In photographs of evidence in forensic investigations, physical size references (e.g., rulers or stickers) are often placed next to a trace to allow us to take measurements from photos. However, this is laborious and introduces contamination risks. The FreeRef-1 system is a contactless size reference system that allows us to take forensic photographs without having to be close to the evidence, and allows photographing under large angles without losing accuracy. The FreeRef-1 system performance was assessed using technical verification tests, inter-observer checks and user tests with forensic professionals. The results show that the measurements taken with photos using the FreeRef-1 system were at least as accurate as those taken using conventional techniques. Furthermore, with the FreeRef-1 system, even photographs taken under strongly oblique angles provided accurate measurements. The results suggest that the FreeRef-1 system will facilitate photographing evidence even in hard-to-reach places, such as under tables and on walls and ceilings, while increasing the accuracy and speed.@en

Purpose: Smothering to death is most often done with a soft cover, such as a pillow. This is one of the hardest to diagnose causes of death. Knowing more about how people perform such an act and whether there is any correlation between perpetrator characteristics and smothering approaches may help in solving criminal cases involving smothering. Methods: A total of 181 visitors of a music festival were asked to smother a dummy with a pillow. Each participant provided their age, gender, dominant hand, length, weight, alcohol use (last 24 h) and drug use (last 24 h) in a questionnaire. Forces applied by the participant on the dummy head with the pillow were continuously measured and the smothering modus operandi (described by aspects such as the placement of the hands, feet and body weight) was obtained from video recordings. Results: Participants with high alcohol consumption provided higher smothering forces. Increases were also found for taller participants and those who had used drugs. Smothering seemed most effective when placing both hands on the pillow on the head and when placing the center of mass as much directly above the dummy head as possible. A stable, central stance also benefitted smothering effectiveness. Conclusion: Forensic case work may potentially benefit from these results in the future by linking the current results to the location of hand and finger marks on a pillow.

@en

During ultrasound-guided percutaneous interventions, needle localization can be a challenge. To increase needle visibility, enhancements of both the imaging methods and the needle surface properties have been investigated. However, a methodical approach to compare potential solutions is currently unavailable. The work described here involves automated image acquisition, analysis and reporting techniques to collect large amounts of data efficiently, delineate relevant factors and communicate effects. Data processing included filtering, line fitting and image intensity analysis steps. Foreground and background image samples were used to compute a contrast-to-noise ratio or a signal ratio. The approach was evaluated in a comparative study of commercially available and custom-made needles. Varied parameters included needle material, diameter and surface roughness. The shafts with kerfed patterns and the trocar and chiba tips performed best. The approach enabled an intuitive polar depiction of needle visibility in ultrasound images for a large range of insertion angles.

@en

Operating Room (OR) scheduling is crucial to allow efficient use of ORs. Currently, the predicted durations of surgical procedures are unreliable and the OR schedulers have to follow the progress of the procedures in order to update the daily planning accordingly. The OR schedulers often acquire the needed information through verbal communication with the OR staff, which causes undesired interruptions of the surgical process. The aim of this study was to develop a system that predicts in real-time the remaining procedure duration and to test this prediction system for reliability and usability in an OR. The prediction system was based on the activation pattern of one single piece of equipment, the electrosurgical device. The prediction system was tested during 21 laparoscopic cholecystectomies, in which the activation of the electrosurgical device was recorded and processed in real-time using pattern recognition methods. The remaining surgical procedure duration was estimated and the optimal timing to prepare the next patient for surgery was communicated to the OR staff. The mean absolute error was smaller for the prediction system (14 min) than for the OR staff (19 min). The OR staff doubted whether the prediction system could take all relevant factors into account but were positive about its potential to shorten waiting times for patients. The prediction system is a promising tool to automatically and objectively predict the remaining procedure duration, and thereby achieve optimal OR scheduling and streamline the patient flow from the nursing department to the OR.@en

Efficiency in the Operating Room (OR) is a topic of growing interest. Planning of care is a crucial element to ensure optimal use of the ORs. Currently, OR scheduling is considered as a complex task based on predictions of surgery duration. The latter are often based on average times, but turn out to be inaccurate in practice because of various factors (such as complexity, patient's characteristics, unexpected events, etc). The aim of this study is to develop a prediction system that estimates in real-time the remaining duration of a surgical procedure. The prediction system was based on monitoring the progress of a procedure by recording the activation of a single piece of equipment in the OR, the electrosurgical device. Support Vector Machines was then used as a classifier to predict the remaining surgical procedure duration and thereby the optimal timing to start preparing the next patient for surgery. The classifier was trained with data on the activation of the electrosurgical device during 55 laparoscopic cholecystectomies. The performance tests showed a mean error rate about 0.2, which means that about 80% of the procedures were classified correctly. The real-time prediction system is a promising tool to improve OR planning and decrease unnecessary patients' waiting times.

@en