Wastewater treatment technologies opened the door for recovery of extracellular polymeric substances (EPS), presenting novel opportunities for use across diverse industrial sectors. Earlier studies showed that a significant amount of phosphorus (P) is recovered within extracted EPS. P recovered within the extracted EPS is an intrinsic part of the recovered material that potentially influences its properties. Understanding the P speciation in extracted EPS lays the foundation for leveraging the incorporated P in EPS to manipulate its properties and industrial applications. This study evaluated P speciation in EPS extracted from aerobic granular sludge (AGS). A fractionation lab protocol was established to consistently distinguish P species in extracted EPS liquid phase and polymer chains. ³¹P nuclear magnetic resonance (NMR) spectroscopy was used as a complementary technique to provide additional information on P speciation and track changes in P species during the EPS extraction process. Findings showed the dominance of organic phosphorus and orthophosphates within EPS, besides other minor fractions. On average, 25% orthophosphates in the polymer liquid phase, 52% organic phosphorus (equal ratio of mono and diesters) covalently bound to the polymer chains, 16% non-apatite inorganic phosphorus (NAIP) precipitates mainly FeP and AlP, and 7% pyrophosphates (6% in the liquid phase and 1% attached to the polymer chains) were identified. Polyphosphates were detected in initial AGS but hydrolyzed to orthophosphates, pyrophosphates, and possibly organic P (forming new esters) during the EPS extraction process. The knowledge created in this study is a step towards the goal of EPS engineering, manipulating P chemistry along the extraction process and enriching certain P species in EPS based on target properties and industrial applications.

High-entropy alloys/compounds have large configurational entropy by introducing multiple components, showing improved functional properties that exceed those of conventional materials. However, how increasing entropy impacts the thermodynamic/kinetic properties in liquids that are ambiguous. Here we show this strategy in liquid electrolytes for rechargeable lithium batteries, demonstrating the substantial impact of raising the entropy of electrolytes by introducing multiple salts. Unlike all liquid electrolytes so far reported, the participation of several anionic groups in this electrolyte induces a larger diversity in solvation structures, unexpectedly decreasing solvation strengths between lithium ions and solvents/anions, facilitating lithium-ion diffusivity and the formation of stable interphase passivation layers. In comparison to the single-salt electrolytes, a low-concentration dimethyl ether electrolyte with four salts shows an enhanced cycling stability and rate capability. These findings, rationalized by the fundamental relationship between entropy-dominated solvation structures and ion transport, bring forward high-entropy electrolytes as a composition-rich and unexplored space for lithium batteries and beyond.

Developing liquid electrolytes with higher kinetics and enhanced interphase stability is one of the key challenges for lithium batteries. However, the poor solubility of lithium salts in solvents sets constraints that compromises the electrolyte properties. Here, it is shown that introducing multiple salts to form a high-entropy solution, alters the solvation structure, which can be used to raise the solubility of specific salts and stabilize electrode–electrolyte interphases. The prepared high-entropy electrolytes significantly enhance the cycling and rate performance of lithium batteries. For lithium-metal anodes the reversibility exceeds 99%, which extends the cycle life of batteries even under aggressive cycling conditions. For commercial batteries, combining a graphite anode with a LiNi_0.8Co_0.1Mn_0.1O₂ cathode, more than 1000 charge–discharge cycles are achieved while maintaining a capacity retention of more than 90%. These performance improvements with respect to regular electrolytes are rationalized by the unique features of the solvation structure in high-entropy electrolytes. The weaker solvation interaction induced by the higher disorder results in improved lithium-ion kinetics, and the altered solvation composition leads to stabilized interphases. Finally, the high-entropy, induced by the presence of multiple salts, enables a decrease in melting temperature of the electrolytes and thus enables lower battery operation temperatures without changing the solvents.

A systematic study on the physicochemical properties of two protic ionic liquids (ILs) {2-hydroxyethylammonium acetate ([Mea][Ac]) and 2-hydroxyethylammonium hexanoate ([Mea][Hex])} and their mixtures with water was performed. The density and viscosity were assessed across the entire range of aqueous dilutions between 278 and 393 K. The conductivities, water activities, and surface tension of the binary systems in water were also assessed, and the influence of anions was evaluated. Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and 1H and 13C nuclear magnetic resonance (NMR) techniques were used to study the systems at different IL compositions. The excess molar volumes (VE) and thermal expansion coefficients were calculated, with negative values for VE across the entire concentration range. Density data were fitted to a polynomial for density prediction, function of temperature, and concentration, with the average deviation percentage not exceeding 0.63%. The viscosities of the binary systems were studied considering six different models and were better predicted by the model of Herráez et al. at IL concentrations higher than 0.25 mole fraction. The systems containing [Hex]- exhibited higher water activities and lower conductivity and surface tension. All studied systems exhibited a glass transition event, which varied according to the IL composition. The FTIR and NMR analysis confirmed the distinct molecular arrangement of [Mea][Ac] and [Mea][Hex] systems.

We report herein a versatile and user-friendly synthetic methodology based on sequential functionalization that enables the synthesis of previously unknown perylene bisimide (PBI) dyes with up to five different substituents attached to the perylene core (e.g., compound 15). The key to the success of our strategy is a highly efficient regiospecific 7-mono- and 7,12-di-phenoxy bay substitution at the "imide-activated" 7- and 12-bay positions of 1,6,7,12-tetrachloroperylene monoimide diester 1. The facile subsequent conversion of the diester groups into an imide group resulted in novel PBIs (e.g., compound 14) with two phenoxy substituents specifically at the 7- and 12-bay positions. This conversion led to the activation of C-1 and C-6 bay positions, and thereafter, the remaining two chlorine atoms were substituted to obtain tetraphenoxy-PBI (compound 15) that has two different imide and three different bay substituents. The methodology provides excellent control over the functionalization pattern, which enables the synthesis of various regioisomeric pairs bearing the same bay substituents. Another important feature of this strategy is the high sensitivity of HOMO-LUMO energies and photoinduced charge transfer toward sequential functionalization. As a result, systematic fluorescence on-off switching has been demonstrated upon subsequent substitution with the electron-donating 4-methoxyphenoxy substituent.

Nucleophilic aromatic substitution reactions on 1,7-dibromoperylene-3,4,9,10-tetracarboxylic monoimide dibutylester, using phenol and pyrrolidine reagents, have been exploited to synthesize perylenes with four different substituents at the perylene core. The first substitution is always regiospecific at the imide-activated 7-position. A second substitution reaction does not always replace the bromine at C-1, but may replace a phenol substituent at the highly activated 7-position. Exploiting this reactivity pattern, a "mixed" 1,7-diphenoxy, 1,7-dipyrrolidinyl, and two 1-phenoxy-7-pyrrolidinyl derivatives have been synthesized.