Restoration engineering measures, such as managed realignments or building groins, modify the environmental characteristics of coastal intertidal ecosystems. Creating physical modifications that are beneficial to an intertidal system's ecology necessitates an in-depth understanding of the relationships between the abiotic and biotic components of a given intertidal habitat. In this study, we evaluate how hydrodynamics and sediment characteristics drive the development of the benthic macrofauna community during the first 5 years following engineering measures to enhance benthic macrofauna diversity at three locations. The creation of low-energy habitats through groins (Knuitershoek and Baalhoek) and a managed realignment dike breach (Perkpolder) led to the accumulation of fine sediments in all three impact sites. Biomass of benthic macrofauna quickly increased between 2016 and 2020, with successional processes being more important in Perkpolder, where the habitat was started completely from scratch due to a managed realignment, than at Knuitershoek or Baalhoek, where habitat conditions were improved by adding groins. In addition, the density of benthos-eating birds, especially oystercatchers, increased at some of the modified sites. While a low-energy habitat may harbor more diverse assemblages of benthic macrofauna than a highly dynamic one, the extremely high silt content, which is typical for low-energy habitats, may slow benthic community development. The observed increase of biomass at our impact sites highlights the value of the interventions, while the delays in the response of the benthic macrofauna community emphasizes the need for extensive monitoring both in time and space and the identification of underlying abiotic–biotic mechanisms.

@en

Floating breakwaters are moored structures that attenuate wave energy through a combination of reflection and dissipation. Studies into floating breakwaters have been generally restricted to optimising the attenuation performance. This study presents a novel floating breakwater type that was developed to have good attenuation performance while keeping wave drift loads as small as possible. The floating breakwater was designed as a submerged parabolic beach that enforces wave energy dissipation through breaking. The design was tested in a 3D shallow-water wave basin in captive and moored setups for regular and irregular wave conditions. Results are presented in terms of attenuation performance, motions, and (mooring) loads. The results show that the breaking of waves improves the attenuation performance of the floater in captive setup. However, in moored setup, the attenuation performance was dominated by diffraction and radiation of the wave field, with breaking being of secondary importance. This shows that breaking-enforcing floating breakwaters have potential, but require a high vertical hydrostatic and/or mooring stiffness in order to enforce intense breaking. Mean wave drift loads on the object showed significant difference between breaking and non-breaking waves in both setups, with breaking waves leading to lower normalized loads. This is attributed to breaking-induced set-up and set-down of the water level. As a result, the new breakwater design has a more favourable balance between wave attenuation and drift loads than common (i.e., box-, pontoon-, or mat-type) floating breakwater designs. Tests with varying surface roughness showed that floating breakwaters may benefit from dual-use functions that naturally increase the roughness (e.g., shellfish, vegetation), which have a marginal effect on the attenuation performance, but increase the added mass and hydrodynamic damping and as such, reduce mooring line loads.@en

Predictive models accounting for the effect of bioturbation on sediment resuspension must be based on ecological theory as well as on empirical parametrizations. The scaling trend of individual metabolic and activity rates with body mass may be a key to the mechanistic understanding of the observed patterns. With this study we tested if general size scaling rules in bio-mediated sediment resuspension may apply to a broad range of physical contexts for the endobenthic bivalve Cerastoderma edule. The effect on sediment resuspension of populations of C. edule differing by individual size was measured across physical gradients of current velocity and sediment composition in terms of fraction of fine particles. C. edule were able to enhance the resuspension of sediment containing silt, while they had scarce effect on the resuspension of coarse sediment. The effect of bioturbation was maximal at intermediate current velocity, when the hydrodynamic forcing is not strong enough to overcome the abiotic sediment resistance but it is able to suspend the bioturbated sediment. Although differences in sediment silt content and intensities of hydrodynamic stress have a relevant influence in determining the bioturbators individual contribution to sediment resuspension, the observed mass scaling trend is consistent across all treatments and close to theoretical expectation for size scaling of individual metabolic rates. This observation supports the hypothesis that the contribution of individual bioturbators to sediment resuspension is directly related to their energy use. Therefore, the proposed approach allows the formulation of expectations of biotic contribution to sediment resuspension based on the general size scaling laws of individual energy use.@en