- document
-
Li, Peinan (author), Liu, Xue (author), Jiang, Xi (author), Zhang, X. (author), Wu, Jun (author), Chen, Peixin (author)Quasi-rectangular shield tunneling is a cutting-edge trenchless method for constructing metro tunnels with double tubes, owing to its advantages in saving underground space and reducing ground disturbance. However, the conventional quasi-rectangular shield tunneling method is not applicable when constructing a tunnel without a center pillar,...journal article 2024
- document
-
Chen, Y. (author), de Lima, Luiz Miranda (author), Li, Zhenming (author), Ma, Bin (author), Lothenbach, Barbara (author), Yin, Suhong (author), Yu, Qijun (author), Ye, G. (author)The synthesis of N-A-S-H gel with high Si/Al ratios (>2) has been rarely reported in the literature, leaving the establishment of a reliable synthesis route as an open challenge. This paper aims to synthesize N-A-S-H gels with Si/Al ratios ranging from 1 to 3 and establish their thermodynamic database. The effects of reaction temperature,...journal article 2024
- document
-
Xie, Binyang (author), He, Guanghua (author), Zhao, Chuankai (author), Jing, Penglin (author), Pal, S.K. (author), Iijima, Kazuhiro (author), Jin, Ruijia (author), Chen, Bangqi (author), Ghassemi, Hassan (author)In this paper, the hydroelasticity of two segmented ship models (Barge and KVLCC2) is investigated by experimental and numerical methods. A two-way Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) coupled method is adopted and further validated its accuracy against experimental results. The current approach emphasizes the...journal article 2024
- document
-
Wang, Xueling (author), Wang, Man (author), Chen, M. (author), Zhang, Yatao (author)Ceramic membranes have been increasingly employed in water treatment owing to their merits such as high-stability, anti-oxidation, long lifespan and environmental friendliness. The application of ceramic membranes mainly focuses on microfiltration and ultrafiltration processes, and some precise separation can be achieved by introducing novel...journal article 2023
- document
-
Chang, Z. (author), Liang, M. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)Cementitious materials may exhibit significant creep at very early age. This is potentially important for concrete 3D printing, where the material is progressively loaded even before it sets. However, does creep actually affect the buildability of 3D printed concrete? Herein, the influence of early-age creep on the buildability of 3D printed...journal article 2023
- document
-
Yu, Haoyuan (author), Zhang, Hanwen (author), Wang, Yanbo (author), Qin, Z. (author), Chen, Zhe (author), Bauer, P. (author)This article investigates the stability of triple active bridge (TAB) converter with different types of loads. In this paper, port2 of TAB converter adopts voltage control to supply a constant power load (CPL), and port3 uses voltage control to supply a resistor or uses current control to supply a battery. Then, an extra element theorem-based ...conference paper 2023
- document
-
Chen, Kewang (author), Vuik, Cornelis (author)Although Anderson acceleration AA(m) has been widely used to speed up nonlinear solvers, most authors are simply using and studying the stationary version of Anderson acceleration. The behavior and full potential of the non-stationary version of Anderson acceleration methods remain an open question. Motivated by the hybrid linear solver...journal article 2023
- document
-
Yang, Xinkui (author), Wu, Shaopeng (author), Xu, S. (author), Chen, B. (author), Chen, Dongyu (author), Wang, Fusong (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)Aimed to address the low utilization rate of steel slag (SS) and its challenge in resource utilization in China, this study developed ternary geopolymers made by high-content (50%) SS together with fly ash (FA) and granulated blast furnace slag (GBFS). The effects of GBFS content (0–40%) and curing methods (water curing, standard curing,...journal article 2023
- document
-
Chen, Y. (author), Chang, Z. (author), He, S. (author), Copuroglu, Oguzhan (author), Šavija, B. (author), Schlangen, E. (author)A good bond between the layers of 3D printed cementitious materials is a prerequisite for having high structural rigidity for the printed elements. However, the influence of printing process on an interlayer bond is still not well understood. This study investigates the influence of curing methods (i.e., air curing, plastic film covering, wet...journal article 2022
- document
-
Trabal, Guillem Gall (author), Bak, Brian Lau Verndal (author), Chen, B. Y. (author), Jensen, Simon Mosbjerg (author), Lindgaard, Esben (author)A numerical study on the feasibility of using patches of interface weakening or toughening material to trigger multiple delaminations toughening laminated composite structures against delamination is presented. The studies use an adaptive refinement formulation that uses cohesive elements to model delamination initiation and propagation. A DCB...conference paper 2022
