Transient modelling of rotating and stationary cylindrical heat pipes

Transient modelling of rotating and stationary cylindrical heat pipes: An engineering model

Çelik, M. (TU Delft Energy Technology)
Paulussen, Geert (Tata Steel)
van Erp, Dennis (Tata Steel)
de Jong, W. (TU Delft Large Scale Energy Storage)
Boersma, B.J. (TU Delft Process and Energy; TU Delft Energy Technology)

Process and Energy

2018

Rotating wickless and stationary capillary cylindrical heat pipes are widely used heat transfer devices. Transient behavior of such heat pipes has been investigated numerically with computational fluid dynamics and lumped parameter models. In this paper, the advantages of both methods are combined into a novel engineering model that is low in computational cost but still accurate and rich in the details it provides. The model describes the interior dynamics of the heat pipe with a 2D representation of a cylindrical heat pipe. Liquid and vapor volumes are coarsely meshed in the axial direction. The cells are allowed to change in size in the radial direction during simulation. This allows for tracking the liquid/vapor interface without having to implement fine meshing. The model includes the equations for mass, momentum and energy and is applicable to both rotating and stationary heat pipes. The predictions of the model are validated with other experimental, numerical, and analytical works having an average deviation of less than 4%. The effects of various parameters on the system are explored. The presented model is suitable for the simulation of heat pipe systems in which both the level of detail and the computational cost are crucial factors.

Capillary heat pipe
Engineering model
Rotating heat pipe
Transient modelling

http://resolver.tudelft.nl/uuid:e63e0684-9ba0-456e-9f65-13c926e45abb

https://doi.org/10.3390/en11123458

1996-1073

Energies, 11 (12)

Institutional Repository

journal article

© 2018 M. Çelik, Geert Paulussen, Dennis van Erp, W. de Jong, B.J. Boersma