Impact of the Current on Reverse Bias Degradation of Perovskite Solar Cells

Nonequal current generation in the cells of a photovoltaic module, e.g., due to partial shading, leads to operation in reverse bias. This quickly causes a significant efficiency loss in perovskite solar cells. We report a more quantitative investigation of the reverse bias degradation. Various small reverse biases (negative voltages) were...

Optical Simulation-Aided Design and Engineering of Monolithic Perovskite/Silicon Tandem Solar Cells

Monolithic perovskite/c-Si tandem solar cells have attracted enormous research attention and have achieved efficiencies above 30%. This work describes the development of monolithic tandem solar cells based on silicon heterojunction (SHJ) bottom- and perovskite top-cells and highlights light management techniques assisted by optical simulation...

Effects of (i)a-Si: H deposition temperature on high-efficiency silicon heterojunction solar cells

Excellent surface passivation induced by (i)a-Si:H is critical to achieve high-efficiency silicon heterojunction (SHJ) solar cells. This is key for conventional single-junction cell applications but also for bottom cell application in tandem devices. In this study, we investigated the effects of (i)a-Si:H deposition temperature on passivation...

Material Property Changes in Defects Caused by Reverse Bias Exposure of CIGS Solar Cells

Partial shading of Cu(In,Ga)Se₂ modules can lead to the formation of reverse bias induced wormlike defects. These wormlike defects act as local shunts and permanently decrease module output. A good understanding of the formation and propagation mechanisms of these defects is needed in order to mitigate the negative effects, or to...

High-efficiency black IBC c-Si solar cells with poly-Si as carrier-selective passivating contacts

In this work, we present the application of poly-Si carrier-selective passivating contacts (CSPCs) as both polarities in interdigitated back-contacted (IBC) solar cell architectures. We compared two approaches to form a gap between the back-surface field (BSF) and emitter fingers. It is proved that the gaps prepared by both approaches are...

Poly-Si(O)x passivating contacts for high-efficiency c-Si IBC solar cells

Highest conversion efficiency in crystalline silicon (c-Si) solar cells can be enabled by quenching minority carriers' recombination at c-Si/contact interface owing to carrier-selective passivating contacts. With the semi-insulating poly-crystalline silicon (SIPOS, poly-Si) a very good passivation of c-Si surfaces was obtained. We have...

Combination of Advanced Optical Modelling with Electrical Simulation for Performance Evaluation of Practical 4-terminal Perovskite/c-Si Tandem Modules

The perovskite solar cell is considered a promising candidate as the top cell for high-efficiency tandem devices with crystalline silicon (c-Si) bottom cells, contributing to the cost reduction of photovoltaic energy. In this contribution, a simulation method, involving optical and electrical modelling, is established to calculate the...