Non-destructive inspection technologies for repair assessment in materials and structures

Aging infrastructure globally faces degradation, posing risks and requiring substantial repair investment. Strategic maintenance practices are crucial for evaluating structural conditions and ensuring sustainability. The growing demands on modern materials and structures necessitate enhanced health monitoring approaches. Shifting from...

To measure is to know: Evaluating indirect measurement techniques for observing the damage tolerance behaviour of spot welded thermoplastic composites

In thermoplastic composite joints with a circular ultrasonic spot weld, the damage growth is located at the interface between the joined components. This means that any damage in these joints is invisible from the outside. This experimental study compares three different in-situ methods to measure the damage growth indirectly. The motivation...

EMC oxidation under high temperature aging

Epoxy molding compound (EMC) is widely used for encapsulating automotive electronics. Among all of the components of an electronic package, EMC is most exposed to the atmosphere, and thus undergoes aging. During high-temperature operation, EMC is oxidized, which alters its mechanical properties, and thus can affect the reliability of electronic...

Measuring Hydroelastic Deformation of Very Flexible Floating Structures

For Offshore Floating Photovoltaics (OFPV) applications, thin-film PV panels on lightweight floating support structures gain increasing scientific and commercial interest. Over the past years, several different concepts of thin-film OFPV have been proposed, with the common denominator of floating mattress or blanket-like support structures...

The effect of modified tannic acid (TA) eco-epoxy adhesives on mode I fracture toughness of bonded joints

Two synthesized eco-epoxy components based on TA: (A) glycidyl ether and (B) glycidyl phosphate ester, are used, as a replacement for the Bisphenol A (BPA) based epoxy component, for bonding aluminum (Al) and carbon fiber reinforced polymer (CFRP). Their effect on the mode I fracture toughness (GI) is evaluated by Double Cantilever Beam (DCB)...

Strain hardening cementitious composite (SHCC) for crack width control in reinforced concrete beams

Strain Hardening Cementitious Composite (SHCC) is an innovative material which, due to the special material composition and the addition of fibres, exhibits a controlled microcracking behaviour under tensile stresses. As such it might be a promising material for improvement of durability of concrete structures.<br/><br/>An experimental study was...