The Catterline Bay, located in North East Scotland, is prone to erosion processes. Using Terrestrial Laser Scanning (TLS) two point clouds were obtained in 2019 and 2022 from this area of ca. 0.2 km². Here, a methodology was proposed and tested to assess how erosion processes can be monitored from high resolution point clouds in small study areas. Filtering of ground points from the point clouds was done using a full 3D approach. The local dimensionality on multiple scales was used to generate features for the classification, for which Linear Discriminant Analysis was used. The algorithm was able to precisely separate non ground points from ground points with a precision on test data sets of 94.7% on ground points and 94.3% on non-ground points.

The ground points provided a basis for the Digital Terrain Model (DTM) raster. Several geomorphological quantities could be derived from this DTM. Next to these quantities, also information about vegetation height and 3D change detection using the Multi-scale Model to Model Cloud Comparison (M3C2) was extracted.

From a combination of the Terrain Ruggedness Index (TRI), change detection using the Multiscale Model to Model Cloud Comparison (M3C2) technique and photos, erosion zones were derived. Also stable, non-erosion, zones were identified. Various statistics from the geomorphological quantities were analysed for both zone types. Erosion zones have clear edges of high TRI values, indicating the scarps of landslides. The erosion zones also contain groups of negative M3C2 distances, indicating depletion zones. Not only the TRI and M3C2 distances have significantly different statistics for erosion and non-erosion zones, also the slope is steeper in these zones and the Topographic Wetness Index is smaller. The mean slope for erosion zones is 39.3° compared to 30.9° for non-erosion zones. To capture the behaviour of the TRI in the defined zones, p_TRI was introduced which gives a rate of how many cells have a high TRI value in a defined zone. The p_TRI, the rate of TRI values above 0.06 m, is more than 4 times larger for erosion zones (0.17) than for non-erosion zones (0.04).

Changes in vegetation height could be linked to locations of implemented Nature Based Solutions (NBS). The results were in agreement with changes in NDVI, which were calculated from optical satellite imagery.

In conclusion, the new methodology has great potential to identify erosion zones in complex sloped terrain and monitor changes in vegetation.

Eutrophication processes in coastal waters are becoming more prominent as a result of high nutrient discharges from intensive agriculture and increased urban waste. These processes can be devastating for local ecosystems and lead to dissolved oxygen depletion, which applies considerable stress on aquatic organisms. For ecosystems to preserve their status, stop and reverse the negative effects of eutrophication, regular estimation of corresponding indicators has to take place. In this direction, mostly process-driven models have been used, but the presented project argues that freely available remote sensing data can also provide useful insights for the oxygen saturation of the water. The proposed methodology uses Sea Surface Temperature and Chlorophyll-a estimations from AQUA and ENVISAT satellite sensors for the period 2003-2011 to predict the dissolved oxygen content in the Dutch coastal waters. It does so by implementing various Machine Learning models, namely Random Forest, Artificial Neural Network and Gradient Boosting Regressors, with the latter demonstrating the best results. After extensive data pre-processing, the results show that dissolved oxygen can be predicted with an average Root-Mean-Squared error of 0.8 g/m3. Important steps towards a lower error include the use of gap-filled variables and their decomposition into their temporal components as inputs for the model. Furthermore, the effect of the Sea Surface Temperature on the dissolved oxygen is documented through its contribution in the estimation of the latter’s seasonal variability, while the estimation of the maximum dissolved oxygen values is attributed to Chlorophyll-a. Further feature engineering and model development can possibly improve the estimation of the minimum dissolved oxygen values in the coast and the overall prediction in more complex intertidal areas, like the Wadden Sea.