Modification of paint with nanoparticles (NPs) provides self-cleaning, water/dirt-repellent, and other properties. Therefore, the aim of the present study was to biosynthesize silver (Ag) and copper oxide (CuO) NPs and to prepare NP-modified paint. To this end, AgNPs and CuONPs were biosynthesized using Bacillus atrophaeus spores and commercial and crude dipicolinic acid (DPA) extracted from the spore of this bacterium. The synthesized NPs were characterized using electron microscopy, Fourier-transform infrared (FTIR), X-ray diffraction analysis (XRD), and energy-dispersive X-ray spectroscopy (EDS) methods. A minimum inhibitory concentration (MIC) assay of NPs against Escherichia coli ATCC8739 and Staphylococcus aureus ATCC6538 was carried out. The antibacterial effects of prepared NP–paint complexes were assessed using an optical density (OD) comparison before and after adding metal sheets coated with NP–paint complexes into the nutrient broth medium. Four different types of NPs were synthesized in this research: AgNPs synthesized by spore (A), AgNPs synthesized by commercial DPA (B), AgNPs synthesized by crude DPA (C), and CuONPs synthesized by spore (D). SEM analysis confirmed the spherical shape of NPs. According to the results, NPs A, B, and D showed higher antibacterial activity against S. aureus compared to E. coli. Furthermore, the analysis of the antibacterial effects of NP–paint complexes suggested that paint–NPs A, B, and C displayed higher activity on E. coli compared to S. aureus. Moreover, the antibacterial effect of paint–NP D was significantly lower than other NPs. According to this robust antibacterial effect on pathogenic bacteria, it seems that these NP–paint complexes could be useful in public places such as hospitals, airports, dormitories, schools, and office buildings, where the rate of transmission of infection is high.@en

This study presents a failure analysis in two reformer tubes used for hydrogen production in a petrochemical industry. These tubes (Tube A and Tube B) were made by the centrifugal casting of HP-Nb alloy in such a way that one contained titanium as a micro-element, and the other was free from titanium in its chemical composition. Although the two tubes were subjected to similar creep conditions, Tube A failed after only 46,000 h of operation against the design life of 100,000 h. SEM images showed initiation and growth of creep pores next to chromium carbide particles, as well as the formation of microcracks in Cr23C6 carbides. Pore initiation occurs as a result of grain boundary sliding and is strongly dependent on structural morphology. The tube containing titanium (Tube B) showed higher thermal stability and higher creep resistance than the tube without titanium (Tube A), which was due to the formation of finer and more discrete carbide particles. The final fracture of the tube without titanium (Tube A) occurred due to the coalescence of creep pores and the creation of grain boundary cracks.@en

This paper investigates the synthesis, antibacterial, and photocatalytic properties of silver ion-exchanged natural zeolite/TiO2 photocatalyst nanocomposite. Zeolite is known to have a porous surface structure, making it an ideal substrate and framework in different nanocomposites. Moreover, natural zeolite has a superior thermal and chemical stability, with hardly any reactivity with chemicals. Finding an effective and low-cost method to remove both antibiotics and bacteria from water resources has become a vital global issue due to the worldwide excessive use of chemicals and antibiotics. This research aims to propose a facile method to synthesize Ag-ion-exchanged zeolite/TiO2 catalyst for anti-bacterial purposes and photocatalytic removal of atibiotics from wastewaters. TiO2 particles were deposited on the surface of natural zeolite. Ag ion exchanging was performed via a liquid ion-exchange method using 0.1 M AgNO3 solution. X-ray diffractometry (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FTIR) were used to evaluate the structure of synthesized powders. Antibacterial activities of samples were assessed, using Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922 by disc diffusion method. It was shown that Ag-containing nanocomposite samples have an improved antibacterial performance in both cases. Results showed that the synthesized catalyst has promising potentials in wastewater treatment.@en

This paper investigates the photocatalytic characteristics of Ag nanowire (AgNW)/TiO2 and AgNW/TiO2/graphene oxide (GO) nanocomposites. Samples were synthesized by the direct coating of TiO2 particles on the surface of silver nanowires. As-prepared AgNW/TiO2 and AgNW/TiO2/GO nanocomposites were characterized by electron microscopy, X-ray diffraction, UV/visible absorption spectroscopy, and infrared spectroscopy. Transmission electron microscope (TEM) images confirmed the successful deposition of TiO2 nanoparticles on the surface of AgNWs. The photocatalytic activity of synthesized nanocomposites was evaluated using Rhodamine B (RhB) in an aqueous solution as the model organic dye. Results showed that synthesized AgNW/TiO2/GO nanocomposite has superior photocatalytic activities when it comes to the decomposition of RhB.

