This article proposes a power-efficient highly linear capacitor-array-based digital-to-time converter (DTC) using a charge redistribution constant-slope approach. A fringe-capacitor-based digital-to-analog converter (C-DAC) array is used to regulate the starting supply voltage of the constant discharging slope fed to a fixed-threshold comparator. The DTC operation mechanism is analyzed and design tradeoffs are investigated. The proposed DTC consumes merely 31 μW from a 1-V supply when clocked at 40 MHz, while achieving a fine resolution of 148 fs over a 9-bit range. The measured differential nonlinearity (DNL) and integral nonlinearity (INL) are 0.96/1.07 LSB.

This paper proposes an ultra-low-voltage (ULV) fractional-N all-digital PLL (ADPLL) powered from a single 0.5-V supply. While its digitally controlled oscillator (DCO) runs directly at 0.5 V, an internal switched-capacitor dc-dc converter ``doubles'' the supply voltage to all the digital circuitry and particularly regulates the time-to-digital converter (TDC) supply to stabilize its resolution, thus maintaining fixed in-band phase noise (PN) across process, voltage, and temperature (PVT). The ADPLL supports a two-point modulation and forms a Bluetooth low-energy (BLE) transmitter realized in 28-nm CMOS. It maintains in-band PN of -106 dBc/Hz [figure of merit (FoM) of -239.2 dB] and rms jitter of 0.86 ps while dissipating only 1.6 mW at 40-MHz reference. The power consumption reduces to 0.8 mW during the BLE transmission when the DCO switches to open loop.

This paper presents a millimeter-wave (mmW) frequency generation stage aimed at minimizing phase noise (PN) via waveform shaping and harmonic extraction while suppressing flicker noise upconversion via proper harmonic terminations. A 2nd-harmonic resonance is assisted by a proposed embedded decoupling capacitor inside a transformer for explicit common-mode current return path. Class-F operation with 3rd-harmonic boosting and extraction techniques allow maintaining high quality factor of a 10-GHz tank at the 30-GHz frequency generation. We further propose a comprehensive quantitative analysis method of flicker noise upconversion mechanism exploiting latest insights into the flicker noise mechanisms in nanoscale short-channel transistors, and it is numerically verified against foundry models. The proposed 27.3- to 31.2-GHz oscillator is implemented in TSMC 28-nm CMOS. It achieves PN of -106 dBc/Hz at 1-MHz offset and figure-of-merit (FoM) of -184 dBc/Hz at 27.3 GHz. Its flicker phase-noise (1/f³) corner of 120 kHz is an order-of-magnitude better than currently achievable at mmW.

This paper presents a mmW frequency generation stage aimed at minimizing phase noise via waveform shaping and harmonic extraction while suppressing flicker noise upconversion via proper harmonic terminations. A second-harmonic tank resonance is assisted by a proposed embedded decoupling capacitor inside a transformer for shortest and well controlled common-mode current return path. Class-F operation with third-harmonic boosting and extraction techniques allow maintaining high quality factor of a 10 GHz tank at the 30 GHz frequency generation while providing implicit divide-by-3 functionality. The proposed 27.3-31.2 GHz oscillator is implemented in 28-nm CMOS. It achieves phase noise of-106 dBc/Hz at 1-MHz offset and figure-of-merit (FoM) of -184 dB at 27.3GHz. Its flicker phase-noise (1/f³) corner of 120 kHz is an order-of-magnitude better than currently achievable at mmW.