Using sky-classification to improve the short-term prediction of irradiance with sky images and convolutional neural networks

Clouds moving in front or away from the sun are the leading cause of irradiance variability. These variations have a repercussion on the electricity production of photovoltaic systems. Predicting such changes is essential for proper control of these systems and for maintaining grid stability. Images from the sky have proven to help with short...

Strategies for realizing high-efficiency silicon heterojunction solar cells

Silicon heterojunction (SHJ) solar cells have achieved a record efficiency of 26.81% in a front/back-contacted (FBC) configuration. Moreover, thanks to their advantageous high V_OC and good infrared response, SHJ solar cells can be further combined with wide bandgap perovskite cells forming tandem devices to enable efficiencies well...

A Comprehensive Workflow for High Resolution 3D Solar Photovoltaic Potential Mapping in Dense Urban Environment: A Case Study on Campus of Delft University of Technology

Photovoltaic (PV) technology is the most promising renewable energy source to be integrated on urban building surfaces. Modeling and simulating urban PV systems pose more challenges than the conventional ones installed in open field due to rich urban morphology. Herein, a comprehensive workflow to estimate urban solar PV potential is...

Realizing the Potential of RF-Sputtered Hydrogenated Fluorine-Doped Indium Oxide as an Electrode Material for Ultrathin SiO _x/Poly-Si Passivating Contacts

In high-efficiency silicon solar cells featuring carrier-selective passivating contacts based on ultrathin SiOx/poly-Si, the appropriate implementation of transparent conductive oxide (TCO) layers is of vital importance. Considerable deterioration in passivation quality occurs for thin poly-Si-based devices owing to the sputtering damage...

Strategy to mitigate the dipole interfacial states in (i)a-Si:H/MoOxpassivating contacts solar cells

Electrical simulations show that the dipole formed at (i)a-Si:H/MoOx interface can explain electrical performance degradation. We experimentally manipulate this interface by a plasma treatment (PT) to mitigate the dipole strength without harming the optical response. The optimal PT + MoOx stack results in strongly improved electrical...

Opto-electrical approaches for high efficiency and ultra-thin c-Si solar cells

The need for cost reduction requires using less raw material and cost-effective processes without sacrificing the conversion efficiency. For keeping high the generated photo-current, an advanced light trapping scheme for ultra-thin silicon wafers is here proposed, exhibiting absorptances up to 99% of 4n2 classical absorption limit for wafer...

Optimized back Reflectors for Rear Diffused c-Si Solar Cells

At present, research in c-Si solar cells is focused on increasing the efficiency while reducing the amount of used materials. Since silicon wafer and metal contribute up to 50% to the cost of a module, it is crucial to reduce the amount of these materials to fabricate cost-effective modules. In particular, for reducing the consumption of metal,...

Quadruple-junction thin-film silicon-based solar cells with high open-circuit voltage

Micro-textures for efficient light trapping and improved electrical performance in thin-film nanocrystalline silicon solar cells

Plasmonic silicon solar cells: Impact of material quality and geometry

We study n-i-p amorphous silicon solar cells with light-scattering nanoparticles in the back reflector. In one configuration, the particles are fully embedded in the zinc oxide buffer layer; In a second configuration, the particles are placed between the buffer layer and the flat back electrode. We use stencil lithography to produce the same...

Advanced Light Management Approaches for Thin-Film Silicon Solar Cells

Light management is important for improving the performance of thin-film solar cells. Advanced concepts of efficient light scattering and trapping inside the cell structures need to be investigated. An important tool for design and optimisation of the concepts present optical modelling and simulation. In the article a model of light scattering...

Modulated surface textures for enhanced scattering in thin-film silicon solar cells

Nano-scale randomly textured front transparent oxides are superposed on micro-scale etched glass substrates to form modulated surface textures. The resulting enhanced light scattering is implemented in single and double junction thin-film silicon solar cells.

3-D modeling of triple junction solar cells on 2-D gratings with optimized intermediate and back reflectors

Superstrate thin-film silicon triple-junction solar cells on 2-D gratings were optimized using opto-electrical modeling. Tuning the thickness of intermediate and back reflectors and the band gap of the middle cell resulted in 17% initial efficiency.

Modeling and optimization of white paint back reflectors for thin-film silicon solar cells

Diffusive dielectric materials such as white paint have been demonstrated as effective back reflectors in the photovoltaic technology. In this work, a one-dimensional (1D) optical modeling approach for simulation of white paint films is developed and implemented in a 1D optical simulator for thin-film solar cells. The parameters of white paint,...

Modulated surface textures for enhanced light trapping in thin-film silicon solar cells

Substrates with a modulated surface texture were prepared by combining different interface morphologies. The spatial frequency surface representation method is used to evaluate the surface modulation. When combining morphologies with appropriate geometrical features, substrates exhibit an increased scattering level in a broad wavelength region....