Sulfide solid electrolytes possess high ionic conductivity and moderate dendrite suppression capability, but rather poor compatibility against oxide cathodes and metallic Li. Here, we report O-doped Li₆PS₅Br as solid electrolyte synthesized by a facile solid-state sintering. Different from other O-incorporated sulfides, the O atoms in Li₆PS_5-xO_xBr prefer to substitute the S atoms at free S²⁻ sites rather than those at the PS₄ tetrahedra. Remarkably, without deteriorating the ionic conductivity, this inorganic solid electrolyte with O doping exhibits comprehensively enhanced properties including excellent dendrite suppression capability, superior electrochemical and chemical stability against Li metal as well as high voltage oxide cathodes, and good air stability. Li(Ni_0.8Co_0.1Mn_0.1)O₂ and LiCoO₂-based all-solid-state batteries with Li₆PS_4.7O_0.3Br electrolyte deliver high specific capacity, superior rate capability, and outstanding cycling stability accompanied with low interfacial resistivity. This type of inorganic solid electrolytes is promising for all-solid-state batteries with high energy density.

It is a highly relevant topic concerning how to improve the electrochemical performance of anode materials for the next generation lithium-ion batteries (LIBs). Herein, for the first time, we report a facile and controllable approach to modify MoS ₂ nanosheets, a typical 2D material, as an anode material for advanced LIBs via oxygen plasma engineering. An oxygen plasma treatment not only generates vacancies/defects but also incorporates heteroatom doping to form Mo–O–C bonds. This unique hybrid specialty enables the oxygen-plasma-treated MoS ₂ to achieve superior electrochemical performance with high reversible capacities, a long-term cycle life, and good rate capabilities. The plasma-assisted modification is believed to be applicable for other 2D materials as an efficient anode for energy storages.

High grain-boundary resistance, Li-dendrite formation, and electrode/Li interfacial resistance are three major issues facing garnet-based solid electrolytes. Herein, interfacial architecture engineering by incorporating 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl) imide (BMP-TFSI) ionic liquid into a garnet oxide is proposed. The “soft” continuous BMP-TFSI coating with no added Li salt generates a conducting network facilitating Li⁺ transport and thus changes the ion conduction mode from point contacts to face contacts. The compacted microstructure suppresses Li-dendrite growth and shows good interfacial compatibility and interfacial wettability toward Li metal. Along with a broad electrochemical window larger than 5.5 V and an Li⁺ transference number that practically reaches unity, LiNi_0.8Co_0.1Mn_0.1O₂/Li and LiFePO₄/Li solid-state batteries with the hybrid solid electrolyte exhibit superior cycling stability and low polarization, comparable to those with commercial liquid electrolytes, and excellent rate capability that is better than those of Li-salt-based ionic-liquid electrolytes.

Exploration of advanced anode materials is a highly relevant research topic for next generation lithium-ion batteries. Here, we report severe lattice distorted MoS₂ nanosheets with a flower-like morphology prepared with PEG400 as additive, which acts not only as surfactant but importantly, also as reactant. Notably, in the absence of a carbon-related incorporation/decoration, it demonstrates superior electrochemical performance with a high reversible capacity, a good cycling stability, and an excellent rate capability, originated from the advantages of synthesized MoS₂ including enlarged interlayer spacing, 1T-like metallic behavior, and coupling of Mo–O–C (and Mo–O) hetero-bonds. PEG-assisted synthesis is believed applicable to other anode materials with a layered structure for lithium-ion batteries.

Exploration of advanced solid electrolytes with good interfacial stability toward electrodes is a highly relevant research topic for all-solid-state batteries. Here, we report PCL/SN blends integrating with PAN-skeleton as solid polymer electrolyte prepared by a facile method. This polymer electrolyte with hierarchical architectures exhibits high ionic conductivity, large electrochemical windows, high degree flexibility, good flame-retardance ability, and thermal stability (workable at 80 °C). Additionally, it demonstrates superior compatibility and electrochemical stability toward metallic Li as well as LiFePO₄ cathode. The electrolyte/electrode interfaces are very stable even subjected to 4.5 V at charging state for long time. The LiFePO₄/Li all-solid-state cells based on this electrolyte deliver high capacity, outstanding cycling stability, and superior rate capability better than those based on liquid electrolyte. This solid polymer electrolyte is eligible for next generation high energy density all-solid-state batteries.