J

Jaco

8 records found

Authored

Fabry–Perot interferometers (FPIs), comprising foundry-compatible dielectric thin films on sapphire wafer substrates, were investigated for possible use in chemical sensing. Specifically, structures comprising two vertically stacked distributed Bragg reflectors (DBRs), with the l ...

Ensuring optical transparency over a wide spectral range of a window with a view into the tailpipe of the combustion engine, while it is exposed to the harsh environment of sootcontaining exhaust gas, is an essential pre-requisite for introducing optical techniques for long-te ...

Exhaust gas measurement in the harsh environment of the tailpipe by optical techniques is a highly robust technique, provided that optical access is maintained in the presence of soot. The design, fabrication, and testing of membranes in SiC-on-Si with integrated heaters to se ...

Continuous monitoring of the composition of E85 biofuel is essential for a quick start and clean and efficient operation of Flex-Fuel Vehicles. The actual ethanol concentration in E85 fuel is in the range 50%–85% and fuel-line sensors are used for ethanol-gasoline composition mea ...
Silicon waveguide structures with SiO<inf>2</inf> cladding and tapered on-chip couplers are fabricated on Si wafers for use in water-containing biofuel composition measurement in the 2.4- 2.6 μm respectively 3.5-3.8 μm water and ethanol dominated absorption bands.@en
Thermal impedance spectroscopy has been investigated as a non-destructive technique to determine the composition of ternary mixtures of biofuels. The principle of the thermal conductivity detector has been extended for measuring both the thermal conductivity and the thermal capac ...
Measuring the ethanol/water ratio in biofuel of high ethanol content, such as E85, is important when used in a flex-fuel engine. A capacitive probe is generally used for measuring the ethanol/gasoline ratio. However, the water content in E85 biofuel cannot be disregarded or consi ...

A capacitive probe is generally used in a flex-fuel engine for measuring the ethanol content in biofuel. However, the water content in biofuel of high ethanol content cannot be disregarded or considered constant and the full composition measurement of ethanol, gasoline and wat ...