@en

This paper investigates the synthesis and characterization of photoactive TiO₂/CuO nanocomposites for the simultaneous antibacterial applications and photocatalytic removal of Amoxicilline from wastewaters. Effective removal of biological and organic contaminants from water resources has become a global challenge due to contaminants' complexity and extensive use. TiO₂/CuO heterojunctions with different CuO loadings were synthesized using a straightforward precipitation method. Electron microscopy, energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier transformed infrared (FTIR), ultraviolet–visible (UV-VIS) analyses were used to characterize synthesized samples. Antibacterial activities of samples were investigated against Staphylococcus aureus. Also, the applicability of synthesized powders in the photocatalytic removal of Amoxicilline from wastewater was methodically investigated. Results showed that the photocatalytic activity of synthesized TiO₂/CuO nanocomposites is highly dependent on the CuO loadings of samples. CuO loading can also increase the light absorption within the visible light region, making TiO₂/CuO samples applicable in the visible light region. Results also showed that CuO loading greatly enhances the antibacterial characteristics of samples.

@en

This paper investigates the synthesis and characterization of photoactive TiO₂/CuO nanocomposites for the simultaneous antibacterial applications and photocatalytic removal of Amoxicilline from wastewaters. Effective removal of biological and organic contaminants from water resources has become a global challenge due to contaminants' complexity and extensive use. TiO₂/CuO heterojunctions with different CuO loadings were synthesized using a straightforward precipitation method. Electron microscopy, energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier transformed infrared (FTIR), ultraviolet–visible (UV-VIS) analyses were used to characterize synthesized samples. Antibacterial activities of samples were investigated against Staphylococcus aureus. Also, the applicability of synthesized powders in the photocatalytic removal of Amoxicilline from wastewater was methodically investigated. Results showed that the photocatalytic activity of synthesized TiO₂/CuO nanocomposites is highly dependent on the CuO loadings of samples. CuO loading can also increase the light absorption within the visible light region, making TiO₂/CuO samples applicable in the visible light region. Results also showed that CuO loading greatly enhances the antibacterial characteristics of samples.

@en

This paper aims to investigate the synthesis, structure, and optical properties of SiO2 @YAG:Ce core–shell optical nanoparticles for solid state lighting applications. YAG:Ce phosphor is a key part in white light emitting diodes (LEDs), with its main functionality being the generation of yellow light. Generated yellow light from phosphor will be combined with blue light, emitted from chip, resulting in the generation of white light. Generated light in LEDs will often be scattered by SiO2 nanoparticles. SiO2 nanoparticles are often distributed within the optical window, aiming for a more homogeneous light output. The main idea in this research is to combine these functionalities in one core–shell particle, with its core being SiO2 and its shell being phosphor. In this study core–shell nanoparticles with different Ce3+ concentrations were synthesized by a sol–gel method. Synthesized nanoparticles were characterized by X-ray diffraction (XRD), small angle X-ray scattering (SAXS) analysis, high resolution transmission electron macroscopy (HRTEM), Fourier transform infrared (FTIR), and photoluminescence spectroscopy. Luminescence characteristics of SiO2 @YAG:Ce core–shell particles were compared with that of SiO2 /YAG:Ce mixture composite, which is now used in commercial LEDs. Obtained results showed that core–shell nanoparticles have comparatively much better optical properties, compared to SiO2 /YAG:Ce mixture composite and can therefore be potentially used in LEDs.@en

In this paper, degradation mechanisms of optical materials, used in the light emitting diode (LED)-based products, are reviewed. The LED lighting is one of the fastest technology shifts in human history. Lighting accounts for almost 20% of the global electrical energy use, inferring that replacement of traditional lighting sources with LEDs with higher efficiencies will have major positive implications for the global energy consumption. Organic optical materials are key components in LEDs in the sense that they control the functionality of the device and they have decisive effects on the durability and reliability of LEDs. This paper aims at describing the influences of chemical structure and service conditions on the degradation mechanisms of organic optical materials in LEDs which lead to the lumen depreciation, discolouration, and colour shift of the LED light output. The contributions of different degradation mechanisms of optical and package materials in LED-based products to the lumen depreciation and colour shift are methodically reviewed.

