This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

This study focused on investigating the optoelectronic properties of molybdenum trioxide (α-MoO₃) thin films using the atomic layer deposition (ALD) technique through different cycle numbers and theoretical investigation. Initial band gap calculations using standard DFT with GGA-PBE resulted in a value of 1.19 eV, which deviated significantly from experimental measurements. The GGA + U method with Hubbard U corrections was applied for the first time to improve the accuracy. This refinement led to a more precise band gap value of 3.09 eV, closely matching previously reported experimental data. The electronic parameters of the α-MoO₃ photodetector, such as ideality factor (n), barrier height (Φ₀), and series resistance (R_s), were analyzed using the thermionic emission theory and confirmed by Cheung and Nord's methods. The results demonstrated that the sample deposited with 100 pulses exhibited higher photodetector performance under UV illumination, despite having a lower R_s.

To study the structural, electronic, and optical properties of lead-free Barium titanate BaTiO₃ (BT) ferroelectric material in its tetragonal structure, a combination of experimental and theoretical studies has been used and the obtained results were discussed. The studied BT compound was prepared via the sol–gel technique. The calculated bandgap energy (E_g) and structural parameters of BT are determined using four types of exchange–correlation functionals (PBE, PBEsol, LDA, and PW91) in the perspective of the density functional theory (DFT). XRD and Raman analysis have shown that BT ceramic exhibits a tetragonal phase structure without any trace of impurity phases. The UV–vis investigation showed that BT has a bandgap energy of 3.19 eV, which is larger than the theoretically calculated values. The computed lattice parameter c is overestimated (as large as ~1% deviation) when using the LDA approximation. In contrast, PBEsol proved that those lattice constants were close to the experimental values (a deviation of less than 1%).

To study the structural, electronic, and optical properties of lead-free Barium titanate BaTiO₃ (BT) ferroelectric material in its tetragonal structure, a combination of experimental and theoretical studies has been used and the obtained results were discussed. The studied BT compound was prepared via the sol–gel technique. The calculated bandgap energy (E_g) and structural parameters of BT are determined using four types of exchange–correlation functionals (PBE, PBEsol, LDA, and PW91) in the perspective of the density functional theory (DFT). XRD and Raman analysis have shown that BT ceramic exhibits a tetragonal phase structure without any trace of impurity phases. The UV–vis investigation showed that BT has a bandgap energy of 3.19 eV, which is larger than the theoretically calculated values. The computed lattice parameter c is overestimated (as large as ~1% deviation) when using the LDA approximation. In contrast, PBEsol proved that those lattice constants were close to the experimental values (a deviation of less than 1%).