Laboratory investigations of beach morphology change under wave action are undertaken to gain insight into coastal processes, design coastal structures and validate the predictions of numerical models. For the results of such experiments to be reliable, it is necessary that they are repeatable. The equilibrium beach concept, that beach morphology will evolve to a quasi-static equilibrium shape for a given forcing suggests that experiments should be repeatable to some degree. However, sediment transport in turbulent breaking and broken waves is complex and highly variable and the level of repeatability at different temporal and spatial scales is challenging to measure, as such, previous work has restricted comparisons to small numbers of waves. Here we use the results of two identical, 20-h large-scale wave flume experiments to investigate the repeatability of sediment transport and beach morphology change under waves at timescales down to individual swash events. It is shown that while flow characteristics from identical swash events are very repeatable, the sediment transported can be very different in both magnitude and direction due to differences in turbulence, sediment advection and morphological feedback. Over longer periods containing multiple matching swash events however, the beach responds in a very similar manner, with the level of morphological repeatability increasing with time. The results also demonstrate that gross swash zone sediment transport remains high even as a beach profile approaches quasi-equilibrium, but the proportion of individual swash events that cause large sediment fluxes (>±7.5 kg/event/m) reduces with time. The results of this laboratory study indicate that beach morphology change has a level of determinism over timescales of several minutes and longer, giving confidence in the results from physical modelling studies. However, the large differences in sediment transport from apparently identical swash events questions the value in pursuing numerical predictions of sediment transport at the wave-by-wave timescale unless the reversals in sediment transport between apparently near identical swash events can also be predicted.

@en

Pressure on the coastline is escalating due to the impacts of climate change, this is leading to a rise in sea-levels and intensifying storminess. Consequently, many regions of the coast are at increased risk of erosion and flooding. Therefore coastal protection schemes will increase in cost and scale. In response there is a growing use of nature-based coastal protection which aim to be sustainable, effective and adaptable. An example of a nature-based solution is a dynamic cobble berm revetment: a berm constructed from cobble and other gravel sediments at the high tide wave runup limit. These structures limit wave excursion protecting the hinterland from inundation, stabilise the upper beach and adapt to changes in water level. Recent experiments and field applications have shown the suitability of these structures for coastal protection, however many of the processes and design considerations are poorly understood. This study directly compares two prototype scale laboratory experiments which tested dynamic cobble berm revetments constructed with approximately the same geometry but differing gravel characteristics; well-sorted rounded gravel (DynaRev1) and poorly-sorted angular gravel (DynaRev2). In both cases the structures were tested using identical wave forcing including incrementally increasing water level and erosive wave conditions. The results presented in this paper demonstrate that both designs responded to changing water level and wave conditions by approaching a dynamically stable state, where individual gravel is mobilised under wave action but the geometry remains approximately constant. Further, both structures acted to reduce swash excursions compared to a pure sand beach. However, their morphological behaviour is response to wave action varied considerably. Once overtopping of the designed crest occurred, the poorly-sorted revetment developed a peaked crest which grew in elevation as the water level or wave height increased, further limited overtopping. By comparison, the well-sorted revetment was characterised by a larger volume of submerged gravel and a lower elevation flat crest which responded less well to changes in conditions. This occurred due to two processes: (1) for the poorly-sorted case, gravel sorting processes moved small to medium gravel material (D₅₀<70mm) to the crest and (2) the angular nature of the poorly-sorted gravel material promoted increased interlocking. Both of these processes led to a gravel matrix that is more resistant to wave action and gravitational effects. Both revetments experienced some sinking due to sand erosion beneath the front slope. The rate of sinking for the well-sorted case was larger and continued throughout due to the large pore spaces within the gravel matrix. For the poorly sorted revetment in DynaRev2, sand erosion ceased after approximately 28 h due to the development of a filter layer of small gravel at the sand-gravel interface reducing porosity at this location, hence a larger volume of sand was preserved beneath the structure. Both designs present a low-cost and effective solution for protecting sandy coastlines but from an engineering viewpoint it appears better to avoid well-sorted gravel material and greater gravel angularity has been seen to increase crest stability.

