Print Email Facebook Twitter Residual ultimate strength of seamless metallic pipelines under a bending moment-a numerical investigation Title Residual ultimate strength of seamless metallic pipelines under a bending moment-a numerical investigation Author Cai, J. (TU Delft Transport Engineering and Logistics) Jiang, X. (TU Delft Transport Engineering and Logistics) Lodewijks, G. (University of New South Wales) Pei, Zhiyong (Wuhan University of Technology) Wu, Weiguo (Wuhan University of Technology) Date 2018 Abstract Numerical investigation is conducted in this paper on both intact and dented seamless metallic pipelines (diameter-to-thickness ratio D/t around 21), deploying nonlinear finite element method (FEM). A full numerical model is developed, capable of predicting the residual ultimate strength of pipes in terms of bending capacity (Mcr) and critical curvature (κcr). The simulation results are validated through test results by using the measured material properties and specimen geometry. An extensive parametric investigation is conducted on the influences of material anisotropy, initial imperfection, friction of the test set-up and dent parameters. It is found that the structural response is quite sensitive to the frictions that have been introduced by the test configuration. For a pipe with a considerable dent size, the effect of manufacturing induced initial imperfection is insignificant and can be neglected in the FEM simulation. The material yield stress in the pipe longitudinal direction dominates the bending capacity of structures. In the end, formulas are proposed to predict the residual ultimate strength of dented metallic pipes under pure bending moment, which can be used for practical purposes. A satisfying fit is obtained through the comparison between the formulas and FEM methods. Subject DentNonlinear FEMPipe experimentsPipelinesResidual ultimate strength To reference this document use: http://resolver.tudelft.nl/uuid:1a1d5bae-d97f-4fd3-833c-0c46b81f27dc DOI https://doi.org/10.1016/j.oceaneng.2018.06.044 Embargo date 2018-12-23 ISSN 0029-8018 Source Ocean Engineering, 164, 148-159 Bibliographical note Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public. Part of collection Institutional Repository Document type journal article Rights © 2018 J. Cai, X. Jiang, G. Lodewijks, Zhiyong Pei, Weiguo Wu Files PDF 1_s2.0_S0029801818310850_main.pdf 3.41 MB Close viewer /islandora/object/uuid:1a1d5bae-d97f-4fd3-833c-0c46b81f27dc/datastream/OBJ/view