@en

This paper aims at studying microstructure and mechanical properties of spark plasma sintered (SPSed) Stellite®-6 cobalt-based superalloy. SPS is a sintering technique, based on a relatively fast resistance heating using a pulsed current. Fast sintering process, associated with minimum grain growth, results in excellent mechanical properties. Samples were sintered at temperatures ranging from 950 to 1100 °C. Microstructure of samples were studied using scanning electron microscope (SEM), energy-dispersive X-ray spectroscope (EDS), X-Ray diffraction (XRD), and optical microscope. Hardness, impact test, as well as room and high temperature compression tests were used to evaluate the effects of sintering temperature and duration on the mechanical properties of SPSed samples. Results show that optimum mechanical properties can be obtained after sintering at 1050 °C for 10 min. The correlation between sintering parameters, microstructure, and mechanical properties are discussed.

@en

Isothermal ageing of Al–Mg–Si alloys, stored at room temperature for more than 5 months, is associated with an unexpected significant increase in the overall electrical resistivity. This unexpected anomalous increase is not observed in alloys with shorter storage (natural ageing) times. This phenomenon is explained with a scenario, based on the evolution of the size distribution of Guinier–Preston (GP) zones during natural ageing and during subsequent artificial ageing. The proposed scenario can explain the contribution of natural ageing atomic clusters to this anomalous increase in the electrical resistivity. A physically based combined precipitation–electrical resistivity model, with the former being based on simultaneous nucleation-growth-coarsening reactions and the latter based on the Bragg scattering of electrons from atomic clusters, has been used to explain the electrical resistivity evolution. It is shown that the proposed model is capable of reproducing the experimental data in both short natural ageing (less than 5 months) and long natural ageing (more than 5 months) regimes.@en

This paper investigates the root cause of the formation of surface cracks on hot-rolled C-Mn constructional steel heavy plates. Cracks are rather evenly distributed over the surface in the form of colonies of cracks. Samples were cut from the heavy plate. The microstructure of samples in the as-cast and hot-rolled states were studied using optical and electron microscopes as well as energy dispersive X-ray spectroscopy (EDS). Results show that cracks are heavily oxidized. De-carburized areas are also seen alongside cracks. The crack tip is in the form of a deer-horn, indicating that crack branching has taken place during deformation. The crack initiation sites are V-shaped grooves on the surface of as-cast slabs. Correlations between microstructures, processing parameters, and crack formation are discussed.@en

This paper investigates the effects of carbon nanotubes (CNT) addition on the structure and mechanical properties of Ni ₃ Al-xB (0.0 < x < 1.5 at%) intermetallic compound. Ni ₃ Al-xB-1wt%CNT nanocomposite powders were first synthesized by mechanical alloying. Effects of CNT addition on the lattice strain and crystallite size of synthesized powders were investigated by means of X-ray diffraction (XRD) analysis. Scanning electron microscope (SEM) was used to study powder morphologies. Powders, synthesized by mechanical alloying, were then consolidated using spark plasma sintering (SPS), conducted at 950 °C under pressure 50 MPa. Microhardness and shear punch tests were employed to study the mechanical properties of sintered samples. Results show that CNT addition is accompanied by a decrease in crystallite size and a significant improvement of mechanical properties of Ni ₃ Al-xB (0.0 < x < 1.5 at%) intermetallic compounds.

