-arts across six evaluation metrics on six datasets as a reference for later study. Overall, our work sheds light on the issues in recommendation evaluation, provides potential solutions for rigorous evaluation, and lays foundation for further investigation.

We propose a manager-worker framework (the implementation of our model is publically available at: https://github.com/zcaicaros/manager-worker-mtsptwr) based on deep reinforcement learning to tackle a hard yet nontrivial variant of Travelling Salesman Problem (TSP), i.e. multiple-vehicle TSP with time window and rejections (mTSPTWR), where customers who cannot be served before the deadline are subject to rejections. Particularly, in the proposed framework, a manager agent learns to divide mTSPTWR into sub-routing tasks by assigning customers to each vehicle via a Graph Isomorphism Network (GIN) based policy network. A worker agent learns to solve sub-routing tasks by minimizing the cost in terms of both tour length and rejection rate for each vehicle, the maximum of which is then fed back to the manager agent to learn better assignments. Experimental results demonstrate that the proposed framework outperforms strong baselines in terms of higher solution quality and shorter computation time. More importantly, the trained agents also achieve competitive performance for solving unseen larger instances.

Bisphenols are important industrial materials for example for the production of plastics, but are also well known for their adverse health effects, in particular bisphenol A (BPA) is an endocrine disruptor. The widespread use of plastics has raised concerns. Therefore, the removal of bisphenols from wastewater has sparked the interest of the scientific community. This work introduces a novel hybrid technique of micro-nano bubbles assisted laccase (MNB-Lac) to degrade bisphenols in water. The feasibility of MNB-Lac using BPA as a model contaminant was evaluated by comparing with MNB, Lac, ultrasound (UL), UL-Lac, and UL-MNB-Lac. Comprehensive investigations were carried out to understand the specific influences of key process parameters including the initial pollutant concentration, temperature, air intake, pH, outlet pipe length, and Lac concentration on BPA degradation. The alkaline environment and extended length of outlet pipe could improve the degradation efficiency further. MNB-Lac exhibited 2.3–6.2 folds higher BPA degradation and less time than the other above process under the optimal parameters. The mechanism of MNB-Lac revealed that the generation of hydroxyl radical, high O₂ solubility, and high mass transfer efficiency induced by MNB play important roles on enhancing the degradation catalyzed by Lac. MNB-Lac was successfully used for treating bisphenol B, bisphenol C, and the mixture of three bisphenols with high removal efficiency. Subsequently, these degradation products were analyzed by GC–MS. MNB-Lac potentially represents an innovative technology with considerable advantages in contaminant cleanup and time efficiency for treating phenolic contaminated water. Furthermore, the findings provide new insights into the enhancement of the performance of an oxidizing enzyme by introducing MNB technology.

Lignin valorization may offer a sustainable approach to achieve a chemical industry that is not completely dependent on fossil resources for the production of aromatics. However, lignin is a recalcitrant, heterogeneous, and complex polymeric compound for which only very few catalysts can act in a predictable and reproducible manner. Laccase is one of those catalysts and has often been referred to as an ideal “green” catalyst, as it is able to oxidize various linkages within lignin to release aromatic products, with the use of molecular oxygen and formation of water as the only side product. The extent and rate of laccase-catalyzed lignin conversion were measured using the label-free analytical technique isothermal titration calorimetry (ITC). IITC provides the molar enthalpy of the reaction, which reflects the extent of conversion and the time-dependent power trace, which reflects the rate of the reaction. Calorimetric assessment of the lignin conversion brought about by various fungal and bacterial laccases in the absence of mediators showed marked differences in the extent and rate of conversion for the different enzymes. Kraft lignin conversion by Trametes versicolor laccase followed Michaelis–Menten kinetics and was characterized by the following thermodynamic and kinetic parameters ΔH_ITC = −(2.06 ± 0.06)·10³ kJ mol⁻¹, K_M = 6.6 ± 1.2 μM and V_max = 0.30 ± 0.02 U/mg at 25°C and pH 6.5. We envision calorimetric techniques as important tools for the development of enzymatic lignin valorization strategies.

Hypericin is a naturally occurring compound synthesized by certain species of the genus Hypericum, with various pharmacological effects. It is used as a natural photosensitizing agent with great potential in photodynamic therapy. This review discusses the latest results about the biosynthetic pathways and chemical synthetic routes to obtain hypericin. Although many analysis methods can be used for the determination of hypericin purity, HPLC has become the method of choice due to its fast and sensitive analyses. The extraction and purification of hypericin are also described. Hypericin can be used as a photosensitizer due to a large and active π-electron conjugated system in its structure. Medical applications of hypericin are not easy due to several unsolved practical problems, which include hypericin phototoxicity, poor solubility in water, and extreme sensitivity to light, heat, and pH.

Multi-microphone speech enhancement methods typically require a reference position with respect to which the target signal is estimated. Often, this reference position is arbitrarily chosen as one of the reference microphones. However, it has been shown that the choice of the reference microphone can have a significant impact on the final noise reduction performance. In this paper, we therefore theoretically analyze the impact of selecting a reference on the noise reduction performance with near-end noise being taken into account. Following the generalized eigenvalue decomposition (GEVD) based optimal variable span filtering framework, we find that for any linear beamformer, the output signal-to-noise ratio (SNR) taking both the near-end and far-end noise into account is reference dependent. Only when the near-end noise is neglected, the output SNR of rank-1 beamformers does not depend on the reference position. However, in general for rank-r beamformers with r>1 (e.g., the multichannel Wiener filter) the performance does depend on the reference position. Based on these, we propose an optimal algorithm for microphone reference selection that maximizes the output SNR. In addition, we propose a lower-complexity algorithm that is still optimal for rank-1 beamformers, but sub-optimal for the general rank-r beamformers. Experiments using a simulated microphone array validate the effectiveness of both proposed methods and show that in terms of quality, several dB can be gained by selecting the proper reference microphone.

