Validation and Application of the Axisymmetric Analogue Technique on Rapid Hypersonic Shape Optimisation

Validation and Application of the Axisymmetric Analogue Technique on Rapid Hypersonic Shape Optimisation

Brchnelová, M. (Student TU Delft)
Mooij, E. (TU Delft Astrodynamics & Space Missions)

2022

The beginning of the conceptual design phase of (re)entry missions requires aerodynamic methods to reduce the initial design space. For this purpose, full computational fluid dynamics (CFD) simulations are unsuitable due to their computational requirements. Rapid hypersonic methods are thus often employed to approximate the heat flux and skin friction on the most critical parts of the (re)entry vehicle, such as the nose and the leading edges. However, the vast majority of these rapid methods only allow for a computation of these parameters at specific fixed locations and not on the other parts of the vehicle. One method that overcomes this is the axisymmetric analogue method, that determines the entire viscous flowfield from the inviscid flowfield solution. This method has typically been coupled to inviscid Euler simulations, but even Euler simulations can still consume a lot of computational time. In earlier research, it was shown that a reasonable accuracy can also be obtained if this method is coupled with the inviscid flowfield computed via the modified Newtonian technique. In this paper, we extend the validation and estimation of the uncertainties of this method using CFD, evaluate the respective corrections for thermal and chemical fluxes separately, and apply these corrections back to the solver. The biconic DART vehicle, partial optimisation of which was presented in the previous paper, is revisited, here optimising only four parameters instead of five as originally intended, as using five parameters resulted in an unfeasible geometry. We perform a full response surface methodology and analysis of variance accounting for the CFD corrections and examine the final optimised design also again with the Newtonian/axisymmetric code. The proposed methodology leads to a small underestimate of the heat fluxes, but is considered sufficient for the conceptual design phase.

http://resolver.tudelft.nl/uuid:9d1e4460-6cbe-4d67-877f-08f0d3901897

https://doi.org/10.2514/6.2022-0146

978-1-62410-631-6

AIAA SCITECH 2022 Forum

AIAA SCITECH 2022 Forum, 2022-01-03 → 2022-01-07, virtual event

AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022

Institutional Repository

conference paper

© 2022 M. Brchnelová, E. Mooij