The simplicity of encoding a qubit in the state of a single electron spin and the potential for their integration into industry-standard microchips continue to drive the field of semiconductor-based quantum computing. After a series of key first-principles demonstrations validating universal gate operations, initialization and readout, three-qubit algorithms have already been realized with silicon-based quantum dots in past years. Devices containing more qubits have become available since then but experiments have not gone beyond meeting the DiVincenzo criteria. In this work, we fully exploit the capacity of a spin-qubit array and implement a six-qubit quantum circuit, the largest utilizing semiconductor quantum technology. By programming the quantum processor, we execute quantum circuits across all permutations of three, four, five, and six neighboring qubits, demonstrating successful programmable multi-qubit operation throughout the array. Using an error model that incorporates quasi-static noise allows us to qualitatively explain some key trends in our experimental results and highlight the necessity to minimize idling times through simultaneous operations, extending dephasing times, and consistently improving state preparation and measurement fidelities.

Solid-state qubits are sensitive to their microscopic environment, causing the qubit properties to fluctuate on a wide range of timescales. The sub-Hz end of the spectrum is usually dealt with by repeated background calibrations, which bring considerable overhead. It is thus important to characterize and understand the low-frequency variations of the relevant qubit characteristics. In this study, we investigate the stability of spin qubit frequencies in the Si/SiGe quantum dot platform. We find that the calibrated qubit frequencies of a six-qubit device vary by up to ±100 MHz while performing a variety of experiments over a span of 912 days. These variations are sensitive to the precise voltage settings of the gate electrodes, however when these are kept constant to within 15 µV, the qubit frequencies vary by less than ±7 MHz over periods up to 36 days. During overnight scans, the qubit frequencies of ten qubits across two different devices show a standard deviation below 200 kHz within a 1-hour time window. The qubit frequency noise spectral density shows roughly a 1/f trend above 10⁻⁴ Hz and, strikingly, a steeper trend at even lower frequencies.

Micromagnet-enabled electric-dipole spin resonance (EDSR) is an established method for high-fidelity single-spin control in silicon, although so far experiments have been restricted to one-dimensional arrays. In contrast, qubit control based on hopping spins has recently emerged as a compelling alternative, with high-fidelity baseband control realized in sparse two-dimensional hole arrays in germanium. In this work, we commission a ²⁸Si/SiGe 2 × 2 quantum dot array both as a four-qubit device using EDSR and as a two-qubit device using baseband hopping control. We establish a lower bound on the fidelity of the hopping gate of 99.50(6)%, which is similar to the average fidelity of the resonant gate. The hopping gate also circumvents the transient pulse-induced resonance shift from heating observed during EDSR operation. To motivate hopping spins as an attractive means of scaling silicon spin-qubit arrays, we propose an extensible nanomagnet design that enables engineered baseband control of large spin arrays.

As spin-based quantum processors grow in size and complexity, maintaining high fidelities and minimizing crosstalk will be essential for the successful implementation of quantum algorithms and error-correction protocols. In particular, recent experiments have highlighted pernicious transient qubit frequency shifts associated with microwave qubit driving. Work-Arounds for small devices, including prepulsing with an off-resonant microwave burst to bring a device to a steady state, wait times prior to measurement, and qubit-specific calibrations all bode ill for device scalability. Here, we make substantial progress in understanding and overcoming this effect. We report a surprising nonmonotonic relation between mixing chamber temperature and spin Larmor frequency which is consistent with observed frequency shifts induced by microwave and baseband control signals. We find that purposefully operating the device at 200 mK greatly suppresses the adverse heating effect while not compromising qubit coherence or single-qubit fidelity benchmarks. Furthermore, systematic non-Markovian crosstalk is greatly reduced. Our results provide a straightforward means of improving the quality of multispin control while simplifying calibration procedures for future spin-based quantum processors.