Saxophonists have different expectations from the saxophone mouthpiece, as it significantly affects the playability and the sound of the instrument. A mass personalization paradigm provides unique products to cater to their needs, using the flexibility of additive manufacturing. The lack of quantitative knowledge on mouthpiece design hinders the personalization attempts. This study aims to lay out how design parameters affect mouthpiece characteristics. Twenty-seven 3D-printed mouthpieces with varying design parameters are used in conjunction with an artificial blowing machine, to determine the acoustical relevance of the various mouthpiece designs on four selected mouthpiece features. The influence of the design parameters is evaluated statistically and via a case study with five saxophonists. The analysis shows that seven out of nine parameters tested affect the mouthpiece characteristics by relatively different amounts. A user study demonstrates that saxophonists confirm the results in 7 of 10 cases, and they prefer personalized mouthpieces in 4 of 5 cases. The results present a key contribution to the understanding of mouthpiece design. The findings provide valuable insights for new mouthpiece design and mouthpiece personalization.

The current COVID-19 pandemic has resulted in an immense and unforeseen increase in demand for personal protective equipment (PPE) for healthcare workers worldwide. Amongst other products, respirator masks are crucial to protect the users against transmission of the virus. Decontamination and reuse of the existing stock could be a solution to the shortage of new respirators. Based upon existing studies, it was found that (I) a solid quality control method is essential to test product reuse, (II) in-depth evaluation of the different parts of the filtering facepiece respirator (FFR) should be considered, and (III) communication of the reuse cycle is essential to take track of the amount of reuse, as this is limited to ensure quality. The goal of this paper is two-fold. First, we identify the impact of decontamination on the different parts of the FFRs and how the quality control should be performed. Two different types of FFRs are analysed within this paper, resulting in the recommendation of combining quantitative respirator mask fit testing with a thorough sensory evaluation of decontaminated FFRs to qualify them for reuse. Secondly, the possibilities of communication of this reuse to the eventual user are mapped through in-depth reasoning.

With the worldwide spread of the COVID-19 virus in early 2020, shortages of surgical masks and filtering facepiece respirator (FFR) masks became a critical problem. European governments recommended that civilians should not use these masks so that the shortages in the hospitals would be minimised. In Europe, civilians were instead advised to wear community face coverings. In June 2020, the European Committee for Standardisation (CEN) published CWA 17553:2020 [1–3] which formalised minimum requirements, methods of testing and use of community face coverings. The CWA 17553 is presently only a recommendation, and not an official standard such as the EN14683 standard for surgical masks or the EN149 standard for filtering facepiece respirators. Because there are different performance requirements for these three different classes of masks, it makes comparing their performance challenging. In this work, we perform particulate filtration efficiency measurement, total inward leakage measurement and breathability measurement on a range of surgical masks, filtering facepiece respirators and community face coverings. This analysis provides a useful comparison between material performance and the effectiveness of a mask’s design which is manufactured from this material.

In order to support the decision-making process of industry on how to implement Augmented Reality (AR) in production, this article wants to provide guidance through a set of comparative user studies. The results are obtained from the feedback of 160 participants who performed the same repair task on a switch cabinet of an industrial robot. The studies compare several AR instruction applications on different display devices (head-mounted display, handheld tablet PC and projection-based spatial AR) with baseline conditions (paper instructions and phone support), both in a single-user and a collaborative setting. Next to insights on the performance of the individual device types for the single mode operation, the study is able to show significant indications on AR techniques are being especially helpful in a collaborative setting.

This work presents halftoning techniques to manufacture 3D objects with the appearance of full grayscale imagery for Fused Deposition Modeling (FDM) printers. While droplet-based dithering is a common halftoning technique, this is not applicable to FDM printing, since FDM builds up objects by extruding material in semi-continuous paths. A set of three methods is presented which apply a linear halftoning principle called 'hatching' to horizontal, vertical and diagonal surfaces. These methods are better suited to FDM compared to other halftoning methods: their applicability stands irrespective of the geometry and surface slope and the perceived tone is less sensitive to the viewing angle. Furthermore, the methods have little effect on printing time. Experiments on a dual-nozzle FDM printer show promising results. Future work is required to optimize the interaction between the presented methods.

During the big Tour de France time trial on the 15th of July 2016, Tom Dumoulin was cycling in a new suit, developed jointly by Team Giant-Alpecin and TU Delft. [TUDelft 2016] The drag of different suits was optimized in the Delft wind tunnel. However, as one can't place a professional cyclist in a wind tunnel for weeks on end. For this, a 3D printed mannequin with the exact same physical measurements was made. An essential benefit using an exact replica in the wind tunnel is that it remains perfectly still, making the measurements of the airflows around the body much quicker and more accurate. Additive manufacturing was not chosen as easiest option, it lead to a collection of research opportunities. The process includes scanning, 3D segmenting, printing strategy and printing, assembling and testing. The complete process wasdone in less then 2,5 months.

Within the European Factory-in-a-day project, the aim is to improve communication between automation integrator and factory owner, in their analysis of feasibility and appropriateness of automating a manual task. A visualisation tool with preconfigured workflows and working principles, with specific focus on efficient human-robot coproduction workflows can improve this process. This paper describes the Workflow Simulation Tool, which is part of the Human-Robot Coproduction Methodology, currently in development. The tool encompasses a portable tablet PC, which runs a visual modelling environment combined with a handheld 3D scanning solution. The tool also features pre-modelled template layouts, implementation of a checklist of persistent notes and portable visual documentation. The tool's appropriateness was iteratively validated in collaboration with automation integrators. This evaluation showed that offering an interactive visual simulation enriches the dialogue during conceptual design and helps in revealing requirements that otherwise only appear during or after implementation.