- document
-
Trabal, Guillem Gall (author), Bak, Brian Lau Verndal (author), Chen, B. Y. (author), Lindgaard, Esben (author)A novel and efficient numerical formulation for the modelling of multiple delaminations growth in laminated composite materials subjected to quasi-static loading is presented. The proposed formulation alleviates the high computational cost associated with models featuring cohesive elements by using a novel Adaptive Refinement Scheme and an...journal article 2022
- document
-
Wang, L. (author), Li, S. (author), Wang, Ping (author), Chen, Rong (author), Li, Z. (author)The continuous homogeneous rail constraint of embedded rail system (ERS) is realized by the encapsulation of rails with the elastic poured compound (EPC) which is a composite material. Previous treatment of EPC as linear elastic material was insufficient in the failure analysis of ERS. In this work, a hyperelastic model is developed to...journal article 2022
- document
-
Zhang, Y. (author), Zhang, Shizhe (author), Chen, Y. (author), Copuroglu, Oguzhan (author)In this paper, both synthetic slag and commercial slag covering the common composition range were employed to estimate the correlation between slag chemistry and reactivity through hydraulicity and dissolution tests. It was found that slag reactivity was favorably affected by increasing Al<sub>2</sub>O<sub>3</sub> and MgO contents, while the...journal article 2022
- document
-
Chen, Y. (author), He, S. (author), Gan, Y. (author), Copuroglu, Oguzhan (author), Veer, F.A. (author), Schlangen, E. (author)This paper aims to provide a systematical review of the available printing strategies, sustainable cementitious materials and characterization methods for extrusion-based 3D concrete printing (3DCP). The printing strategies, consisting of printing setup, process, and material requirements, were summarized initially. In the material aspect,...journal article 2022
- document
-
Chen, Linfeng (author), Hulshoff, S.J. (author), Dong, Yuhong (author)The underlying physical mechanism of the residual-based large eddy simulation (LES) based on the variational multiscale (VMS) method is clarified. Resolved large-scale energy transportation equation is mathematically derived for turbulent kinetic energy budget analysis. Firstly, statistical results of benchmark turbulent channel flow at Re...journal article 2022
- document
-
Chen, Jing (author), Liu, X. (author), Zeng, Xiao Liang (author), Ye, Huai Yu (author), Zhang, Kouchi (author)Hexagonal boron nitride (BN) is often used as filler to improve the thermal conductivity of polymer matrix due to its high thermal conductivity. However, previously reported BN-based composites always have a high in-plane thermal conductivity, which is not beneficial for vertical heat dissipation. In addition, high BN content results in the...journal article 2022
- document
-
Singh, Umed (author), Kumar, Sachin (author), Chen, B. Y. (author)In this work, Floating Node Method (FNM), first developed for fracture modelling of laminate composites, is coupled with cell-wise strain Smoothed Finite Element Method (SFEM) for modelling 2D linear elastic fracture mechanics problems. The proposed method is termed as Smoothed Floating Node Method (SFNM). In this framework, FNM is used to...journal article 2022
- document
-
Trabal, Guillem Gall (author), Bak, Brian Lau Verndal (author), Chen, B. Y. (author), Carreras, Laura (author), Lindgaard, Esben (author)A novel efficient numerical formulation for the analysis of multiple fatigue-driven delamination cracks is presented. A cohesive zone model is used in combination with an Adaptive Refinement Scheme (ARS) and an Adaptive Floating Node Method (A-FNM) element that refine the model effectively during the analysis. Novel techniques are proposed to...journal article 2022
- document
-
Trabal, Guillem Gall (author), Bak, Brian Lau Verndal (author), Chen, B. Y. (author), Jensen, Simon Mosbjerg (author), Lindgaard, Esben (author)A numerical study on toughening laminated composite materials against delamination by initiating multiple interlaminar cracks is presented. Different configurations of interface toughening and weakening patches, that modify the interface properties at selected locations, are investigated as a way to trigger multiple delaminations. Both...journal article 2022
- document
-
Chen, Y. (author)How should we study the city? While there is diverse literature on research methodology, it is not easy to find a book that addresses the increasingly complex urban context and provides a comprehensive overview of current research methods applied in urban studies. Seeing the City: Interdisciplinary Perspectives on the Study of the Urban goes a...review 2021