@en

Lumen depreciation is one of the major failure modes in light-emitting diode (LED) systems. It originates from the degradation of the different components within the system, including the chip, the driver, and the optical materials (i.e., phosphorous layer). The kinetics of degradation in real-life applications is relatively slow, and in most cases, it takes several years to see an obvious deterioration of optical properties. A highly accelerated stress testing (HAST) setup and a methodology to extrapolate the results to real applications are therefore needed to test the reliability of LED package and lens materials. Employing HAST concept in LED industry is inevitable due to the necessity of assessing the reliability of new products in a short period of time. This chapter aims at briefly explaining the degradation mechanism of optical components in LED package and how they contribute to the lumen depreciation of the LED package. The concept of HAST and the way the reliability of LED packages can be assessed will also be explained.@en

Degradation mechanisms of silicone plates under harsh environment conditions are studied in this investigation. Environmental degradation of silicone free form, used as secondary optics in Light Emitting Diode LED lighting lamps and luminaires or any other applications requiring high quality optics being used, has negative implications for the optical performance. Degradation of silicone plates in harsh environment conditions was studied in salt bath and swimming water environments, using different light radiation and temperatures. Samples were exposed to harsh environment conditions for up to 4 months. Optical and chemical characteristics of exposed plates were studied using an Fourier transform infrared- attenuated total reflection FTIR-ATR spectrometer, an integrated sphere, and a Lambda 950 Ultraviolet-Visible UV-VIS spectrophotometer. Results show that 100 °C salt bath exposure had the most severe degrading effect on the optical characteristic of silicone plates. Increasing exposure time in the salt bath at that high temperature is associated with a significant deterioration of both optical (i.e., light transmission and relative radiant power value) and mechanical properties of silicone samples. On the contrary, silicone plates showed a great degree of stability against light exposure (UV at 360 nm and blue light at 450 nm)@en

Reduction of intensity of light output is one of the most common degradation modes in light-emitting diode (LED) systems. It starts from the failure of the various components in the system, including the chip, the driver, and optical components (i.e. phosphorous layer). The kinetics of degradation in real life applications is relatively slow and in most cases it takes several years to see an obvious deterioration of optical properties. Highly Accelerated Stress Testing (HAST) set-up and a methodology to extrapolate the results to real time applications are therefore needed to test the reliability of LED packages and lens materials. Using HAST concept in LED industry is inevitable due to the necessity of assessing the reliability of new products in a short period of time. This paper aims at briefly clarifying the degradation mechanisms of optical components in LED packages and explaining how they contribute to the depreciation of light output of the LED systems. The concept of HAST and the way the reliability of LED packages can be evaluated will also be discussed.@en

A graphene monolayer has been successfully coated on one side of a bisphenol-A-polycarbonate (BPA-PC) plate, used as a substrate for remote phosphor applications in light-emitting diode (LED)-based products. Using a photoresist transferring method, graphene sheet has been coated on BPA-PC plates. The results show that this graphene monolayer significantly improves the lifetime and performance of LEDs mainly by protecting them against external degradation factors such as moisture and oxygen. Also, LED-based products composed of graphene-coated BPA-PC plates exhibit longer stability with comparatively less loss of luminous efficiency. This method has great potential to significantly improve the reliability of not only LED-based products but also many other microelectronics packaging and components, in which moisture and oxygen are the key causes of failures.@en

A methodology, based on accelerated degradation testing, is developed to predict the lifetime of remote phosphor plates used in solid-state lighting (SSL) applications. Both thermal stress and light intensity are used to accelerate degradation reaction in remote phosphor plates. A reliability model, based on the Eyring relationship, is also developed in which both acceleration factors (light intensity and temperature) are incorporated. Results show that the developed methodology leads to a significant decay of the luminous flux, correlated colour temperature (CCT) and chromatic properties of phosphor plates within a practically reasonable period of time. The combination of developed acceleration testing and a generalized Eyring equation-based reliability model is a very promising methodology which can be applied in the SSL industry.@en

In this paper, progresses of color maintenance, also known as color shift, in solid-state lighting (SSL) systems are thoroughly reviewed. First, color shift is introduced and a few examples are given from different real-life industrial conditions. Different degradation mechanisms in different parts of the system are also explained. Different materials used as lenses/encapsulants in light-emitting diode (LED)-based products are introduced and their contributions to color shift are discussed. Efforts put into standardization, characterizing, and predicting lumen maintenance are also briefly reviewed in this paper.

@en