GOCE gradiometer: Estimation of biases and scale factors of all six individual accelerometers by precise orbit determination

GOCE gradiometer: Estimation of biases and scale factors of all six individual accelerometers by precise orbit determination

Visser, P.N.A.M.

Aerospace Engineering

Astrodynamics & Space Missions

2008-06-03

A method has been implemented and tested for estimating bias and scale factor parameters for all six individual accelerometers that will fly on-board of GOCE and together form the so-called gradiometer. The method is based on inclusion of the individual accelerometer observations in precise orbit determinations, opposed to the baseline method where so-called common-mode accelerometer observations are used. The method was tested using simulated data from a detailed GOCE system simulator. It was found that the observations taken by individual accelerometers need to be corrected for (1) local satellite gravity gradient (SGG), and (2) rotational terms caused by centrifugal and angular accelerations, due to the fact that they are not located in the satellite’s center of mass. For these corrections, use is made of a reference gravity field model. In addition, the rotational terms are derived from on-board star tracker observations. With a perfect a priori gravity field model and with the estimation of not only accelerometer biases but also accelerometer drifts, scale factors can be determined with an accuracy and stability better than 0.01 for two of the three axes of each accelerometer, the exception being the axis pointing along the long axis of the satellite (more or less coinciding with the flight direction) for which the scale factor estimates are unreliable. This axis coincides with the axis of drag-free control, which results in a small variance of the signal to be calibrated and thus an inaccurate determination of its scale factor in the presence of relatively large (colored) accelerometer observation errors. In the presence of gravity field model errors, it was found that still an accuracy and stability of about 0.015 can be obtained for the accelerometer scale factors by simultaneously estimating empirical accelerations.

Accelerometer
Accelerometer drift
Bias
Calibration
GOCE
Gradiometer
Precise orbit determination
Scale factor

http://resolver.tudelft.nl/uuid:7acff12c-4ee9-4c4b-96fc-870948e12224

https://doi.org/10.1007/s00190-008-0235-8

Springer

1432-1394

Journal of Geodesy, 83 (1), 2009

Institutional Repository

journal article

(c) 2008 Visser, P.N.A.M.