The hexagonal cell topology of planar SiC VDMOSFETs with varied JFET width (LJFET) are designed and manufactured in this study. L JFET=1.4μ m has the best HF-FOM (R on × Cgd) and HF-FOM (R on × Qgd) by comparing the dynamic and static parameters of each design. Besides, the UIS reliability and failure mechanism for series designs are investigated by experiment and TCAD simulation. The results show that the high temperature is generated by energy dissipation during avalanche and it drives the parasitic BJT conduction, causing Ids out of control and instantaneous heat concentration in a very short time. The extremely high temperature causes internal cracking of the material and metal melting, resulting in gate-source short circuit and device damage. It would provide suggestions for device design and reliability consideration.@en

To investigate the unclamped inductive switch (UIS) characteristics, 1200 V silicon carbide (SiC) planar MOSFETs with four cell topologies of linear, current sharing linear, square, and hexagon are designed and manufactured. The experimental platform was built and tested. The results show that the single pulse avalanche energy density of the linear cell topology is 1.69 times higher than that of the square and 1.49 times that of the hexagon. Further, the UIS process is simulated by using physical simulation, which shows that the avalanche energy was concentrated near the corner of the P-base region in the UIS mode. From this, the avalanche energy distribution differences of the four cell topologies were analyzed and compared. A theoretical model of avalanche heating per unit area is proposed, which shows that the avalanche energy density is inversely proportional to the proportion of avalanche energy concentration region. This study may contribute to the cell topology design of SiC MOSFETs under the application scenario with high avalanche reliability requirements.@en