- document
-
Liu, Q. (author), Schlangen, H.E.J.G. (author), Van Bochove, G. (author)Porous asphalt shows excellent performance in both noise reduction and water drainage. Although porous asphalt has these great qualities, its service life is much shorter (sometimes only half) compared to dense graded asphalt roads. Ravelling, which is the loss of aggregate particles from the surface layer, is the main damage mechanism of porous...conference paper 2013
- document
-
Liu, Q. (author), Schlangen, H.E.J.G. (author), Van Bochove, G. (author)Porous asphalt shows excellent performance in both noise reduction and water drainage. Although porous asphalt has these great qualities, its service life is much shorter (sometimes only half) compared to dense graded asphalt roads. Ravelling, which is the loss of aggregate particles from the surface layer, is the main damage mechanism of porous...conference paper 2013
- document
-
Romero Rodriguez, C. (author), Chaves Figueiredo, S. (author), Chiaia, B. (author), Schlangen, E. (author)Cracking in concrete structures compromises the durability and functionality of the structures themselves. Different kinds of self-healing concretes, less or more sophisticated, have been developed in the past ten years to overcome early cracks in structures. An experimental study of a novel self-healing concrete is presented. Bitumen, used as...conference paper 2016
- document
-
Zhou, C. (author), Liu, X. (author), Apostolidis, P. (author)Low Temperature Asphalt (LTA) technologies are utilized in asphalt pavement industry to lower energy demands and greenhouse gas emission during mixing and construction processes. Although these technologies are currently available and hope to demonstrate similar performance with Hot Mix Asphalt (HMA) mixes, LTA shows more sensitive than HMA to...conference paper 2017
- document
-
Liu, Q. (author)Porous asphalt shows excellent performance in both noise reduction and water drainage. Although porous asphalt has these great qualities, its service life is much shorter (sometimes only half) compared to dense graded asphalt roads. Ravelling, which is the loss of aggregate particles from the surface layer, is the main damage mechanism of porous...doctoral thesis 2012
- document
-
Xu, S. (author)Porous asphalt, due to its advantages of noise reduction and water drainage, is widely used in the surface layer of the highway in the Netherlands. However, the porous structure makes it prone to ravelling, therefore more frequent maintenance and reconstruction than other asphalt mixtures The porous asphalt service life can be extended with self...doctoral thesis 2020
- document
-
García, Á. (author), Schlangen, E. (author), Van de Ven, M. (author), Van Vliet, D. (author)The objective of this research is to examine the induction heating of mastic through the addition of electrically conductive fillers and fibers (graphite and steel wool), and to prove that this material can be healed with induction energy. The effect of fibers content, sand–bitumen ratio and the combination of fillers and fibers on the induction...journal article
- document
-
García, A. (author), Schlangen, E. (author), Van de Ven, M. (author), Van Vliet, D. (author)It is well known that the healing rates of asphalt courses increase with the temperature. A new method, induction heating, is used in this paper to increase the lifetime of asphalt concrete pavements. Mastic will be first made electrically conductive by the addition of conductive fibers. Then it will be heated via induction energy. This will...journal article
- document
-
Tabakovic, A. (author), Faloon, Christopher (author), O’Prey, Declan (author)Conductive alginate capsules encapsulating a bitumen rejuvenator (HealRoad capsules) has demonstrated good healing abilities in pure bitumen and mortar mixes. HealRoad capsules can efficiently heal damage via induction heating. They also release the encapsulated rejuvenator, thereby rejuvenating aged bitumen. These findings indicate that...journal article 2022
- document
-
Xu, S. (author), Liu, X. (author), Tabakovic, A. (author), Schlangen, E. (author)Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect...journal article 2020
- document
-
