Searched for: +
(1 - 20 of 31)

Pages

document
Kontakis, A. (author), Verschuur, D.J. (author)
In contrast to conventional acquisition practices, simultaneous source acquisition allows for overlapping wavefields to be recorded. Relaxing the shot schedule in this manner has certain advantages, such as allowing for faster acquisition and/or denser shot sampling. This flexibility usually comes at the cost of an extra step in the...
journal article 2023
document
Geleijnse, G. (author), Veder, L. L. (author), Hakkesteegt, M. M. (author), de Gier, H. H.W. (author), Rieger, B. (author), Metselaar, R. M. (author)
Objectives: Digital endoscopes are connected to a video processor that applies various operations to process the image. One of those operations is edge enhancement that sharpens the image. The purpose of this study was to (1) quantify the level of edge enhancement, (2) measure the effect on sharpness and image noise, and (3) study the...
journal article 2023
document
Wehrens, Martijn (author), Krah, Laurens H.J. (author), Towbin, Benjamin D. (author), Hermsen, Rutger (author), Tans, S.J. (author)
The inherent stochasticity of metabolism raises a critical question for understanding homeostasis: are cellular processes regulated in response to internal fluctuations? Here, we show that, in E. coli cells under constant external conditions, catabolic enzyme expression continuously responds to metabolic fluctuations. The underlying...
journal article 2023
document
Geleijnse, Geert (author), Rieger, B. (author)
SignificanceFlexible endoscopes are essential for medical internal examinations. Digital endoscopes are connected to a video processor that can apply various operations to enhance the image. One of those operations is edge enhancement, which has a major impact on the perceived image quality by medical professionals. However, the specific...
journal article 2022
document
Zhang, H. (author), Berkhout, Marco (author), Makinwa, K.A.A. (author), Fan, Q. (author)
This article presents a class-D amplifier (CDA) with high dynamic range (DR). To eliminate the typically dominant noise contribution of a resistive feedback network, the input and feedback signals are chopped and applied to a capacitive feedback network. However, this leads to high-voltage (HV) transients at the input of the loop filter,...
journal article 2022
document
Gravell, Benjamin (author), Mohajerin Esfahani, P. (author), Summers, Tyler H. (author)
The linear quadratic regulator (LQR) problem has reemerged as an important theoretical benchmark for reinforcement learning-based control of complex dynamical systems with continuous state and action spaces. In contrast with nearly all recent work in this area, we consider multiplicative noise models, which are increasingly relevant because...
journal article 2021
document
Weber, J.H. (author), Bu, R. (author), Cai, Kui (author), Schouhamer Immink, Kees A. (author)
Decoders minimizing the Euclidean distance between the received word and the candidate codewords are known to be optimal for channels suffering from Gaussian noise. However, when the stored or transmitted signals are also corrupted by an unknown offset, other decoders may perform better. In particular, applying the Euclidean distance on...
journal article 2020
document
Mäs, Michael (author), Helbing, D. (author)
Many sociological theories make critically different macropredictions when their microassumptions are implemented stochastically rather than deterministically. Deviations from individuals’ behavioral patterns described by microtheories can spark cascades that change macrooutcomes, even when deviations are rare and random. With two experiments...
journal article 2020
document
Manzaneque Garcia, T. (author), Steeneken, P.G. (author), Alijani, F. (author), Ghatkesar, M.K. (author)
Resonant sensors determine a sensed parameter by measuring the resonance frequency of a resonator. For fast continuous sensing, it is desirable to operate resonant sensors in a closed-loop configuration, where a feedback loop ensures that the resonator is always actuated near its resonance frequency, so that the precision is maximized even in...
journal article 2020
document
Mubarak, F.A. (author), Romano, R. (author), Galatro, L. (author), Mascolo, V. (author), Rietveld, Gert (author), Spirito, M. (author)
This paper analyzes and accurately models the complex noise behavior of vector network analyzers (VNAs) when measuring large-mismatch devices and subsequently shows how the VNA measurement noise performance is enhanced through implementation of a high-speed, broadband, active RF interferometer module. The presented VNA noise model provides a...
journal article 2019
document
