Balanced Magnetic Antenna for Partial Discharge Measurements in Gas-Insulated Substations

Recent research has found that Magnetic loop antennas can detect partial discharges (PD) in gas-insulated substations (GIS); however, unbalanced shielded loop (UBSL) antennas are affected by electric field coupling. This research proposes a balanced shielded loop (BSL) adapted for GIS PD sensing with different designs. The frequency response and...

Partial Discharge Charge Estimation In Gas-Insulated Substations Using Electric and Magnetic Antennas

Partial discharges (PD) measurements provide an estimation of the severity of the insulation degradation; additionally, it is used as a unit of standardization. Up to now, only the IEC 62478 briefly mentions partial discharge measurements using electromagnetic sensors in gas-insulated substations (GIS). The IEC60270 standard provides a method...

Test Bench and Frequency Response of a Magnetic Antenna used in GIS PD Measurements

Gas insulated substations (GIS) have increased in the electric power system in recent years and is expected to continue increasing in the following years. The GIS has remarkable advantages over air insulated substation in offshore windfarms where the installation space is limited. The outlying location of the GIS demands a robust monitoring...

Review of Partial Discharge Activity Considering Very-Low Frequency and Damped Applied Voltage

When detecting the presence of partial discharge (PD) activity in the insulation system in high-voltage equipment, the excitation voltages at variable frequency have been widely used instead of power-frequency (50/60 Hz) sinusoidal voltage in order to reduce the charging power. This work reviews the relevant research on PD activity at very low...

A magnetic loop antenna for partial discharge measurements on GIS

This paper presents a magnetic loop antenna for partial discharge (PD) measurements on gas insulated systems (GIS). The antenna is based on a single shielded loop inserted in the dielectric window of a GIS that measures the PD currents propagating in TEM mode. The paper describes the relevant parameters of the antenna and the antenna...

Density-based clustering methods for unsupervised separation of partial discharge sources

The recognition of partial discharge (PD) sources is an important task of the monitoring and diagnostics of high-voltage components. Nowadays, digital PD measuring systems have the capability of extracting features and form scatter plots with such data sets. Part of an unsupervised PD analysis system is to discover clusters within the data...

Simultaneous Electrical and UHF Measurement of DC-PD from Point-Plane Defect

Partial Discharges (PD) have long been studied under AC field stress and are widely accepted as a good indicator of component health. However, the advent of HVDC brought new challenges, as the pre-existing knowledge in the area of PD is not applicable to DC. The discharge behavior has been found to be erratic and there is no plausible evidence...