Print Email Facebook Twitter Sustainability of bio-based plastics in a circular economy Title Sustainability of bio-based plastics in a circular economy Author Ritzen, L. (TU Delft Design for Sustainability) Contributor Balkenende, R. (promotor) Bakker, C.A. (promotor) Sprecher, B. (copromotor) Degree granting institution Delft University of Technology Date 2024-04-08 Abstract Plastics have become indispensable in modern life due to their versatility and affordability. However, their widespread use has resulted in far-reaching environmental damage, including the accumulation of plastic waste, fossil fuel depletion, and significant greenhouse gas emissions. Bio-based plastics have been proposed as a sustainable, circular solution to the environmental issues associated with plastics. However, bio-based plastics are not implicitly sustainable or circular. These aspects are influenced by how a plastic is produced and how it is recovered at end-of-life, implying that careful attention needs to be paid to material development and product design. This thesis explores the sustainability and circularity of bio-based plastics by looking at: how they are perceived by value chain actors, potential recovery pathways in a circular economy, and environmental impact. Although bio-based plastics have the potential to be sustainable, the emissions associated with producing them depend heavily on the biomass sourcing. At the same time, bio-based plastics are not de-facto biodegradable and thus efficient recovery at end-of-life needs to be guaranteed. Circular product design with bio-based plastics requires careful consideration of biomass sourcing and recovery. Although much information regarding these aspects is still missing, the research presented in this dissertation provides some guidelines for circular product design with bio-based plastics. In order to reduce environmental impacts, bio-based plastics should be produced with agricultural by-products or with biomass types with a high conversion efficiency. Biomass for bio-based plastics should be cultivated with minimal use of land, water, chemicals and fossil fuels. Environmental impacts can be reduced further by using renewable energy in the production process. Product designers should also consider what recovery pathway they want to target at end-of-life of a product. The plastic composition and product architecture need to reflect the targeted recovery pathway. To reference this document use: https://doi.org/10.4233/uuid:ca8b3b1e-41db-4481-a5ab-f4f6d446ed2d ISBN 978-94-6384-555-7 Embargo date 2024-04-08 Part of collection Institutional Repository Document type doctoral thesis Rights © 2024 L. Ritzen Files PDF LindaRitzen_Dissertation_ ... argins.pdf 5.09 MB Close viewer /islandora/object/uuid:ca8b3b1e-41db-4481-a5ab-f4f6d446ed2d/datastream/OBJ/view