Developing a Wave Energy Converter in Offshore Environments with Sea Ice

Developing a Wave Energy Converter in Offshore Environments with Sea Ice: Techno-Economic Assessment of a Point Absorber in Sea Ice

Kolset, Alexander (TU Delft Mechanical Engineering)

Lavidas, G. (mentor)
Hendrikse, H. (mentor)

Delft University of Technology

Offshore and Dredging Engineering

2024-05-03

In recent years, there has been growing interest in exploring the deployment of wave energy converters (WECs) in remote and harsh environments. However, research in this area remains limited, particularly concerning offshore environments with sea ice. This study focuses on investigating the energy production and economic feasibility of a point absorber in the Baltic Sea, specifically off the coast of Åland, which experiences seasonal ice cover. Four winter seasons with varying ice conditions are examined, ranging from ice-free to severe ice conditions. Additionally, the study aims to assess the survivability of the WEC under extreme level ice action and extreme wave conditions.

Based on literature review, a hexagonal slope-shaped buoy has shown promise in withstanding ice conditions up to 15 cm thickness in the Baltic Sea and is selected as the WEC design in this study. Metocean and sea ice data spanning from 2006 to 2021 are analysed from the NORA3 database. Through extreme value analysis, key parameters such as wave height, period, and ice thickness are determined. Survivability analysis is conducted to understand the forces exerted on the WEC during extreme ice load cases and extreme sea states. To evaluate energy production, hydrodynamic coefficients are computed using the Boundary Element Method solver Capytaine in the frequency domain. Subsequently, simulations are conducted using WEC-Sim to derive the power output of the WEC under varying sea states. Optimisation of the Power Take-Off (PTO) damping is performed to enhance performance for the specific site conditions. A comparison of power output is made among different WEC configurations with varying translator sizes.

The survivability analysis reveals important design considerations, especially regarding extreme ice conditions. When subjected to an extreme level ice thickness of 60 cm this results in calculated horizontal and vertical forces of 615 kN and 315 kN, respectively. In extreme sea states, simulations in WEC-Sim shows a maximum heave response of 4.16 m and a maximum heave force of 133 kN. Additionally, the investigation reveals significant fluctuations in wave energy converter (WEC) power production across the analysed winter seasons, characterised by varying ice conditions. During severe ice conditions (2009-2010), energy output decreased by nearly 50% compared to ice-free periods (2019-2020), potentially leading to a 95% increase in the levelised cost of energy (LCOE) if solely derived from that single season. These findings give valuable insights into the optimal WEC configuration, the maximising of power output and offer important considerations to WEC survivability for deployment in ice-covered regions.

Wave Energy Converter (WEC)
sea ice
Boundary element method
WECSim
Capytaine
Survivability

http://resolver.tudelft.nl/uuid:975560c9-0803-490e-9eae-82049152c773

Student theses

master thesis

© 2024 Alexander Kolset