Searched for: subject%3A%22method%22
(1 - 20 of 20)
List view
Grid view
document
Beyne, Egon (author)
The aerodynamic performance of a regional, propeller-powered strut-braced wing is investigated. The main wing planform and operating conditions are based on an ATR72, to which a strut and jury strut are added. The research focuses on the different drag components in cruise. The first research objective is to quantify the effect the different...
master thesis 2023
document
Sofia-Gabrion, Grégoire (author)
A series of numerical simulations was executed using the high-performance cluster at TU Delft's Aerospace Faculty. The primary objective was to gain deeper insights into the intricate dynamics of a sonic transverse jet in a supersonic crossflow with an oblique induced shock wave, especially concerning mixing. These simulations delved into the...
master thesis 2023
document
Lokken, Thomas (author)
With an increased demand for renewable energy wind farms, their efficiency receives growing attention from both the industry and academics. Mitigating wake interaction effects in wind farms is one of the ways wind farms could increase their efficiency. Control techniques to increase wake reenergizing are currently under development, however, are...
master thesis 2023
document
Başkaya, A.O. (author), Hickel, S. (author)
A conservative cut-cell immersed boundary (IB) method including gas-surface interactions (GSI) for the simulation of atmospheric entry flows under thermochemical nonequilibrium (TCNE) conditions is presented. The performance<br/>of the method is demonstrated for three test cases: a compression ramp, a cylinder, and a plasma wind tunnel ablator...
conference paper 2023
document
Kamel Targhi, Elahe (author), Emami Niri, Mohammad (author), Zitha, P.L.J. (author)
Cross-linked polymer gel is widely used in the oil and gas industry to block high permeability conduits and reduce water cut. The complex nature of this fluid, especially regarding flow in porous media, makes its numerical simulation very time-consuming. This study presents an approach to designing an Artificial Neural Network (ANN) model...
journal article 2023
document
Frontera Pericas, Pere (author)
Floating offshore wind turbines (FOWTs) have the potential to harness wind resources in deepwater, which is so far prohibitive for conventional approaches. This, however, comes at a cost: the platform’s extra degrees of freedom (DoFs) introduce complex aerodynamic and hydrodynamic behaviours. Therefore, FOWTs must be accurately modeled to reduce...
master thesis 2022
document
van der Wilt, Pieter (author)
The traditional Eulerian view of biomass in bioprocess modelling results in issues when modelling large-scale bioreactors in which heterogeneous conditions are common. As the field increasingly moves from “scale-up” to “scale-down” philosophy, in which such heterogeneities are included from the start of process design, accurate modelling of the...
bachelor thesis 2022
document
Kokkedee, Jop (author)
With an ever increasing demand for sustainable energy, limitations of current sustainable technologies are studied widely. In wind farms, the so-called wake effect provides the biggest limitation on wind farm total power output. Using wind from the unaffected boundary layer to re-energize the wind flow in the wake provides a method of limiting...
master thesis 2022
document
Dos Santos Pereira Malveiro, Carlos (author)
The most effective way to decrease the cost of energy of wind turbines is to increase the rotor diameter. Therefore, this calls for the need of aerodynamic research on large wind turbines. This thesis project will tackle the topics addressed by the IEA Wind Task 47 which is focused on the aerodynamic analysis and comparison of the newly proposed...
master thesis 2022
document
Dsouza, Brian (author)
Wind turbine power output has grown massively over the past few decades, and this has been achieved in part by increasing the size of rotors. But the size of rotors is now limited by structural constraints as well as space constraints in wind farms. It is therefore important to use other innovative methods to increase wind turbine capacity...
master thesis 2021
document
Chaves García-Mascaraque, Adrián (author)
A formulation based on the evaluation of power conversions within the system allows to overcome the limitations of conventional momentum analyses to study tightly coupled airframe-propulsion configurations such as Boundary Layer Ingestion. The so-called power balance method is applied in a CFD framework to gain insight about the application of...
master thesis 2021
document
Pál, Botond (author), Roekaerts, D.J.E.M. (author), Zandbergen, B.T.C. (author)
This study investigates the potential of a newly released multi-phase solver to simulate atomisation in an air-blast type atomiser. The 'VOF-to-DPM' solver was used to simulate primary and secondary atomisation in an atomiser with a coaxial injector-like geometry. The solver uses a hybrid Eulerian/Eulerian-Lagrangian formulation with...
journal article 2021
document
Khurana, Siddhant (author)
Over the past decades, numerous methods have been used to study acoustic liners through their impedance, of which numerical methods are of particular interest. Despite their advantages, numerical methods are bounded by certain drawbacks. One such drawback stems from the need to accurately discretize the liner geometry, which can lead to large...
master thesis 2020
document
Ballapur Jayasimha, Athreya (author)
Horizontal Axis Wind Turbines (HAWTs) are a very popular source of renewable energy, but these machines are often subject to off-design conditions owing to the unsteady nature of wind. Unsteady aerodynamic conditions have been associated with cyclic loading of turbine blades, which can have hugely detrimental effects on their operational life....
master thesis 2020
document
Shen, Zhongwei (author)
This master thesis presents the computation of free-surface flow phenomena with emphasis on ship hydromechanics. We perform a simulation of the heave and the pitch motion of the DTMB 5415M ship moving in head sea. To this purpose we employ an existing Arbitrary-Lagrangian-Eulerian residual-based variational multiscale method (ALE-RBVMS) to...
master thesis 2019
document
Rubino, A. (author)
The need to meet the increasingly demanding sustainability goals entails remarkable new challenges for technical innovation. Due to the crucial role of turbomachinery in present and future energy scenarios, advancements in turbomachinery performance by means of design methods represent a fundamental step towards global sustainable development....
doctoral thesis 2019
document
Dighe, V.V. (author), De Oliveira Andrade, G.L. (author), Avallone, F. (author), van Bussel, G.J.W. (author)
The complex aerodynamic interactions between the rotor and the duct has to be accounted for the design of ducted wind turbines (DWTs). A numerical study to investigate the characteristics of flow around the DWT using a simplified duct–actuator disc (AD) model is carried out. Inviscid and viscous flow calculations are performed to understand...
journal article 2019
document
Jia, Kangjun (author)
The transport of highly-viscous oil in the core-annular flow regime in a horizontal pipe is investigated with a numerical simulation study. In this flow type the viscous oil is lubricated by a water annulus along the pipe wall. The Launder-Sharma low-Reynolds number k-ε turbulence model is used with the Volume-of-Fluid solver in interFOAM. Three...
master thesis 2018
document
Manickathan, L. (author)
The wake geometry of a Vertical Axis Wind Turbine (VAWT) is unlike the standard Horizontal Axis Wind Turbine (HAWT). The blades of the turbine continuously passes through its own wake, creating complex wake-body interactions such as flow separation and dynamic stall, and convectional grid-based numerical method which is capable of describing...
master thesis 2014
document
Othmer, C. (author), Kaminski, T. (author), Giering, R. (author)
Topology optimization of fluid dynamical systems is still in its infancy, with its first academic realizations dating back to as late as three years ago. In this paper, we present two approaches to fluid dynamic topology optimization that are based on potential flows and adjoint states, respectively. Special emphasis is paid to the computation...
conference paper 2006
Searched for: subject%3A%22method%22
(1 - 20 of 20)
List view
Grid view