document

Development of a Retinal Eye Tracker for 3D Optical Coherence Tomography

Kramer, L. (author)

Several eye diseases appear in the posterior part of the eye, i.e. the retina or fundus. Retinal images therefore provide valuable information to identify eye diseases. Optical Coherence Tomography (OCT) is a 3D imaging technique that can image the retina with a resolution and depth penetration that can not be achieved by any other non-invasive...

master thesis 2016

document

Cavitation for improved sludge conversion into biogas

Stoop, A.H. (author), Bakker, T.W. (author), Kramer, H.J.M. (author)

In several studies the beneficial influence of pre-treatment of waste activated sludge with cavitation on the biogas production was demonstrated. It is however, still not fully certain whether this effect should be mainly contributed to an increase in conversion rate of organics into biogas by anaerobic bacteria, and how much cavitation...

conference paper 2015

document

High-throughput parallel SPM for metrology, defect, and mask inspection

Sadeghian Marnani, H. (author), Herfst, R.W. (author), Van den Dool, T.C. (author), Crowcombe, W.E. (author), Winters, J. (author), Kramer, G.F.I.J. (author)

Scanning probe microscopy (SPM) is a promising candidate for accurate assessment of metrology and defects on wafers and masks, however it has traditionally been too slow for high-throughput applications, although recent developments have significantly pushed the speed of SPM [1,2]. In this paper we present new results obtained with our...

conference paper 2014

document

Parallel, Miniaturized Scanning Probe Microscope for Defect Inspection and Review

Sadeghian Marnani, H. (author), Van den Dool, T.C. (author), Crowcombe, W.E. (author), Herfst, R.W. (author), Winters, J. (author), Kramer, G.F.I.J. (author), Koster, N.B. (author)

With the device dimensions moving towards the 1X node, the semiconductor industry is rapidly approaching the point where 10 nm defects become critical. Therefore, new methods for improving the yield are emerging, including inspection and review methods with sufficient resolution and throughput. Existing industrial tools cannot anymore fulfill...

conference paper 2014

document

Improvement of TPM implementation control at the Heineken Brewery Zoeterwoude

Kramer, M. (author)

After the turn of the millennium a global consolidation in the beer industry started. In 2012 the top 4 players in the market – including Heineken - represent 41% of the global market. In order to maintain the position of an independent market leader in this turbulent market, Heineken initiated a companywide improvement program called Total...

master thesis 2013

document

Improvement of TPM implementation control at the Heineken Brewery Zoeterwoude - Verbetering van TPM implementatie beheersing bij de Heineken Brouwerij Zoeterwoude

Kramer, M. (author)

master thesis 2013

document

Strategic positioning of the customer order decoupling point

Kramer, M. (author)

report 2013

document

Strategic positioning of the customer order decoupling point (summary)

Kramer, M. (author)

report 2013

document

Improvement of TPM implementation control at the Heineken Brewery Zoeterwoude - Verbetering van TPM implementatie beheersing bij de Heineken Brouwerij Zoeterwoude (summary)

Kramer, M. (author)

master thesis 2013

document

Sonocrystallization, Nucleation of ammonium sulfate and alfa-lactose monohydrate due to ultrasonic irradiation

Van de Graaf, J. (author), Soare, A. (author), Kramer, H.J.M. (author), Stankiewicz, A. (author)

Experiments were conducted to investigate the nucleation of ammonium sulfate and alfa-lactose monohydrate under ultrasonic irradiation

master thesis 2011

document

Numerical Investigation of the Impact of SES-Waterjet Interactions and Flow Non-uniformity on Pump Performance

Young, Yin Lu (author), Savander, Brant R. (author), Kramer, Matthew R. (author)

conference paper 2011

document

A unique growth mechanism of donut-shaped Mg–Al layered double hydroxides crystals revealed by AFM and STEM–EDX

Budhysutanto, W.N. (author), Van Den Bruele, F.J. (author), Rossenaar, B.D. (author), Van Agterveld, D. (author), Van Enckevort, W.J.P. (author), Kramer, H.J.M. (author)

Donut-like crystals of Mg–Al layered double hydroxides (LDH) are synthesized using a hydrothermal method with microwave heating. This morphology provides enlargement of the specific surface area of the {h k 0} faces, needed for adsorption application. The growth mechanism for donut-shaped crystals is proposed on the basis of AFM and STEM–EDX...

journal article 2010

document

Rolling Resistance in Rubber Coated Rollers

Kramer, H.W. (author)

One of the main methods of oil and gas transport at sea is performed by pipelines from the well or a platform offhore to another offshore structure or to land. Allseas is a company capable of installing these pipelines under various challenging operating conditions. In today's market, competition and oil and gas availability make it necessary...

master thesis 2009

document

US Navy High Speed Craft – Comparison of ABS and DNV Structural Requirements

Kramer, Raymond H. (author)

report 2005

document

Ontwerpen de layout van een fabriekshal met SLP (summary)

Kramer, P.J. (author)

master thesis 2002

document

Ontwerpen de layout van een fabriekshal met SLP

Kramer, P.J. (author)

master thesis 2002

document

Het Job Shop Scheduling Probleem (JSSP). Een literatuuronderzoek (summary)

Kramer, P.J. (author)

report 2001

document

Het Job Shop Scheduling Probleem (JSSP). Een literatuuronderzoek

Kramer, P.J. (author)

report 2001

document

Fatigue of aluminium structural weldments

Kramer, R.K. (author), Rampolla, B. (author), Magnusson, A. (author)

report 2000

document

Optimalisering van het logistieke systeem in een verkooporganisatie

Kramer, P.J. (author)

report 2000