Araghi, Y. (author), van Wee, G.P. (author), Kroesen, M. (author)
Historic vehicles (HVs) are the heritage of road transport that have surprisingly received little attention in the academic literature. This study presents an overview of the literature on HVs, focusing on the three topics that dominate the policy debate on transport: environmental, safety and congestion impacts. We observed that polluting...
journal article 2017
document
Madadi, I. (author), Tohidian, M. (author), Staszewski, R.B. (author)
A complex quadrature charge-sharing (CS) technique is proposed to implement a discrete-time band-pass filter (BPF) with a programmable bandwidth of 20–100 MHz. The BPF is part of a cellular superheterodyne receiver and completely determines the receiver frequency selectivity. It operates at the full sampling rate of up to 5.2 GHz corresponding...
journal article 2015
document
Panea, I. (author), Draganov, D.S. (author), AlmagroVidal, C. (author), Mocanu, V. (author)
We applied seismic interferometry (SI) by crosscorrelation to ambient-noise panels recorded in the Mizil area, Romania, aiming to retrieve body-wave reflections. To achieve this goal, surface waves in the noise panels input to SI should be suppressed. We did this by selecting for input to SI-only noise panels that are not dominated by surface...
journal article 2014
document
Berkhout, A.J. (author), Blacquière, G. (author)
We show that deblended shot records have a better background-related S/N than shot records in unblended surveys. This improvement increases with increasing blending fold and decreasing survey time. An interesting consequence of this property is that blended surveys can be carried out under more severe noise conditions than unblended surveys. It...
journal article 2013
document
Ishiyama, T. (author)
In a shallow water environment, mud-rolls are often dominant and appear as a prevailing coherent noise in OBC seismic data. Their complex properties make the noise elimination notably challenging in seismic processing. To address these challenges, we propose a dispersive multimodal mud-roll elimination method using a feedback-loop approach with...
journal article 2013
document
Berkhout, A.J. (author), Blacquière, G. (author)
If simultaneous shooting is carried out by incoherent source arrays, being the condition of blended acquisition, the deblending process generates shot records with a very low residual interference (blending noise). We found, theoretically and numerically, that deblended shot records had a better background-related signal-to-noise ratio than shot...
journal article 2013
document
Van Oven, J.C. (author), Berwald, F. (author), Berggren, K.K. (author), Kruit, P. (author), Hagen, C.W. (author)
This paper demonstrates electron-beam-induced deposition of few-nm-width dense features on bulk samples by using a scanning electron-beam lithography system. To optimize the resultant features, three steps were taken: (1) features were exposed in a repetitive sequence, so as to build up the deposited features gradually across the entire pattern,...
journal article 2011
document
Yates, S.J.C. (author), Baselmans, J.J.A. (author), Endo, A. (author), Janssen, R.M.J. (author), Ferrari, L. (author), Diener, P. (author), Baryshev, A.M. (author)
Microwave kinetic inductance detectors (MKIDs) have shown great potential for sub-mm instrumentation because of the high scalability of the technology. Here, we demonstrate for the first time in the sub-mm band (0.1–2 mm) a photon noise limited performance of a small antenna coupled MKID detector array and we describe the relation between photon...
journal article 2011
document
Zhang, W. (author), Khosropanah, P. (author), Gao, J.R. (author), Bansal, T. (author), Klapwijk, T.M. (author), Miao, W. (author), Shi, S.C. (author)
We report the measured sensitivities of a superconducting NbN hot electron bolometer (HEB) heterodyne receiver at 5.25 THz. Terahertz (THz) radiation is quasioptically coupled to a HEB mixer with a lens and a spiral antenna. Using a measurement setup with black body calibration sources and a beam splitter in vacuo, and an antireflection coated...
journal article 2010
document
Barends, R. (author), Vercruyssen, N. (author), Endo, A. (author), De Visser, P.J. (author), Zijlstra, T. (author), Klapwijk, T.M. (author), Baselmans, J.J.A. (author)
We report a reduction in the frequency noise in coplanar waveguide superconducting resonators. The reduction of 7 dB is achieved by removing the exposed dielectric substrate surface from the region with high electric fields and by using NbTiN. In a model-analysis the surface of NbTiN is found to be a negligible source of noise, experimentally...
journal article 2010
Searched for: +
(1 - 20 of 31)

Pages