Theodore James Reck
14 records found
1
Authored
This article presents a low-loss silicon microelectrical mechanical system (MEMS) phase shifter operating in the 500-600 GHz band. The phase shifter consists of a \text{30-}\mu \text{m} thick perforated silicon slab that is moved in and out of a waveguide in the E-plane with a ...
Micromachining for Advanced Terahertz
Interconnects and Packaging Techniques at Terahertz Frequencies
It is difficult to package and interconnect components and devices at millimeter-waves (mm-waves) due to excessive losses experiences at these frequencies using traditional techniques. The problem is multiplied manifold at terahertz (THz) frequencies. In this article, we revie ...
This paper presents a Ku -band (14-16 GHz) CMOS frequency-modulated continuous-wave (FMCW) radar transceiver developed to measure dry-snow depth for water management purposes and to aid in retrieval of snow water equivalent. An on-chip direct digital frequency synthesizer and ...
We designed and microfabricated a (2×2) silicon platelet horn antenna at 560 GHz, which is the highest frequency ever among silicon corrugated horn antennas. This was enabled by a silicon compression pin alignment technique of which inaccuracy is less than ± 2 μm in layer-to-l ...
The development at 1.9 THz of a microlens antenna consisting of a leaky-wave waveguide feeding and a silicon microlens is presented in this paper. The antenna has excellent performances compared to horn antennas and can be fabricated entirely using silicon micromachining. Two ...
This paper describes the design and realization of a modulated metasurface (MTS) antenna at 300 GHz. To overcome the hurdles associated with the use of dielectric substrates in the sub-millimeter wave range, we propose an MTS structure which consists of an array of metalized c ...
Using newly developed silicon micromachining technology that enables low-loss and highly integrated packaging solutions, we are developing vertically stacked transmitters and receivers at terahertz frequencies that can be used for communication and other terahertz systems. Alt ...
We explore the use of a class of metasurface (MTS), which consists of metalized cylinders arranged in a square lattice and placed on a ground plane, for the realization of antennas at terahertz (THz) frequencies. This MTS is particularly appropriate for being micromachined out ...
Using newly developed silicon micromachining technology that enables low-mass and highly integrated receivers, we are developing state-of-the-art terahertz spectrometer instruments for space-based planetary and astrophysics orbiter missions. Our flexible receiver with integrat ...
Increasingly, terahertz systems are being used for multi-pixel receivers for different applications from mapping the star-forming regions of galaxies to stand-off radar imaging. Since microstrip patch antennas are too lossy and corrugated horn antenna arrays are difficult to m ...