Solid oxide fuel cells (SOFCs) fed with biogas containing hydrogen chloride traces: Impact on direct internal reforming and electrochemical performance

This study is particularly aimed at investigating the influence of hydrogen chloride traces in biogas on direct internal reforming in solid oxide fuel cells (SOFCs). The experiments are performed with simulated biogas containing methane to carbon dioxide ratio of 3:2, the usual average proportion in biogas. To the best of our knowledge, there...

Developing Solid Oxide F uel Cell Based Power Plant For Water Treatment Plants: Experimental and System Modelling Studies

Fossil fuels are currently the primary source for electrical power generation, which subsequently increases the rate of greenhouse gas (CO2, CH4) emission. It has been agreed at the Climate Change Conference 2015 in Paris (COP21) to reduce greenhouse gas emissions in order to limit the global temperature increase to less than 2°C compared to pre...

A solid oxide fuel cell fuelled by methane recovered from groundwater

This study investigates the feasibility of electricity production in a solid oxide fuel cell using methane recovered from groundwater as the fuel. Methane must be removed from groundwater for the production of drinking water to, amongst others, avoid bacterial regrowth. Instead of releasing methane to the atmosphere or converting it to carbon...

The effect of H₂S on internal dry reforming in biogas fuelled solid oxide fuel cells

Internal dry reforming of methane is envisaged as a possibility to reduce on capital and operation costs of biogas fuelled solid oxide fuel cells (SOFCs) system by using the CO₂ present in the biogas. Due to envisaged internal dry reforming, the requirement for biogas upgrading becomes obsolete, thereby simplifying the system...

Direct internal methane reforming in biogas fuelled solid oxide fuel cell; the influence of operating parameters

Internal dry reforming (IDR) of methane for biogas-fed solid oxide fuel cell (SOFC) applications has been experimentally investigated on planar Ni-GDC (cermet anode) electrolyte-supported cells. This study focuses on the effect of CO₂ concentration, current density, operating temperature, and residence time on internal methane dry...

Thermodynamic analysis of solid oxide fuel cell integrated system fuelled by ammonia from struvite precipitation process

Energy and exergy performance of ammonia fuelled solid oxide fuel cell (SOFC) integrated system in wastewater treatment plants (WWTPs) is evaluated in this study. Ammonia can be recovered through a struvite precipitation process in the form of an ammonia-water mixture (with 14 mol.% ammonia) and used as a carbon-free fuel. A series of...

Solid Oxide Fuel Cells fuelled with biogas: Potential and constraints

Anaerobic Digestion (AD) is used worldwide for treating organic waste and wastewater. Biogas produced can be converted using conventional energy conversion devices to provide energy efficient, integrated waste solutions. Typically, the electrical conversion-efficiency of these devices is 30–40% and is lowered due to biogas utilization instead...

Design, construction, and testing of a gasifier-specific solid oxide fuel cell system

This paper describes the steps involved in the design, construction, and testing of a gasifier-specific solid oxide fuel cell (SOFC) system. The design choices are based on reported thermodynamic simulation results for the entire gasifier- gas cleanup-SOFC system. The constructed SOFC system is tested and the measured parameters are compared...

Infiltration of commercially available, anode supported SOFC’s via inkjet printing

Commercially available anode supported solid oxide fuel cells (NiO-8YSZ/8YSZ/LSCF- 20 mm in diameter) were anode infiltrated with gadolinium doped ceria (CGO) using a scalable drop-on-demand inkjet printing process. Cells were infiltrated with two different precursor solutions—water based or propionic acid based. The saturation limit of the 0.5...