Cement-based columns in combination with geosynthetic reinforcement is a well-established soft ground improvement technique to enhance embankment stability. This paper aims to present a finite-element (FE) study based on a case history of a geosynthetic-reinforced column-supported (GRCS) embankment over soft soil. In this study, the columns are simulated with an advanced Concrete model to simulate the development of possible cracking and induced strain-softening. Numerical results are compared against published centrifuge tests, giving confidence to the established FE model with the Concrete model. New insights into the progressive failure mechanisms of GRCS embankments over soft soil are then discussed by examining the stress paths, internal forces, and cracks, as well as the plastic failure zones of columns. In addition, the role of columns and geosynthetics on the progressive failure mechanisms (failure loads and sequences) is also examined by an extensive parametric study. The results suggest that provided the optimization of compressive and tensile forces in the columns combined with the tensile stiffness of the geosynthetics is put in place, more columns can be mobilized to resist global sliding failure and to improve the bearing capacity of GRCS embankments.

This paper presents a stability study on the collapse mechanisms of a plane-strain tunnel face in c-ϕ soils using the upper bound finite element method with rigid translatory moving elements (UBFELA-RTME) and nonlinear programming technique. Practical considerations are given to the unlined length influence behind the tunnel face. An advanced mesh adaptive updating strategy is adopted, aiming to improve the computational efficiency, the accuracy of upper-bound solutions, as well as the produced collapse mechanisms. The unlined length influence on the face stability and collapse mechanism of the tunnel face are determined with various combinations of tunnel depth ratios, soil friction angles, and dilatancy angles. Using the UBFELA-RTME with the Davis's approach and a mesh adapting strategy, the non-associated plasticity flow rule can be well approximated. The developed technique was validated against different numerical methods, and it is concluded that the tunnel face stability can be improved by increasing soil friction and dilatancy angles, and yet weakens as the unlined length increases where a mesh-liked collapse zone gradually appears on the tunnel vault top. It gradually evolves to a global collapse failure till the ground surface. The findings contribute to a better understanding of the ground surface failure under the unlined support length influence in tunnel construction.