Turboprop aircraft should be improved as they are more environmentally friendly aircraft compared to turbojet aircraft but noise and vibration are often too high for passengers. A simple and uncomplicated way to carry out experiments is using a demonstrator. To determine whether the demonstrator represents the reality, it must be validated. In this project, real flights were first conducted in a turboprop aircraft. During two 70-minute flights, 94 subjects answered questions about symptoms, mood or comfort levels related to noise and vibration, among other things. In the next step, investigations will be carried out in the demonstrator under the same conditions as the real flights. Both results will be compared with each other. If the data from the demonstrator corresponds to that of the real flights, the demonstrator is considered to have been successfully validated. The requirement for this is that the demonstrator data lies within the confidence intervals of the results from the real flights. The aim is to validate a full-scale on-ground demonstrator of a regional turboprop aircraft cabin that will be used for multiple tests like subject tests and comfort evaluation, composite materials and structures, systems and energy consumption.

@en

Many new future sustainable aircraft concepts have (electric) propeller propulsion. However, the noise and vibration generated by propeller propulsion might create discomfort for passengers. In the Clean Sky 2 project ‘ComfDemo’, all factors influencing comfort and discomfort are studied, with the aim to improve comfort experience for eco airplanes. The results show that noise, vibration and seat are the most mentioned factors influencing discomfort. The flights without passengers showed different noise characteristics, which makes test flights with passengers inevitable. Noise certainly needs attention, but anthropometrics as well as for instance elbow-elbow width is greater than the 18” seat width for many passengers.@en

Turboprop aircraft are a useful alternative to reduce CO2 emissions, but they have a higher noise and vibration level compared to turbojets. We investigated how passengers perceived noise and vibration during two turboprop flights in an ATR72.In general, noise as assessed as slightly loud and slightly annoying, but became less noisy and more comfortable over time. Subjects evaluated the vibration as rather comfortable, but the perception of vibration varied for different body areas. Discomfort of vibration decreased. If noise sensitivity is added to these analyses, changes over time largely disappeared showing the complex interaction between characteristics of the person and the environment. In summary, the rather negative evaluation of noise and vibration could be the factors why people decide not to fly with turboprop aircrafts. The development of turboprop aircraft with less noise and vibration remains important so that this more sustainable aircraft type is competitive. @en

Comfort is an important factor for passengers in the selection of airlines, and electric propeller aircraft will be an important element of future sustainable aviation. In this paper, we studied the order of importance of different (dis)comfort factors regarding traveling with propeller aircraft. Two experiments were conducted, one was a simulation flight on the ground with 33 participants and the other were two real flights with 97 participants. All participants were asked to rank the importance of different (dis)comfort factors in different phases of flights. Results indicated that though there are differences between the simulation and the real flights, noise, vibration and the seat are among the most important factors regarding discomfort, and space, lighting, temperature and seat are the most important factors of comfort. The results are different to those reported from previous studies on travelling by jet, where anthropometry is the most important factor. This finding suggests a difference in passenger perception between travelling by propeller propulsion and jet engines, and casts new requirements on the aircraft interior and service design for future sustainable aviation. @en

Various aspects related to comfort are described in this special issue. Some papers are focused on the environment, like smell, temperature, light, acoustics, space and some on an artefact touching the human, like the floor angle, the seat, a bed and light. However, in this special issue also topics like modelling and behavior get more attention.

@en

BACKGROUND: Selecting the most suitable questionnaire(s) in comfort research for product design is always a challenge, even for experienced researchers. OBJECTIVE: The objective of this research is to create a list of Preferred Comfort Questionnaires (PCQ) for product design to help researchers in the selection of questionnaires for comfort research. METHODS: Fifteen questionnaires that are often used in comfort research for product design were selected as candidate questionnaires. During the Second International Comfort Congress (ICC 2019), 55 researchers and practitioners working in the field of comfort joined together in a workshop to rate these questionnaires individually as well as rank them in groups based on their experience. The criteria of rating and ranking included easiness to answer, easiness for data interpretation, time needed to complete, the need for prior training, as well as mapping the applicable design phases and field of application. RESULTS: The elicited responses related to each questionnaire were analyzed. For comfort research in five proposed application fields and four design phases, the preferred questionnaires were highlighted and categorized into four categories: preferred questionnaire, suitable for less prior training, suitable for fast completion and generally applicable, which led to a list of PCQ for product design. CONCLUSION: We expect that the PCQ list can be used as a useful instrument to help researchers in selecting questionnaires for comfort research in product design.

@en

This paper gives an overview of the relevance of the comfort concept, its definitions, boundary conditions, and stakeholders. Current comfort theories are presented and reflected on, both in their applicability and testing methodology. Questionnaires commonly used to study comfort and discomfort are also reviewed. An example of a comfort lab is introduced in its functionality and tools, which can be useful as a benchmark for others studying comfort.

@en