With tremendous amount of recommendation algorithms proposed every year, one critical issue has attracted a considerable amount of attention: there are no effective benchmarks for evaluation, which leads to two major concerns, i.e., unreproducible evaluation and unfair comparison. This paper aims to conduct rigorous (i.e., reproducible and fair) evaluation for implicit-feedback based top-N recommendation algorithms. We first systematically review 85 recommendation papers published at eight top-tier conferences (e.g., RecSys, SIGIR) to summarize important evaluation factors, e.g., data splitting and parameter tuning strategies, etc. Through a holistic empirical study, the impacts of different factors on recommendation performance are then analyzed in-depth. Following that, we create benchmarks with standardized procedures and provide the performance of seven well-tuned state-of-the-arts across six metrics on six widely-used datasets as a reference for later study. Additionally, we release a user-friendly Python toolkit, which differs from existing ones in addressing the broad scope of rigorous evaluation for recommendation. Overall, our work sheds light on the issues in recommendation evaluation and lays the foundation for further investigation. Our code and datasets are available at GitHub (https://github.com/AmazingDD/daisyRec).

Hypericin is considered to be the most biologically active substance in the crude extract of Hypericum perforatum L. (also known as St. John's wort) and has a wide range of pharmacological effects. In this study, a high resolution high performance liquid chromatography method for determining hypericin was established by comparing different chromatographic conditions. Xylanase-assisted extraction and microwave-assisted extraction can improve the extraction yield of hypericin significantly. And the coupling strategy between two methods resulted in a significant difference on the extraction yield. Microwave-assisted extraction after xylanase-assisted extraction was found to be the most efficient strategy for extracting hypericin. The yield was 0.319 ± 0.006 mg g ⁻¹ , which was a 209.7% increase over unassisted extraction. The combination of enzyme assisted extraction followed by microwave assisted extraction can be more commonly applied to improve extraction efficiency of bioactive compounds from plants.

Representation learning (RL) has recently proven to be effective in capturing local item relationships by modeling item co-occurrence in individual user's interaction record. However, the value of RL for recommendation has not reached the full potential due to two major drawbacks: 1) recommendation is modeled as a rating prediction problem but should essentially be a personalized ranking one; 2) multi-level organizations of items are neglected for fine-grained item relationships. We design a unified Bayesian framework MRLR to learn user and item embeddings from a multi-level item organization, thus benefiting from RL as well as achieving the goal of personalized ranking. Extensive validation on real-world datasets shows that MRLR consistently outperforms state-of-the-art algorithms.

Collaborative filtering suffers from the problems of data spar-sity and cold start, which dramatically degrade recommendation performance. To help resolve these issues, we propose TntstSVD, a trust-based matrix factorization technique. By analyzing the social trust data from four real-world data sets, we conclude that not only the explicit but also the implicit influence of both ratings and trust should be taken into consideration in a recommendation model. Hence, we build on top of a state-of-the-art recommendation algorithm SVD++ which inherently involves the explicit and implicit influence of rated items, by further incorporating both the explicit and implicit influence of trusted users on the prediction of items for an active user. To our knowledge, the work reported is the first to extend SVD++ with social trust information. Experimental results on the four data sets demonstrate that our approach TrustSVD achieves better accuracy than other ten counterparts, and can better handle the concerned issues.

The large array of recommendation algorithms proposed over the years brings a challenge in reproducing and comparing their performance. This paper introduces an open-source Java library that implements a suite of state-of-the-art algorithms as well as a series of evaluation metrics. We empirically find that LibRec performs faster than other such libraries, while achieving competitive evaluative performance.

Trust has been extensively studied and its effectiveness demonstrated in recommender systems. Due to the lack of explicit trust information in most systems, many trust metric approaches have been proposed to infer implicit trust from user ratings. However, previous works have not compared these different approaches, and oftentimes focus only on the performance of predictive item ratings. In this paper, we first analyse five kinds of trust metrics in light of the properties of trust. We conduct an empirical study to explore the ability of trust metrics to distinguish explicit trust from implicit trust and to generate accurate predictions. Experimental results on two real-world data sets show that existing trust metrics cannot provide satisfying performance, and indicate that future metrics should be designed more carefully.

Trust is one source of information that has been widely adopted to personalize online services for users, such as in product recommendations. However, trust information is usually very sparse or unavailable for most online systems. To narrow this gap, we propose a principled approach that predicts implicit trust from users' interactions, by extending a well-known trust antecedents framework. Specifically, we consider both local and global trustworthiness of target users, and form a personalized trust metric by further taking into account the active user's propensity to trust. Experimental results on two real-world datasets show that our approach works better than contemporary counterparts in terms of trust ranking performance when direct user interactions are limited.

User ratings are the essence of recommender systems in e-commerce. Lack of motivation to provide ratings and eligibility to rate generally only after purchase restrain the effectiveness of such systems and contribute to the well-known data sparsity and cold start problems. This article proposes a new information source for recommender systems, called prior ratings. Prior ratings are based on users' experiences of virtual products in a mediated environment, and they can be submitted prior to purchase. A conceptual model of prior ratings is proposed, integrating the environmental factor presence whose effects on product evaluation have not been studied previously. A user study conducted in website and virtual store modalities demonstrates the validity of the conceptual model, in that users are more willing and confident to provide prior ratings in virtual environments. A method is proposed to show how to leverage prior ratings in collaborative filtering. Experimental results indicate the effectiveness of prior ratings in improving predictive performance.