UV sensors hold significant promise for various applications in both military and civilian domains. However, achieving exceptional detectivity, responsivity, and rapid rise/decay times remains a notable challenge. In this study, we address this challenge by investigating the photodetection properties of CdS thin films and the influence of surface-deposited gold nanoparticles (AuNPs) on their performance. CdS thin films were produced using the pulsed laser deposition (PLD) technique on glass substrates, with CdS layers at a 100, 150, and 200 nm thickness. Extensive characterization was performed to evaluate the thin films’ structural, morphological, and optical properties. Photodetector devices based on CdS and AuNPs/CdS films were fabricated, and their performance parameters were evaluated under 365 nm light illumination. Our findings demonstrated that reducing CdS layer thickness enhanced performance concerning detectivity, responsivity, external quantum efficiency (EQE), and photocurrent gain. Furthermore, AuNP deposition on the surface of CdS films exhibited a substantial influence, especially on devices with thinner CdS layers. Among the configurations, AuNPs/CdS(100 nm) demonstrated the highest values in all evaluated parameters, including detectivity (1.1×1012 Jones), responsivity (13.86 A/W), EQE (47.2%), and photocurrent gain (9.2).@en

Copper zinc tin sulfide (CZTS) thin films were synthesized on soda lime glass using pulsed laser deposition (PLD) at room temperature. Introducing gold nanoparticles (AuNPs) in a sandwich structure led to increased CZTS particle size and a shift in the localized surface plasmon resonance (LSPR) peak of the AuNPs, influenced by different laser energy levels. The absorption measurements revealed intriguing behavior across the visible and near-infrared (NIR) regions, making these films appealing for 1 Sun photodetectors. Furthermore, the presence of AuNPs in the sandwich structure reduced microstrain effects, measuring 1.94 × 10−3 compared to 3.38 × 10−3 in their absence. This reduction directly enhances carrier transport, which is particularly beneficial for accelerating the performance of photodetector devices. This effect of AuNPs also contributed to higher dielectric coefficients, further improving the photodetector performance. Under 1 Sun illumination conditions, this enhancement resulted in a rapid rising time of 95.4 ms, showcasing the potential for faster photodetection.@en

The atomic layer deposition (ALD) technique has attracted significant attention because it enables the control of film synthesis at the subnanometre scale. Herein, molybdenum oxide (MoO₃) ultrathin films using the ALD system through Bis(t-butylimido)bis(dimethylamino)molybdenum (VI) as a molybdenum (Mo) source are prepared. To understand the effect of deposition temperature, thin films are prepared at three different temperatures 100, 150, and 250 °C. The morphological and elemental properties are assessed using a field emission scanning electron microscope, scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy techniques. It is observed that the film thicknesses increase with the increase in the deposition temperature. It is found that the film growth at 150 °C is the most potential one for UV optoelectronic applications with high stability even under low applied bias voltages. Moreover, these films show interesting nonlinear optical behaviors as investigated with the z-scan technique applying open and closed aperture methods. The calculated nonlinear optical parameters including nonlinear absorption coefficient (β), nonlinear refractive index (n ₂), nonlinear refractive coefficient (γ), and third-order nonlinear susceptibility (χ ⁽³⁾) are 10⁻¹¹ m W⁻¹, 10⁻¹⁶ cm² W⁻¹, 10⁻¹¹ cm² W⁻¹, and 10⁻¹¹ esu, respectively.

@en

The aim of this research is to analyze the influence of various factors on the photo-ionization cross-section in (Al, Ga)N/AlN double triangular quantum wells. Using the finite difference method, the effects of the electric field, hydrostatic pressure, temperature, and Ga concentration were investigated within the effective mass and parabolic approximations. Our findings show that the photo-ionization cross-section (PICS) is highly dependent on all the variables under consideration. The optical spectra were blue-shifted with increasing electric field and pressure and red-shifted with increasing temperature and impurity displacement far from the center of the structure. Furthermore, it was found that changes in gallium content and impurity position can increase the PICS amplitude. A comparison of the obtained results with the existing literature as a limiting case of the reported problem is also provided, and excellent agreement is found.

@en

The aim of this research is to analyze the influence of various factors on the photo-ionization cross-section in (Al, Ga)N/AlN double triangular quantum wells. Using the finite difference method, the effects of the electric field, hydrostatic pressure, temperature, and Ga concentration were investigated within the effective mass and parabolic approximations. Our findings show that the photo-ionization cross-section (PICS) is highly dependent on all the variables under consideration. The optical spectra were blue-shifted with increasing electric field and pressure and red-shifted with increasing temperature and impurity displacement far from the center of the structure. Furthermore, it was found that changes in gallium content and impurity position can increase the PICS amplitude. A comparison of the obtained results with the existing literature as a limiting case of the reported problem is also provided, and excellent agreement is found.

@en

The aim of this research is to analyze the influence of various factors on the photo-ionization cross-section in (Al, Ga)N/AlN double triangular quantum wells. Using the finite difference method, the effects of the electric field, hydrostatic pressure, temperature, and Ga concentration were investigated within the effective mass and parabolic approximations. Our findings show that the photo-ionization cross-section (PICS) is highly dependent on all the variables under consideration. The optical spectra were blue-shifted with increasing electric field and pressure and red-shifted with increasing temperature and impurity displacement far from the center of the structure. Furthermore, it was found that changes in gallium content and impurity position can increase the PICS amplitude. A comparison of the obtained results with the existing literature as a limiting case of the reported problem is also provided, and excellent agreement is found.

@en

Gold (Au) nanoparticles trapped within Cu₂SnS₃ (CTS) thin films were effectively deposited on a low-cost glass substrate using a simple pulsed laser deposition of 15 mJ for 5 ns at a 10 Hz repetition rate. The film's structural, morphological, topography, optical, and optoelectronic properties were investigated. Highly crystalline ternary chalcogenide CTS with tetragonal symmetry and 17 nm grain size is prepared. The 110 Ω resistivity of the thin film increases up to 125 Ω indicating a negative photoresponse under visible light excitation. The decrease in the photocurrent is also observed with Cu₂SnS₃/Au/Cu₂SnS₃ sandwich ternary chalcogenide structure at resistivities values from 31 to 35 Ω and a Joule effect influence the presence of plasmonic Au nanoparticle interlayers involved a lower phonon disorder given a higher photoresponse effect as predicted from Urbach energy.

@en

Gold (Au) nanoparticles trapped within Cu₂SnS₃ (CTS) thin films were effectively deposited on a low-cost glass substrate using a simple pulsed laser deposition of 15 mJ for 5 ns at a 10 Hz repetition rate. The film's structural, morphological, topography, optical, and optoelectronic properties were investigated. Highly crystalline ternary chalcogenide CTS with tetragonal symmetry and 17 nm grain size is prepared. The 110 Ω resistivity of the thin film increases up to 125 Ω indicating a negative photoresponse under visible light excitation. The decrease in the photocurrent is also observed with Cu₂SnS₃/Au/Cu₂SnS₃ sandwich ternary chalcogenide structure at resistivities values from 31 to 35 Ω and a Joule effect influence the presence of plasmonic Au nanoparticle interlayers involved a lower phonon disorder given a higher photoresponse effect as predicted from Urbach energy.

@en