Searched for: subject%3A%22defect%22
(1 - 20 of 215)

Pages

document
Czél, László (author)
The thesis aimed to characterize the effects of manufacturing-induced defects, particularly gaps in variable stiffness laminates. The primary focus centered on designing a specimen capable of accurately characterizing gap effects. A refined, element-level specimen design featuring a controlled gauge zone was developed, based on pre-defined...
master thesis 2024
document
Tang, Zhuorui (author), Gu, Lin (author), Jin, Lei (author), Dai, Kefeng (author), Mao, Chaobin (author), Wu, Sanzhong (author), Zhang, Rongwei (author), Yang, Jinsong (author), Zhang, Kouchi (author)
In this work, 4H-SiC homoepitaxial layers were grown on 4°off-axis substrates at different susceptor rotation speeds by using a hot-wall horizontal CVD reactor. The effect of different susceptor rotation speed on the quality of 4H-SiC epitaxial layers in terms of thickness, thickness uniformity, crystallinity, surface morphology and...
journal article 2024
document
Xu, J. (author), Vecstaudza, Jana (author), Wesdorp, Marinus A. (author), Labberté, Margot (author), Salerno, Manuela (author), Kok, Joeri (author), van Rietbergen, Bert (author), van Osch, G.J.V.M. (author), Locs, Janis (author), Brama, Pieter A.J. (author)
Osteochondral defect repair with a collagen/collagen-magnesium-hydroxyapatite (Col/Col-Mg-HAp) scaffold has demonstrated good clinical results. However, subchondral bone repair remained suboptimal, potentially leading to damage to the regenerated overlying neocartilage. This study aimed to improve the bone repair potential of this scaffold by...
journal article 2024
document
Yun, Minghui (author), Yang, Daoguo (author), Cai, Miao (author), Yan, Haidong (author), Yu, Jiabing (author), Liu, Mengyuan (author), He, Siliang (author), Zhang, Kouchi (author)
Metal-oxide-semiconductor field-effect transistors (MOSFETs) undergo fatigue degradation under high thermal and electrical stresses. This process results in changes in their parasitic parameters, which can be detected using frequency domain reflectometry (FDR). Frequency domain impedance analysis is employed to characterize the various...
journal article 2024
document
Werlen, Vincent (author), Rytka, Christian (author), Dransfeld, C.A. (author), Brauner, Christian (author), Michaud, Véronique (author)
Modeling the consolidation of fiber-reinforced thermoplastic composites at the part level presents a formidable computational challenge due to the multi-scale nature of the process. In this article, a method to bypass the multi-scale problem by homogenizing the micro scale and describing the medium with characteristic parameters is described....
journal article 2024
document
Cornet, A.J. (author), Homborg, A.M. (author), Ravi Anusuyadevi, P. (author), 't Hoen-Velterop, L. (author), Mol, J.M.C. (author)
Despite extensive research, eliminating hexavalent chromium-based inhibitors from aerospace coatings remains challenging due to a lack of understanding of coating degradation during aircraft service. This study addresses the issue by investigating the protective mechanisms and aging processes of chromate-containing coatings on aircraft...
journal article 2024
document
Martin, H.A. (author), Xu, Haojia (author), Smits, Edsger C.P. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
This study introduces a training protocol utilizing Convolutional Neural Networks (CNNs) and Confocal Scanning Acoustic Microscopy (CSAM) imaging techniques to classify Power Quad Flat No-leads (PQFN) package delamination. The investigation involves empty PQFN packages with varied substrate metallizations subjected to thermal cycling. Four...
conference paper 2024
document
Tognan, A. (author), Patanè, Andrea (author), Laurenti, L. (author), Salvati, Enrico (author)
Accurate fatigue assessment of material plagued by defects is of utmost importance to guarantee safety and service continuity in engineering components. This study shows how state-of-the-art semi-empirical models can be endowed with additional defect descriptors to probabilistically predict the occurrence of fatigue failures by exploiting...
journal article 2024
document
Gali, Adam (author), Schleife, André (author), Heinrich, Andreas J. (author), Laucht, Arne (author), Schuler, Bruno (author), Chakraborty, Chitraleema (author), Anderson, Christopher P. (author), Déprez, C.C. (author), McCallum, Jeffrey (author)
Abstract: Quantum information processing and quantum sensing is a central topic for researchers who are part of the Materials Research Society and the Quantum Staging Group is providing leadership and guidance in this context. We convened a workshop before the 2022 MRS Spring Meeting and covered four topics to explore challenges that need to...
review 2024
document