@en

Ageing stock and extreme weather events pose a threat to the safety of infrastructure networks. In most countries, funding allocated to infrastructure management is insufficient to perform systematic inspections over large transport networks. As a result, early signs of distress can develop unnoticed, potentially leading to catastrophic structural failures. Over the past 20 years, a wealth of literature has demonstrated the capability of satellite-based Synthetic Aperture Radar Interferometry (InSAR) to accurately detect surface deformations of different types of assets. Thanks to the high accuracy and spatial density of measurements, and a short revisit time, space-borne remote-sensing techniques have the potential to provide a cost-effective and near real-time monitoring tool. Whilst InSAR techniques offer an effective approach for structural health monitoring, they also provide a large amount of data. For civil engineering procedures, these need to be analysed in combination with large infrastructure inventories. Over a regional scale, the manual extraction of InSAR-derived displacements from individual assets is extremely time-consuming and an automated integration of the two datasets is essential to effectively assess infrastructure systems. This paper presents a new methodology based on the fully automated integration of InSAR-based measurements and Geographic Information System-infrastructure inventories to detect potential warnings over extensive transport networks. A Sentinel dataset from 2016 to 2019 is used to analyse the Los Angeles highway and freeway network, while the Italian motorway network is evaluated by using open access ERS/Envisat datasets between 1992 and 2010, COSMO-SkyMed datasets between 2008 and 2014 and Sentinel datasets between 2014 and 2020. To demonstrate the flexibility of the proposed methodology to different SAR sensors and infrastructure classes, the analysis of bridges and viaducts in the two test areas is also performed. The outcomes highlight the potential of the proposed methodology to be integrated into structural health monitoring systems and improve current procedures for transport network management.

@en

Worldwide, transport infrastructure is increasingly vulnerable to aging-induced deterioration and climate-related hazards. Often, inspection and maintenance costs far exceed the available resources, and numerous assets lack any rigorous structural evaluation. Space-borne synthetic aperture radar interferometry (InSAR) is a powerful remote sensing technology that can provide cheaper deformation measurements for bridges and other transport infrastructure with short revisit times, while scaling from the local to the global scale. As recent studies have shown InSAR accuracy to be comparable to that of traditional monitoring instruments, InSAR could offer a cost-effective tool for long-term, near-continuous deformation monitoring, with the possibility of supporting inspection planning and maintenance prioritisation while maximising functionality and increasing the resilience of infrastructure networks. However, despite the high potential of InSAR for structural monitoring, some important limitations need to be considered when applying it in practice. In this paper, the challenges of using InSAR for the purpose of structural monitoring are identified and discussed, with specific focus on bridges and transport networks. Examples are presented to illustrate the current practical limitations of InSAR, and possible solutions and promising research directions are identified. The aim of the paper is to motivate future action in this area and highlight the InSAR advances needed to overcome current challenges.

@en

In western countries, thousands of infrastructure assets have exceeded their intended design life and need continuous monitoring. Space-borne Interferometric Synthetic Aperture Radars (InSAR) are capable of wide-area monitoring, providing inexpensive and high-density measurements of buildings and infrastructure deformations with a millimetre-scale accuracy. Infrastructure catalogues can be used to associate the InSAR-based measurements with the corresponding structures. However, when large infrastructure networks are analysed, the manual extraction of the relevant InSAR-derived displacements is not feasible. In this paper, a new methodology based on the automated integration of InSAR-based displacements and infrastructure databases to warn potentially anomalous deformations over large infrastructure networks is presented. The proposed methodology is applied to the Los Angeles highway and freeway network, using Sentinel data from 2016 to 2019. Results can have a direct impact on transportation network management.@en

High quality laboratory measurements of nearshore waves and morphology change at, or near prototype-scale are essential to support new understanding of coastal processes and enable the development and validation of predictive models. The DynaRev experiment was completed at the GWK large wave flume over 8 weeks during 2017 to investigate the response of a sandy beach to water level rise and varying wave conditions with and without a dynamic cobble berm revetment, as well as the resilience of the revetment itself. A large array of instrumentation was used throughout the experiment to capture: (1) wave transformation from intermediate water depths to the runup limit at high spatio-temporal resolution, (2) beach profile change including wave-by-wave changes in the swash zone, (3) detailed hydro and morphodynamic measurements around a developing and a translating sandbar.

@en