Microalgae-based wastewater treatment is an alternative to physico-chemical and bacteria-based technologies. Microalgae-based wastewater treatment showed enormous potential, not only exhibiting excellent pollutant removal efficiencies but also unlimited opportunities for resource recovery. Despite its promising future, the question of selecting autotrophy or heterotrophy regimes for optimal organic pollutant removal remains. This current work juxtaposes the performance of autotrophic and heterotrophic cultures in treating organic-rich wastewater to shed light on the unsolved puzzle. This review paper details the autotrophy and heterotrophy growth regimes for microalgae, as well as highlights the source of organic-rich wastewater and its characteristics. A clear comparison between both regimes was then discussed with recent references. Heterotrophic cultures showed better parameter removal performances, especially carbon-related and N-related compounds, while the removal of P-related compounds is considerably similar. Heterotrophic regimes also resulted in higher biomass yield with higher P content as compared to autotrophy. Despite their superiority, heterotrophic regimes continuously require additional carbon sources, posing a cost-related limitation. In contrast, autotrophic culture has an added value of carbon sequestration, making it beneficial for climate mitigation and lowering operational costs. Future research should concentrate on techno-economic and cost-benefit analyses to further refine the currently discussed topic.

Aquaculture wastewater treatment not only assists in alleviating the scarcity of clean water for daily usage and environmental pollution, but also generates valuable byproducts. This paper aims to review the generation of wastewater from the aquaculture sector, its characteristics, and available treatment technologies, while comprehensively discussing the adoption of a biocircular economy approach through waste valorization. With rich nutrients, such as nitrogenous compounds, and the presence of phosphorus in the aquaculture effluent, these aspects could be explored and valorized into biofertilizers, broadening their application in aquaponics and hydroponics, as well as in algae and daphnid cultivation. Biofertilizer can also be used in agriculture because it contains essential elements needed by plants. Thus, methods of converting nutrients into biofertilizers in terms of sludge recovery can be accomplished via anaerobic and aerobic digestion, drying, composting, and vermicomposting. Moving forward, aquaculture effluent recovery is addressed under the biocircular economy by re-engaging aquaculture wastewater effluents into the production cycle. The enhancement of aquaculture effluents and biomass for uses such as aquaponics, hydroponics, algae cultivation, daphnid co-cultivation, and biofertilizers presents valuable opportunities for nutrient recovery while ensuring that non-toxic wastewater can be safely discharged into external water bodies. This approach has the potential to revolutionize wastewater treatment in aquaculture, shifting the economic model of wastewater management from a linear system to a circular, more sustainable one.

Biocoagulants have gained attention as an alternative to chemical coagulants in water and wastewater treatment due to their ability to remove pollutant parameters such as turbidity, suspended solids, color, and organic compounds. Plant-based biocoagulants are currently the most promising due to their abundant availability and reliable performance. A proper preparation of plant-based biocoagulants is required to ensure the active compounds from the plants can be extracted. Plant raw materials are prepared into biocoagulants using drying and grinding, extraction, and purification. In mechanical preparation, drying and grinding exhibit great influence on the performance of plant-based biocoagulants due to the removal of moisture and higher contact with the carrier medium during dissolution. A smaller biocoagulant's size resulted in up to 78 % higher removal of turbidity. In chemical preparation, the oil needs to be removed before extracting the active ingredients to avoid low active compound extraction yields. The defatting of Moringa oleifera seeds showed an 18 % higher protein content. Salt and alcohol extractions were mentioned as superior extraction methods to obtain carbohydrate and protein from plant-based biocoagulants compared to water extraction, with up to a 5 % increment in turbidity removal. Preparation and pretreatment protocols have a great influence on the properties and performance of plant-based biocoagulants. Further extension of research on plant-based biocoagulants should address the problems in the initial characterization of plant material, standard pretreatment and preparation protocols, and real-scale application of plant-based biocoagulants.