Phusakulkajorn, W. (author), Hendriks, J.M. (author), Moraal, J. (author), Shen, C. (author), Zeng, Y. (author), Unsiwilai, S. (author), Bogojevic, B. (author), Asplund, Matthias (author), Zoeteman, A. (author), Nunez, Alfredo (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This work presents the results of a measurement campaign to demonstrate the effectiveness of the axle box acceleration (ABA) technology for detecting rail defects. The measurements were conducted along the Iron Ore line between Sweden and Norway for the IN2TRACK3 project. This line is mostly single-track with passenger-freight mixed traffic and...
conference paper 2024
document
Dekhovich, A. (author), Bessa, M.A. (author)
We introduce a new continual (or lifelong) learning algorithm called LDA-CP &S that performs segmentation tasks without undergoing catastrophic forgetting. The method is applied to two different surface defect segmentation problems that are learned incrementally, i.e., providing data about one type of defect at a time, while still being...
journal article 2024
document
Zhang, F. (author), Wu, Z. (author), Wang, Jianlin (author), Wu, Zhenduo (author), Zhao, C. (author), Eijt, S.W.H. (author), Schut, H. (author), van Dijk, N.H. (author), Brück, E.H. (author)
Recently, the all-d-metal Ni(Co)MnTi based Heusler compounds are found to have a giant magnetocaloric effect (GMCE) near room temperature and manifest different functionalities like multicaloric effects, which can be employed for solid-state refrigeration. However, in comparison to other traditional Heusler compounds, the relatively large...
journal article 2024
document
Heidekamp, Mathijs (author)
Resistive random access memory (RRAM) is an emerging memory technology that has the potential to replace dynamic random access memory (DRAM) or FLASH. The current memory technology suffer from scalability issues. RRAM can be used as potential replacement for Flash and DRAM. RRAM stores information using resistance states instead of charge. RRAM...
master thesis 2023
document
Tao, N. (author)
THICK composite materials, e.g., thickness of more than 50 mm, are increasingly being used across diverse industry sectors owing to their significant advantages of weightsavings, superiormaterial properties and load-carrying capability. These materials tend to be adopted in safety-critical applications such as large primary or secondary load...
doctoral thesis 2023
document
Wang, Y. (author)
Solid-state defect centers, such as the nitrogen-vacancy centers in diamond, represent a promising and versatile platform for quantum technologies. This thesis focuses on overcoming the challenge of noise in diamond to facilitate its practical use in various quantum technology applications.
doctoral thesis 2023
document
van den Wildenberg, Louise (author)
This project focuses on the development of a novel surgical tool designed to facilitate internal tissue closure in minimally invasive surgery, specifically targeting mesenteric defect closures during Gastric Bypass procedures. <br/>The tool incorporates innovative staples and barbed sutures, distinct from conventional methods and existing market...
master thesis 2023
document
Neji, Saliha (author)
Diamond color centers have been increasingly gaining attention in research due to their desirable optical properties that make them suitable for applications such as quantum computing, quantum sensing and quantum communication. However, the main challenge has been on-chip integration of diamond color centers with high scalability and high yield....
master thesis 2023
document
Müller, Britt (author)
Children with a Congenital Heart Defect (CHD) need to visit the outpatient clinic regularly their whole lives, often starting from birth. These hospital visits are frequently accompanied by feelings of anxiety and fear, which can have a detrimental impact on a child’s life. In collaboration with the Hospital Hero Foundation and the Willem...
master thesis 2023
document
Faucon, L.E.K. (author), Boot, T. (author), Riemslag, A.C. (author), Scott, S.P. (author), Liu, Ping (author), Popovich, V. (author)
In this work, the hydrogen fatigue of pipeline steel X60, its girth welds and weld defects were investigated through in situ fatigue testing. A novel in situ gaseous hydrogen charging fatigue set-up was developed, which involves a sample geometry that mimics a small-scale pipeline with high internal hydrogen gas pressure. The effect of hydrogen...
journal article 2023
document
Rafigh Doost, J. (author), Kolenov, D. (author), Pereira, S.F. (author)
It has been a widely growing interest in using silicon carbide (SiC) in high-power electronic devices. Yet, SiC wafers may contain killer defects that could reduce fabrication yield and make the device fall into unexpected failures. To prevent these failures from happening, it is very important to develop inspection tools that can detect,...
journal article 2023
Searched for: subject%3A%22defect%22
(1 - 20 of 215)

Pages