Print Email Facebook Twitter CFD-DEM study on agglomeration and spout-assisted fluidization of cohesive particles Title CFD-DEM study on agglomeration and spout-assisted fluidization of cohesive particles Author Zou, Yi (Southeast University – Monash University Joint Research Institute) Zou, Ruiping (Monash University) Wu, Yongli (TU Delft Resources & Recycling) Date 2024 Abstract The agglomeration of cohesive particles can deteriorate fluidization quality and cause the defluidization of a bed, which is a common issue found in the applications of fluidized beds. This study aims to gain a better understanding of particle cohesion on agglomeration/fluidization behaviors and the effective methods for achieving a better fluidization quality, through numerical simulations based on the coupled approach of computational fluid dynamics and discrete element method (CFD-DEM). The effects of particle cohesion, gas velocities or flow conditions, and the bed geometry on the agglomeration and fluidization behaviors are analyzed. It is shown that the increase of particle cohesion can lead to deteriorated particle mixing, significant agglomeration of particles, and defluidization of the bed; the agglomeration-induced defluidization of highly cohesive particles is difficult to mitigate in a conventional flat-bottom fluidized bed. As large-sized agglomerates are more frequently found in the bottom of the bed, the spouted gas flow is then utilized and demonstrated to be effective in assisting the deagglomeration and fluidization of highly cohesive particles. Through the comparison of various spouted beds and spouted fluidized beds, the effective design of the bed bottom is identified for achieving a higher fluidization quality. Corresponding mechanisms underlying spout-assisted deagglomeration and fluidization are found to be much related to not only the enhanced particle-fluid but also particle-wall interactions in the confined space of a conical bed bottom, thus explaining the effectiveness and the importance of the bottom conical geometry of spouted beds. The obtained findings may help to understand the agglomeration-induced defluidization of fluidized beds and assist the fluidization of highly cohesive particles by the effective design of spouted beds. Subject AgglomerationCFD-DEMCohesive particlesFluidizationSpouted bed To reference this document use: http://resolver.tudelft.nl/uuid:3dcfb0ec-d106-4134-851f-c8d935054f53 DOI https://doi.org/10.1016/j.powtec.2024.119512 ISSN 0032-5910 Source Powder Technology, 436 Part of collection Institutional Repository Document type journal article Rights © 2024 Yi Zou, Ruiping Zou, Yongli Wu Files PDF 1-s2.0-S0032591024001542-main.pdf 6.08 MB Close viewer /islandora/object/uuid:3dcfb0ec-d106-4134-851f-c8d935054f53/datastream/OBJ/view