Xu, S. (author), Liu, X. (author), Tabakovic, A. (author), Schlangen, E. (author)Self-healing asphalt, which is designed to achieve autonomic damage repair in asphalt pavement, offers a great life-extension prospect and therefore not only reduces pavement maintenance costs but also saves energy and reduces CO<sub>2</sub> emissions. The combined asphalt self-healing system, incorporating both encapsulated rejuvenator and...journal article 2021
- document
-
Tabakovic, A. (author), Mohan, Joseph (author), Karač, Aleksandar (author)This paper explores the potential use of conductive alginate capsules encapsulating a bitumen rejuvenator as a new extrinsic self-healing asphalt method. The capsules combine two existing self-healing asphalt technologies: (1) rejuvenator encapsulation and (2) induction heating to create a self-healing system that will provide rapid and...journal article 2021
- document
-
Ye, Xiangqian (author), Xiao, Zhenyong (author), He, Chuang (author), Li, Wenyu (author), Lin, P. (author), Meng, Yuanyuan (author), Hu, Chichun (author)This study systematically investigated the potential of waste carbon fibers (WCFs) as a sustainable solution in enhancing the multiple induction heating healing of asphalt mixture, thereby tackling two major concerns: the environmental impact of WCFs and the durability of asphalt pavement. Firstly, four groups of asphalt binder samples with...journal article 2023
- document
-
Post, W. (author), Bose, R.K. (author), Garcia, Santiago J. (author), van der Zwaag, S. (author)This work reports on the healing of early stage fatigue damage in ionomer/nano-particulate composites. A series of poly(ethylene-co-methacrylic acid) zinc ionomer/Fe3O4 nanoparticle composites with varying amounts of ionic clusters were developed and subjected to different levels of fatigue loading. The initiated damage was healed upon localized...journal article 2016
- document
-
González-Campo, A (author), Norambuena Contreras, J.E. (author), Storey, L. (author), Schlangen, E. (author)The concept of self-healing asphalt mixtures by bitumen temperature increase has been used by researchers to create an asphalt mixture with crack-healing properties by microwave or induction heating. Metals, normally steel wool fibers (SWF), are added to asphalt mixtures prepared with virgin materials to absorb and conduct thermal energy....journal article 2018
- document
-
Liu, Quantao (author), Li, Bin (author), Schlangen, E. (author), Sun, Yihan (author), Wu, Shaopeng (author)In this paper, steel slag/steel fiber composite asphalt mixture were prepared. The effects of the addition of steel slag and/or steel fibers on the mechanical, thermal, induction heating and healing properties of asphalt mixture were investigated. The results showed that adding steel slag and/or steel fibers improves the water stability,...journal article 2017
- document
-
Zhou, C. (author), Liu, X. (author), Apostolidis, P. (author), Scarpas, Athanasios (author), He, Liang (author)Low temperature asphalt (LTA) technologies, such as warm-mixed asphalt mixes, are utilized in the paving industry to lower energy demands and greenhouse gas emissions during asphalt mixing and pavement construction. However, the asphalt mixes developed that incorporate LTA additives are more sensitive than hot-mixed asphalts to temperature...journal article 2018
- document
-
Apostolidis, P. (author), Liu, X. (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)Induction heating driven polymerisation is an in-situ curing technique for epoxy-asphalt systems that maintains most of the advantages of temperature-driven polymerisation and it solves the need for longer curing time periods at lower temperatures before traffic can be allowed. In particular, induction heating can be utilised to accelerate the...journal article 2019
- document
-
Caglar, Hasan (author), Aksoy, Y.A. (author), Idapalapati, Sridhar (author), Caglar, Baris (author), Sharma, Mohit (author), Kerm Sin, Chian (author)We investigated the debonding on-demand (DoD) of adhesively bonded hybrid dissimilar joints by applying electromagnetic induction heating to the joint overlap section, wherein the epoxy resin is reinforced with iron oxide (Fe<sub>3</sub>O<sub>4</sub>) particles. Ti-6Al-4 V adherends were bonded with CFRP or GFRP adherends using neat/modified...journal article 2023